Edgar Filing: STONERIDGE INC

Unassociated Document

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

x	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2010

¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________to ________

Commission file number: 001-13337

STONERIDGE, INC.

(Exact name of registrant as specified in its charter)

Ohio		34-1598949
(State or other jurisdiction of		(I.R.S. Employer
incorporation or organization)		Identification No.)

9400 East Market Street, Warren, Ohio		44484
(Address of principal executive offices)		(Zip Code)

(330) 856-2443

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

Title of each class		Name of each exchange on which registered
Common Shares, without par value		New York Stock Exchange

Securities registered pursuant to section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

o Yes

x No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

o Yes

x No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

x Yes

o No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

o Yes

o No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer ¨	Accelerated filer x	Non-accelerated filer ¨	Smaller reporting company ¨
(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).

o Yes

x No

As of June 30, 2010, the aggregate market value of the registrant’s Common Shares, without par value, held by non-affiliates of the registrant was approximately $120.2 million. The closing price of the Common Shares on June 30, 2010 as reported on the New York Stock Exchange was $7.59 per share. As of June 30, 2010, the number of Common Shares outstanding was 25,440,338.

The number of Common Shares, without par value, outstanding as of February 8, 2011 was 25,994,265.

DOCUMENTS INCORPORATED BY REFERENCE

Definitive Proxy Statement for the Annual Meeting of Shareholders to be held on May 9, 2011, into Part III, Items 10, 11, 12, 13 and 14.

INDEX
		Page
PART I
Item 1.	Business	1
Item 1A.	Risk Factors	6
Item 1B.	Unresolved Staff Comments	13
Item 2.	Properties	14
Item 3.	Legal Proceedings	15
Item 4.	(Removed and Reserved)	15
PART II
Item 5.	Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	15
Item 6.	Selected Financial Data	17
Item 7.	Management's Discussion and Analysis of Financial Condition and Results of Operations	18
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	34
Item 8.	Financial Statements and Supplementary Data	36
Item 9.	Changes in and Disagreements With Accountants on Accounting and Financial Disclosure	69
Item 9A.	Controls and Procedures	69
Item 9B.	Other Information	71
PART III
Item 10.	Directors, Executive Officers and Corporate Governance	71
Item 11.	Executive Compensation	71
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	71
Item 13.	Certain Relationships and Related Transactions, and Director Independence	72
Item 14.	Principal Accounting Fees and Services	72
PART IV
Item 15.	Exhibits, Financial Statement Schedules	72

Signatures		73

PART I

Item 1. Business.

Overview

Founded in 1965, Stoneridge, Inc. (the “Company”) is a global designer and manufacturer of highly engineered electrical and electronic components, modules and systems for the commercial vehicle, automotive, agricultural and off-highway vehicle markets. Our products and systems are critical elements in the management of mechanical and electrical systems to improve overall vehicle performance, convenience and monitoring in areas such as emissions control, fuel efficiency, safety and security. Our extensive footprint, including our joint ventures, encompasses more than 25 locations in 14 countries and enables us to supply global and regional commercial vehicle, automotive, agricultural and off-highway vehicle manufactures around the world. Our custom-engineered products and systems are used to activate equipment and accessories, monitor and display vehicle performance and control, and distribute electrical power and signals. Our product offerings consist of (i) vehicle instrumentation systems, (ii) vehicle management electronics, (iii) application-specific switches and actuators, (iv) sensors and (v) power and signal distribution systems. We supply our products, predominantly on a sole-source basis, to many of the world’s leading commercial vehicle and automotive original equipment manufacturers, (“OEMs”), and select non-vehicle OEMs, as well as certain commercial vehicle and automotive tier one suppliers. These OEMs are increasingly utilizing electronic technology to comply with more stringent regulations (particularly emissions and safety) and to meet end-user demand for improved vehicle performance and greater convenience. As a result, per-vehicle electronic content has been increasing. Our technology and our partnership-oriented approach to product design and development enables us to develop next-generation products and to excel in the transition from mechanical-based components and systems to electrical and electronic components, modules and systems.

Products

We conduct our business in two reportable segments: Electronics and Control Devices. The Company’s operating segments are aggregated based on sharing similar economic characteristics. Other aggregation factors include the nature of the products offered and management and oversight responsibilities. The core products of the Electronics reportable segment include vehicle electrical power and distribution systems and electronic instrumentation and information display products. The core products of the Control Devices reportable segment include sensors, electronic and electrical switch products, valves and control actuation devices. We design and manufacture the following vehicle products:

Electronics. Our Electronics segment designs and manufactures electronic instrument clusters, electronic control units, driver information systems and electrical distribution systems (primarily wiring harnesses and connectors for electrical power and signal distribution). These products collect, store and display vehicle information such as speed, pressure, maintenance data, trip information, operator performance, temperature, distance traveled and driver messages related to vehicle performance. In addition, power distribution systems regulate, coordinate and direct the operation of the electrical system within a vehicle. These products use state-of-the-art hardware, software and multiplexing technology and are sold principally to the commercial vehicle, agricultural and off-highway vehicle markets. We also assemble entire instrument panels for the medium and heavy-duty truck markets that are configured specifically to the OEM customer’s specifications.

Control Devices. Our Control Devices segment designs and manufactures products that monitor, measure or activate specific functions within a vehicle. This segment includes product lines such as sensors, switches, valves, and actuators, as well as other electronic products. Sensor products are employed in major vehicle systems such as the emissions, safety, powertrain, braking, climate control, steering and suspension systems. Switches transmit signals that activate specific functions. Our switch technology is principally used in two capacities, user-activated and hidden. User-activated switches are used by a vehicle’s operator or passengers to manually activate headlights, rear defrosters and other accessories. Hidden switches are not typically visible to vehicle operators or passengers and are engaged to activate or deactivate selected functions as part of normal vehicle operations, such as brake lights. In addition, our Control Devices segment designs and manufactures electromechanical actuator products that enable OEMs to deploy power functions in a vehicle and can be designed to integrate switching and control functions. We sell these products principally to the automotive market.

The following table sets forth for the periods indicated, the percentage of net sales attributable to our product categories and reportable segments for the years ended December 31:

Product Category	Segment	2010			2009			2008

Vehicle electrical power & distribution systems	Electronics		41	%		40	%		40	%
Electronic instrumentation & information display products	Electronics		22			23			29
Total Electronics			63	%		63	%		69	%

Switch & position sensors	Control Devices		20	%		19	%		17	%
Actuator & temperature, pressure & speed sensors	Control Devices		17			18			14
Total Control Devices			37	%		37	%		31	%

Our products and systems are sold to numerous OEM and tier one supplier customers, in addition to aftermarket suppliers, for use on many different vehicle platforms. We supply multiple different parts to many of our principal customers under requirements contracts for a particular model. These contracts range in duration from one year to the production life of the model, which commonly extends for three to seven years. Approximately 68%, 67% and 70% of our net sales in 2010, 2009 and 2008, respectively, were derived from the commercial, agricultural and off-highway vehicle markets. Approximately 32%, 33% and 30% of our net sales in 2010, 2009 and 2008, respectively, were made to the automotive market.

For further information related to our reportable segments and financial information about geographic areas, see Note 12, “Segment Reporting,” to the consolidated financial statements included in this report.

Production Materials

The principal production materials used in the manufacturing process for both reportable segments include: copper wire, zinc, cable, resins, plastics, printed circuit boards, and certain electrical components such as microprocessors, memory devices, resistors, capacitors, fuses, relays and connectors. We purchase such materials pursuant to both annual contract and spot purchasing methods. Such materials are available from multiple sources, but we generally establish collaborative relationships with a qualified supplier for each of our key production materials in order to lower costs and enhance service and quality. As global demand for our production materials increases, we may have difficulties obtaining adequate production materials from our suppliers to satisfy our customers. Any extended period of time for which we cannot obtain adequate production material or which we experience an increase in the price of production material could materially affect our results of operations and financial condition.

Patents and Intellectual Property

We maintain and have pending various U.S. and foreign patents and other rights to intellectual property relating to both reportable segments of our business, which we believe are appropriate to protect the Company's interests in existing products, new inventions, manufacturing processes and product developments. We do not believe any single patent is material to our business, nor would the expiration or invalidity of any patent have a material adverse effect on our business or ability to compete. We are not currently engaged in any material infringement litigation, nor are there any material infringement claims pending by or against the Company.

Industry Cyclicality and Seasonality

The markets for products in both of our reportable segments have been cyclical. Because these products are used principally in the production of vehicles for the commercial, automotive, agricultural and off-highway markets, sales, and therefore results of operations, are significantly dependent on the general state of the economy and other factors, like the impact of environmental regulations on our customers, which affect these markets. A decline in commercial, automotive, agricultural and off-highway vehicle production of our principal customers could adversely impact the Company. Seasonality within the markets that we serve also impacts our operations.

Customers

We are dependent on several customers for a significant percentage of our sales. The loss of any significant portion of our sales to these customers or the loss of a significant customer would have a material adverse impact on our financial condition and results of operations. We supply numerous different parts to each of our principal customers. Contracts with several of our customers provide for supplying their requirements for a particular model, rather than for manufacturing a specific quantity of products. Such contracts range from one year to the life of the model, which is generally three to seven years. These contracts are subject to renegotiation, which may affect product pricing and generally may be terminated by our customers at any time. Therefore, the loss of a contract for a major model or a significant decrease in demand for certain key models or group of related models sold by any of our major customers could have a material adverse impact on the Company. We may also enter into contracts to supply parts, the introduction of which may then be delayed or cancelled. We also compete to supply products for successor models and are therefore subject to the risk that the customer will not select the Company to produce products on any such model, which could have a material adverse impact on our financial condition and results of operations. In addition, we sell products to other customers that are ultimately sold to our principal customers.

The following table presents our principal customers, as a percentage of net sales:

Years ended December 31	2010			2009			2008

Navistar International Corporation		24	%		27	%		26	%
Deere & Company		14			12			10
Ford Motor Company		8			9			6
General Motors Company		5			5			4
Chrysler Group LLC		4			4			6
Other		45			43			48
Total		100	%		100	%		100	%

Backlog

Our products are produced from readily available materials and have a relatively short manufacturing cycle; therefore our products are not on backlog status. Each of our production facilities maintains its own inventories and production schedules. Production capacity is adequate to handle current requirements and can be expanded to handle increased growth if needed.

Competition

The markets for our products in both reportable segments are highly competitive. The principal methods of competition are technological innovation, price, quality, performance, service and delivery. We compete for new business both at the beginning of the development of new models and upon the redesign of existing models. New model development generally begins two to five years before the marketing of such models to the public. Once a supplier has been selected to provide parts for a new program, an OEM customer will usually continue to purchase those parts from the selected supplier for the life of the program, although not necessarily for any model redesigns.

Our diversity in products creates a wide range of competitors, which vary depending on both market and geographic location. We compete based on strong customer relations and a fast and flexible organization that develops technically effective solutions at or below target price. We compete against the following primary competitors:

Electronics. Our primary competitors include Actia Group S.A., AEES, Bosch, Continental AG, Delphi Automotive LLP, Nexans SA and Yazaki Corporation.

Control Devices. Our primary competitors include BEI Sensors, Bosch, Continental AG, Delphi Automotive LLP, Denso Corporation, Hella KGaA Hueck & Co., Methode Electronics, Inc. and TRW Automotive Holdings Corp.

Product Development

Our research and development efforts for both reportable segments are largely product design and development oriented and consists primarily of applying known technologies to customer requests. We work closely with our customers to creatively solve customer requests using innovative approaches. The majority of our development expenses are related to customer-sponsored programs where we are involved in designing custom-engineered solutions for specific applications or for next generation technology. To further our vehicle platform penetration, we have also developed collaborative relationships with the design and engineering departments of key customers. These collaborative efforts have resulted in the development of new and complimentary products and the enhancement of existing products.

Our development work is largely performed on a decentralized basis. We have engineering and product development departments located at a majority of our manufacturing facilities. To ensure knowledge sharing among decentralized development efforts, we have instituted a number of mechanisms and practices whereby innovation and best practices are shared. The decentralized product development operations are complimented by larger technology groups in Canton, Massachusetts, Lexington, Ohio and Stockholm, Sweden. In addition, during 2010, we opened a product development center in Shanghai, China to focus on the developing Chinese market.

We use efficient and quality oriented work processes to address our customers’ high standards. Our product development technical resources include a full complement of computer-aided design and engineering (“CAD/CAE”) software systems, including (i) virtual three-dimensional modeling, (ii) functional simulation and analysis capabilities and (iii) data links for rapid prototyping. These CAD/CAE systems enable us to expedite product design and the manufacturing process to shorten the development time and ultimately time to market.

We have further strengthened our electrical engineering competencies through investment in equipment such as (i) automotive electro-magnetic compliance test chambers, (ii) programmable automotive and commercial vehicle transient generators, (iii) circuit simulators and (iv) other environmental test equipment. Additional investment in product machining equipment has allowed us to fabricate new product samples in a fraction of the time required historically. Our product development and validation efforts are supported by full service, on-site test labs at most manufacturing facilities, thus enabling cross-functional engineering teams to optimize the product, process and system performance before tooling initiation.

We have invested, and will continue to invest in technology to develop new products for our customers. Product development costs incurred in connection with the development of new products and manufacturing methods, to the extent not recoverable from the customer, are charged to selling, general and administrative expenses, as incurred. Such costs amounted to approximately $37.6 million, $33.0 million and $45.5 million for 2010, 2009 and 2008, respectively, or 5.9%, 6.9% and 6.0% of net sales for these periods.

We will continue shifting our investment spending toward the design and development of new products rather than focusing on sustaining existing product programs for specific customers, which allows us to sell our products to multiple customers. The typical product development process takes three to five years to show tangible results. As part of our effort to shift our investment spending, we reviewed our current product portfolio and adjusted our spending to either accelerate or eliminate our investment in these products, based on our position in the market and the potential of the market and product.

Environmental and Other Regulations

Our operations are subject to various federal, state, local and foreign laws and regulations governing, among other things, emissions to air, discharge to water and the generation, handling, storage, transportation, treatment and disposal of waste and other materials. We believe that our business, operations and facilities have been and are being operated in compliance, in all material respects, with applicable environmental and health and safety laws and regulations, many of which provide for substantial fines and criminal sanctions for violations.

Employees

Joint Ventures

We form joint ventures in order to achieve several strategic objectives including (i) diversifying our business by expanding in high-growth regions, (ii) employing complementary design processes, growth technologies and intellectual capital and (iii) realizing cost savings from combined sourcing. We have joint ventures in Brazil, PST Eletrônica S.A. (“PST”) and India, Minda Stoneridge Instruments Ltd. (“Minda”) and continue to explore similar business opportunities in other global markets. We have a 50% interest in PST and a 49% interest in Minda. We entered into our PST joint venture in October 1997 and our Minda joint venture in August 2004. Each of these investments is accounted for using the equity method of accounting.

PST specializes in the design, manufacture and sale of electronic vehicle security, vehicle tracking and infotainment devices. PST sells its products through the aftermarket distribution channel, to factory authorized dealer installers, also referred to as original equipment services and to OEMs. PST has experienced rapid growth driven by strong demand for vehicle security products in South America. PST generated net sales of $182.9 million, $140.7 million and $174.3 million in 2010, 2009 and 2008, respectively. We received dividend payments of $5.5 million, $7.3 million and $4.2 million from PST in 2010, 2009 and 2008, respectively.

Minda manufactures electromechanical/electronic instrumentation equipment primarily for the automotive, motorcycle and commercial vehicle markets. We leverage our investment in Minda by sharing our knowledge and expertise in electrical components and systems and expanding Minda’s product offering through the joint development of our products designed for the market in India.

Our joint ventures have contributed positively to our financial results in 2010, 2009 and 2008. Equity earnings by joint venture are summarized in the following table (in thousands):

Years ended December 31	2010		2009		2008

PST	$	9,490	$	7,385	$	12,788
Minda		856		390		702
Total equity earnings of investees	$	10,346	$	7,775	$	13,490

Executive Officers of the Company

Each executive officer of the Company is appointed by the Board of Directors, serves at its pleasure and holds office until a successor is appointed, or until the earlier of death, resignation or removal. The Board of Directors generally appoints executive officers annually. The executive officers of the Company are as follows:

Name	Age	Position

John C. Corey	63	President, Chief Executive Officer and Director
George E. Strickler	63	Executive Vice President, Chief Financial Officer and Treasurer
Thomas A. Beaver	57	Vice President of the Company and Vice President of Global Sales and Systems Engineering
Michael D. Sloan	54	Vice President of the Company and President of the Control Devices Division
Mark J. Tervalon	44	Vice President of the Company and President of the Electronics Division

John C. Corey, President, Chief Executive Officer and Director. Mr. Corey has served as President and Chief Executive Officer since being appointed by the Board of Directors in January 2006. Mr. Corey has served as a Director on the Board of Directors since January 2004. Prior to his employment with the Company, Mr. Corey served from October 2000, as President and Chief Executive Officer and Director of Safety Components International, a supplier of airbags and components, with worldwide operations. Mr. Corey has served as a Director and Chairman of the Board of Haynes International, Inc., a producer of metal alloys since 2004.

George E. Strickler, Executive Vice President, Chief Financial Officer and Treasurer. Mr. Strickler has served as Executive Vice President and Chief Financial Officer since joining the Company in January of 2006. Mr. Strickler was appointed Treasurer of the Company in February 2007. Prior to his employment with the Company, Mr. Strickler served as Executive Vice President and Chief Financial Officer for Republic Engineered Products, Inc. (“Republic”), from February 2004 to January of 2006. Before joining Republic, Mr. Strickler was BorgWarner Inc.’s Executive Vice President and Chief Financial Officer from February 2001 to November 2003.

Thomas A. Beaver, Vice President of the Company and Vice President of Global Sales and Systems Engineering. Mr. Beaver has served as Vice President of the Company and Vice President of Global Sales and Systems Engineering since January of 2005. Prior to that, Mr. Beaver served as Vice President of Stoneridge Sales and Marketing from January 2000 to January 2005.

Michael D. Sloan, Vice President of the Company and President of the Control Devices Division. Mr. Sloan has served as President of the Control Devices Division since July of 2009 and Vice President of the Company since December of 2009. Prior to that, Mr. Sloan served as Vice President and General Manager of Stoneridge Hi-Stat from February 2004 to July 2009.

Mark J. Tervalon, Vice President of the Company and President of the Stoneridge Electronics Division. Mr. Tervalon has served as President of the Stoneridge Electronics Division and Vice President of the Company since August of 2006. Prior to that, Mr. Tervalon served as Vice President and General Manager of the Electronic Products Division from May 2002 to December 2003 when he became Vice President and General Manager of the Stoneridge Electronics Group until August 2006.

Available Information

We make available, free of charge through our website (www.stoneridge.com), our Annual Report on Form 10-K (“Annual Report”), Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, all amendments to those reports, and other filings with the U.S. Securities and Exchange Commission (“SEC”), as soon as reasonably practicable after they are filed with the SEC. Our Corporate Governance Guidelines, Code of Business Conduct and Ethics, Code of Ethics for Senior Financial Officers, Whistleblower Policy and Procedures and the charters of the Board’s Audit, Compensation and Nominating and Corporate Governance Committees are posted on our website as well. Copies of these documents will be available to any shareholder upon request. Requests should be directed in writing to Investor Relations at 9400 East Market Street, Warren, Ohio 44484.

The public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F. Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains a website (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including the Company.

Item 1A. Risk Factors.

Set forth below are some of the principal risks and uncertainties that could cause our actual business results to differ materially from any forward-looking statements contained in this Annual Report. In addition, future results could be materially affected by general industry and market conditions, changes in laws or accounting rules, general U.S. and non-U.S. economic and political conditions, including a global economic slow-down, fluctuation of interest rates or currency exchange rates, terrorism, political unrest or international conflicts, political instability or major health concerns, natural disasters, commodity prices or other disruptions of expected economic and business conditions. These risk factors should be considered in addition to our cautionary comments concerning forward-looking statements in this Annual Report, including statements related to markets for our products and trends in our business that involve a number of risks and uncertainties. Our separate section, "Forward-Looking Statements," should be considered in addition to the following statements.

Our business is cyclical and seasonal in nature and downturns in the commercial, automotive, agricultural and off-highway vehicle markets could reduce the sales and profitability of our business.

The demand for our products is largely dependent on the domestic and foreign production of commercial, automotive, agricultural and off-highway vehicles. The markets for our products have been cyclical, because new vehicle demand is dependent on, among other things, consumer spending and is tied closely to the overall strength of the economy. Because our products are used principally in the production of vehicles for the commercial, automotive, agricultural and off-highway vehicle markets, our net sales, and therefore our results of operations, are significantly dependent on the general state of the economy and other factors which affect these markets. A decline in commercial, automotive, agricultural and off-highway vehicle production could adversely impact our results of operations and financial condition. In 2010, approximately 68% of our net sales were derived from commercial, agricultural and off-highway vehicle markets and approximately 32% were derived from the automotive market. Seasonality experienced by our served markets also impacts our operations.

We may not realize sales represented by awarded business.

We base our growth projections, in part, on commitments made by our customers. These commitments generally renew annually during a program life cycle. Failure of actual production orders from our customers to approximate these commitments could have a material adverse effect our business, financial condition or results of operations.

The prices that we can charge some of our customers are predetermined and we bear the risk of costs in excess of our estimates, in addition to the risk of adverse effects resulting from general customer demands for cost reductions and quality improvements.

Our supply agreements with some of our customers require us to provide our products at predetermined prices. In some cases, these prices decline over the course of the contract and may require us to meet certain productivity and cost reduction targets. In addition, our customers may require us to share productivity savings in excess of our cost reduction targets. The costs that we incur in fulfilling these contracts may vary substantially from our initial estimates. Unanticipated cost increases or the inability to meet certain cost reduction targets may occur as a result of several factors, including increases in the costs of labor, components or materials. In some cases, we are permitted to pass on to our customers the cost increases associated with specific materials. Cost overruns that we cannot pass on to our customers could adversely affect our business, financial condition or results of operations.

OEM customers have exerted considerable pressure on component suppliers to reduce costs, improve quality and provide additional design and engineering capabilities and continue to demand and receive price reductions and measurable increases in quality through their use of competitive selection processes, rating programs, and various other arrangements. We may be unable to generate sufficient production cost savings in the future to offset required price reductions. Additionally, OEMs have generally required component suppliers to provide more design engineering input at earlier stages of the product development process, the costs of which have, in some cases, been absorbed by the suppliers. Future price reductions, increased quality standards and additional engineering capabilities required by OEMs may reduce our profitability and have a material adverse effect on our business, financial condition or results of operations.

Our business is very competitive and increased competition could reduce our sales.

The markets for our products are highly competitive. We compete based on quality, service, price, performance, timely delivery and technological innovation. Many of our competitors are more diversified and have greater financial and other resources than we do. In addition, with respect to certain of our products, some of our competitors are divisions of our OEM customers. We cannot assure you that our business will not be adversely affected by competition or that we will be able to maintain our profitability if the competitive environment changes.

We are dependent on the availability and price of raw materials and other supplies.

We require substantial amounts of raw materials and other supplies and substantially all such materials we require are purchased from outside sources. The availability and prices of raw materials and other supplies may be subject to curtailment or change due to, among other things, new laws or regulations, suppliers’ allocations to other purchasers and interruptions in production by suppliers, changes in exchange rates and worldwide price levels. As demand for raw materials and other supplies increases as a result of a recovering economy, we may have difficulties obtaining adequate raw materials and other supplies from our suppliers to satisfy our customers. At times, we have experienced difficulty obtaining adequate supplies of semiconductors and memory chips for our Electronics segment and nylon and resins for our Control Devices segment. If we cannot obtain adequate raw materials and other supplies or if we experience an increase in the price of raw materials and other supplies, our business, financial condition or results of operations could be materially adversely affected.

We use a variety of commodities, including copper, zinc, resins and certain other commodities. Increasing commodity costs could have an impact on our results. We have sought to alleviate the impact of increasing costs by including a material pass-through provision in our customer contracts whenever possible and at times by selectively hedging a portion of our copper exposure. The inability to pass-through increasing commodity costs may have a material adverse effect on our business, financial condition or results of operations.

The loss or insolvency of any of our major customers would adversely affect our future results.

We are dependent on several principal customers for a significant percentage of our net sales. In 2010, our top three customers were Navistar International Corporation, Deere & Company and Ford Motor Company, which comprised 24%, 14% and 8% of our net sales, respectively. In 2010, our top ten customers accounted for 70% of our net sales. The loss of any significant portion of our sales to these customers or any other customers would have a material adverse impact on our results of operations and financial condition. The contracts we have entered into with many of our customers provide for supplying the customers’ requirements for a particular model, rather than for manufacturing a specific quantity of products. Such contracts range from one year to the life of the model, which is generally three to seven years. These contracts are subject to renegotiation, which may affect product pricing and generally may be terminated by our customers at any time. Therefore, the loss of a contract for a major model or a significant decrease in demand for certain key models or any group of related models sold by any of our major customers could have a material adverse impact on our results of operations and financial condition by reducing cash flows and our ability to spread costs over a larger revenue base. We also compete to supply products for successor models and are subject to the risk that the customer will not select us to produce products on any such model, which could have a material adverse impact on our business, financial condition or results of operations. In addition, we have significant receivable balances related to these customers and other major customers that would be at risk in the event of their bankruptcy.

Consolidation among vehicle parts customers and suppliers could make it more difficult for us to compete successfully.

The vehicle part supply industry has undergone a significant consolidation as OEM customers have sought to lower costs, improve quality and increasingly purchase complete systems and modules rather than separate components. As a result of the cost focus of these major customers, we have been, and expect to continue to be, required to reduce prices. Because of these competitive pressures, we cannot assure you that we will be able to increase or maintain gross margins on product sales to our customers. The trend toward consolidation among vehicle parts suppliers is resulting in fewer, larger suppliers who benefit from purchasing and distribution economies of scale. If we cannot achieve cost savings and operational improvements sufficient to allow us to compete successfully in the future with these larger, consolidated companies, our business, financial condition or results of operations could be adversely affected.

The emergence of significant competitors from bankruptcy may adversely affect us.

Certain of our significant competitors have recently emerged from bankruptcy protection. The bankruptcy protection afforded to these competitors has allowed them to eliminate or substantially reduce contractual obligations, including significant amounts of debt, and avoid liabilities. The elimination or reduction of these obligations has made these competitors stronger financially, which could have an adverse effect on our competitive position and results of operations. The emergence of other significant competitors from bankruptcy protection could have further adverse effects on our competitive position and our business, financial condition or results of operations.

Our physical properties and information systems are subject to damage as a result of disasters, outages or similar events.

Our offices and facilities, including those used for design and development, material procurement, manufacturing, logistics and sales are located throughout the world and are subject to possible destruction, temporary stoppage or disruption as a result of any number of unexpected events. If any of these facilities or offices was to experience a significant loss as a result of any of the above events, it could disrupt our operations, delay production, shipments and revenue, and result in large costs to repair or replace these facilities or offices.

In addition, network and information system shutdowns caused by unforeseen events such as power outages, disasters, hardware or software defects, computer viruses and computer security violations pose increasing risks. Such an event could also result in the disruption of our operations, delay production, shipments and revenue, and result in large expenditures necessary to repair or replace such network and information systems.

We must implement and sustain a competitive technological advantage in producing our products to compete effectively.

Our products are subject to changing technology, which could place us at a competitive disadvantage relative to alternative products introduced by competitors. Our success will depend on our ability to continue to meet customers’ changing specifications with respect to quality, service, price, timely delivery and technological innovation by implementing and sustaining competitive technological advances. Our business may, therefore, require significant ongoing and recurring additional capital expenditures and investment in product development and manufacturing and management information systems. We cannot assure you that we will be able to achieve the technological advances or introduce new products that may be necessary to remain competitive. Our inability to continuously improve existing products, to develop new products and to achieve technological advances could have a material adverse effect on our business, financial condition or results of operations.

We may experience increased costs and other disruptions to our business associated with labor unions.

As of December 31, 2010, we had approximately 6,800 employees, approximately 1,600 of whom were salaried and the balance of whom were paid on an hourly basis. Although we have no collective bargaining agreements covering U.S. employees, certain employees located in Estonia, France, Mexico, Spain, Sweden and the United Kingdom either (i) are represented by a union and are covered by a collective bargaining agreement or (ii) are covered by works council or other employment arrangements required by law. We cannot assure you that other of our employees will not be represented by a labor organization in the future or that any of our facilities will not experience a work stoppage or other labor disruption. Any work stoppage or other labor disruption involving our employees, employees of our customers (many of which customers have employees who are represented by unions), or employees of our suppliers could have a material adverse effect on our business, financial condition or results of operations by disrupting our ability to manufacture our products or reducing the demand for our products.

Compliance with environmental and other governmental regulations could be costly and require us to make significant expenditures.

Our operations are subject to various federal, state, local and foreign laws and regulations governing, among other things:

•

the discharge of pollutants into the air and water;

•

the generation, handling, storage, transportation, treatment, and disposal of waste and other materials;

•

the cleanup of contaminated properties; and

•

the health and safety of our employees.

Our business, operations and facilities are subject to environmental and health and safety laws and regulations, many of which provide for substantial fines for violations. The operation of our manufacturing facilities entails risks and we cannot assure you that we will not incur material costs or liabilities in connection with these operations. In addition, potentially significant expenditures could be required in order to comply with evolving environmental, health and safety laws, regulations or requirements that may be adopted or imposed in the future. Changes in environmental, health and safety laws, regulations and requirements or other governmental regulations could increase our cost of doing business or adversely affect the demand for our products.

We also may be required to investigate or clean up contamination resulting from past or current uses of our properties. At our Sarasota, Florida facility, for example, groundwater and soil contamination caused by operations before we acquired the facility will require future investigation and cleanup. This matter may have a material adverse impact on our business, financial condition or results of operations. Although no other environmental matters have been identified, other matters involving environmental contamination may also have a material adverse impact on our business, financial condition or results of operations.

We may incur material product liability costs.

We may be subject to product liability claims in the event that the failure of any of our products results in personal injury or death and we cannot assure you that we will not experience material product liability losses in the future. We maintain insurance against such product liability claims, but we cannot assure you that such coverage will be adequate for liabilities ultimately incurred or that it will continue to be available on terms acceptable to us. In addition, if any of our products prove to be defective, we may be required to participate in government-imposed or customer OEM-instituted recalls involving such products. A successful claim brought against us that exceeds available insurance coverage or a requirement to participate in any product recall could have a material adverse effect on our business, financial condition or results of operations.

Increased or unexpected product warranty claims could adversely affect us.

We provide our customers a warranty covering workmanship, and in some cases materials, on products we manufacture. Our warranty generally provides that products will be free from defects and adhere to customer specifications. If a product fails to comply with the warranty, we may be obligated or compelled, at our expense, to correct any defect by repairing or replacing the defective product. We maintain warranty reserves in an amount based historical trends of units sold and payment amounts combined with our current understanding of the status of existing claims. To estimate the warranty reserves, we must forecast the resolution of existing claims, as well as expected future claims on products previously sold. The amounts estimated to be due and payable could differ materially from what we may ultimately be required to pay. An increase in the rate of warranty claims or the occurrence of unexpected warranty claims could have a material adverse effect on our customer relations and our financial condition or results of operations.

Disruptions in the financial markets are adversely impacting the availability and cost of credit which could negatively affect our business.

The credit facility has a maximum borrowing level of $100.0 million and is scheduled to expire on November 1, 2012. The available borrowing capacity on this credit facility is based on eligible current assets, as defined. As of December 31, 2010, we had borrowing capacity of $61.3 million, based on eligible current assets. We will need to refinance the credit facility prior to its expiration. Disruptions in the financial markets, including the bankruptcy, insolvency or restructuring of certain financial institutions, and the general lack of liquidity may adversely impact the availability and cost of credit. We may be required to refinance the credit facility at terms and rates that are less favorable than our current terms and rates, which could adversely affect our business, financial condition or results of operations.

Our debt obligations could limit our flexibility in managing our business and expose us to risks.

We are highly leveraged. As of December 31, 2010, the face amount of our senior secured notes was $175.0 million. In addition, we are permitted under the credit facility and the indenture governing the senior secured notes to incur additional debt, subject to specified limitations. Our high degree of leverage and the terms of our indebtedness may have important consequences including the following:

•

we may have difficulty satisfying our obligations with respect to our indebtedness, and if we fail to comply with these requirements, an event of default could result;

•

we may be required to dedicate a substantial portion of our cash flow from operations to required payments on indebtedness, thereby reducing the availability of cash flow for working capital, capital expenditures and other general corporate activities;

•

covenants relating to our debt may limit our ability to obtain additional financing for working capital, capital expenditures and other general corporate activities;

•

covenants relating to our debt may limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;

•

we may be more vulnerable than our competitors to the impact of economic downturns and adverse developments in our business; and

•

we may be placed at a competitive disadvantage against any less leveraged competitors.

These and other consequences of our substantial leverage and the terms of our indebtedness could have a material adverse effect on our business, financial condition or results of operations.

Covenants in our credit facility and our indenture governing the senior secured notes may limit our ability to pursue our business strategies.

Our credit facility and the indenture governing our senior secured notes limit our ability to, among other things:

•

incur additional debt and guarantees;

•

pay dividends and repurchase our stock;

•

make other restricted payments, including investments;

•

create liens;

•

sell or otherwise dispose of assets, including capital stock of subsidiaries;

•

enter into agreements that restrict dividends from subsidiaries;

•

enter into transactions with our affiliates;

•

consolidate, merge or sell or otherwise dispose of all or substantially all of our assets; and

•

substantially change the nature of our business.

The agreement governing our credit facility also requires us to maintain a ratio of (1) consolidated EBITDA, as defined in the credit facility, less specified items to (2) consolidated fixed charges, as defined in the credit facility, of at least 1.10 to 1.00 whenever undrawn availability under the credit facility is less than $20 million. Our ability to comply with this fixed charge coverage ratio requirement, as well as the restrictive covenants under the terms of our indebtedness, may be affected by events beyond our control.

The restrictions contained in our indenture governing the senior secured notes and the agreement governing the credit facility could:

•

limit our ability to plan for or react to market conditions or meet capital needs or otherwise restrict our activities or business plans; and

•

adversely affect our ability to finance our operations, strategic acquisitions, investments or alliances or other capital needs or to engage in other business activities that would be in our interest.

A breach of any of the restrictive covenants under our indebtedness or our inability to comply with the fixed charge coverage ratio requirement in the credit facility could result in a default under the agreement governing the credit facility and the indenture governing the senior secured notes. If a default occurs, holders of the senior secured notes could declare all principal and interest to be due and payable, the lenders under the credit facility could elect to declare all outstanding borrowings, together with accrued interest and other fees, to be immediately due and payable and terminate any commitments they have to provide further borrowings, and holders of the senior secured notes and the credit facility lenders could pursue foreclosure and other remedies against us and our assets.

We may not be able to generate sufficient cash flows to meet our debt service obligations.

Our ability to make scheduled payments on, or to refinance, our obligations with respect to our indebtedness will depend on our financial and operating performance, which in turn will be affected by general economic conditions and by financial, competitive, regulatory and other factors beyond our control. We cannot assure you that our business will generate sufficient cash flow from operations or that future sources of capital will be available to us in an amount sufficient to enable us to service our indebtedness or to fund our other liquidity needs. If we are unable to generate sufficient cash flow to satisfy our debt obligations, we may have to undertake alternative financing plans, such as refinancing or restructuring our debt, selling assets, reducing or delaying capital investments or seeking to raise additional capital. We cannot assure you that any refinancing would be possible, that any assets could be sold or, if sold, of the timing of the sales and the amount of proceeds that may be realized from those sales, or that additional financing could be obtained on acceptable terms, if at all. The credit facility and the indenture governing the senior secured notes restrict our ability to dispose of assets and use the proceeds from the disposition. Our inability to generate sufficient cash flows to satisfy our debt obligations, or to refinance our indebtedness on commercially reasonable terms, would materially and adversely affect our business, financial condition and results of operations.

If we cannot make scheduled payments on our debt, we will be in default and, as a result, holders of the senior secured notes could declare all outstanding principal and interest to be due and payable, the lenders under the credit facility could terminate their commitments to lend us money, holders of the senior secured notes and the lenders under the credit facility could foreclose on or exercise other remedies against the assets securing the senior secured notes and borrowings under the credit facility and we could be forced into bankruptcy, liquidation or other insolvency proceedings, which, in each case, could result in your losing your investment in the Common Shares.

We are subject to risks related to our international operations.

Approximately 19.2% of our net sales in 2010 were derived from sales outside of North America. Non-current assets outside of North America accounted for approximately 8.7% of our non-current assets as of December 31, 2010. International sales and operations are subject to significant risks, including, among others:

•

political and economic instability;

•

restrictive trade policies;

•

economic conditions in local markets;

•

currency exchange controls;

•

labor unrest;

•

difficulty in obtaining distribution support and potentially adverse tax consequences; and

•

the imposition of product tariffs and the burden of complying with a wide variety of international and U.S. export laws.

Additionally, to the extent any portion of our net sales and expenses are denominated in currencies other than the U.S. dollar, changes in exchange rates could have a material adverse effect on our results of operations or financial condition.

We face risks arising from our equity investments in companies that we do not control.

Our consolidated results of operations include significant equity earnings from unconsolidated subsidiaries. For the year ended December 31, 2010, we recognized $10.3 million of equity earnings and received $5.5 million in cash dividends from our unconsolidated joint ventures, PST and Minda. Our ability to direct the operations of these entities is limited because we do not own a majority interest in either of them and we are bound by the terms of agreements with our joint venture partners. The performance of these joint ventures could also be adversely affected by disagreements between us and our joint venture partners, and sales of our equity interests in these entities are subject to rights of first refusal and other contractual limitations.

Our annual effective tax rate could be volatile and materially change as a result of changes in the mix of earnings and other factors.

Our overall effective tax rate is equal to our total tax expense as a percentage of our total earnings before tax. However, tax expense and benefits are not recognized on a global basis, but rather on a jurisdictional or legal entity basis. Losses in certain jurisdictions may not provide a current financial statement tax benefit. As a result, changes in the mix of earnings between jurisdictions, among other factors, could have a significant impact on our overall effective tax rate.

If we fail to protect our intellectual property rights or maintain our rights to use licensed intellectual property or are found liable for infringing the rights of others, our business could be adversely affected.

Our intellectual property, including our patents, trademarks, copyrights, trade secrets and license agreements, are important in the operation of our businesses, and we rely on the patent, trademark, copyright and trade secret laws of the United States and other countries, as well as nondisclosure agreements, to protect our intellectual property rights. We may not, however, be able to prevent third parties from infringing, misappropriating or otherwise violating our intellectual property, breaching any nondisclosure agreements with us, or independently developing technology that is similar or superior to ours and not covered by our intellectual property. Any of the foregoing could reduce any competitive advantage we have developed, cause us to lose sales or otherwise harm our business. We cannot assure you that any intellectual property will provide us with any competitive advantage or will not be challenged, rejected, cancelled, invalidated or declared unenforceable. In the case of pending patent applications, we may not be successful in securing issued patents, or securing patents that provide us with a competitive advantage for our businesses. In addition, our competitors may design products around our patents that avoid infringement and violation of our intellectual property rights.

We cannot be certain that we have rights to use all intellectual property used in the conduct of our businesses or that we have complied with the terms of agreements by which we acquire such rights, which could expose us to infringement, misappropriation or other claims alleging violations of third party intellectual property rights. Third parties have asserted and may assert or prosecute infringement claims against us in connection with the services and products that we offer, and we may or may not be able to successfully defend these claims. Litigation, either to enforce our intellectual property rights or to defend against claims regarding intellectual property rights of others, could result in substantial costs and in a diversion of our resources. Any such claims and resulting litigation could require us to enter into licensing agreements (if available on acceptable terms or at all), pay damages and cease making or selling certain products and could result in a loss of our intellectual property protection. Moreover, we may need to redesign some of our products to avoid future infringement liability. We also may be required to indemnify customers or other third parties at significant expense in connection with such claims and actions. Any of the foregoing could have a material adverse effect on our business, financial condition or results of operations.

Our inability to recover from natural or man-made disasters or similar events could adversely affect our business.

Our business and financial results may be affected by certain events that we cannot anticipate or that are beyond our control, such as natural or man-made disasters, national emergencies, significant labor strikes, work stoppages, political unrest, war or terrorist activities that could curtail production at our facilities and cause delayed deliveries and canceled orders. In addition, we purchase components, raw materials, information technology and other services from numerous suppliers, and, even if our facilities are not directly affected by such events, we could be affected by interruptions at such suppliers. Such suppliers may not be able to quickly recover from such events and may be subject to additional risks such as financial problems that limit their ability to conduct their operations. We cannot assure you that we will have insurance to adequately compensate us for any of these events.

We may not be able to successfully integrate acquisitions into our business or may otherwise be unable to benefit from pursuing acquisitions.

Failure to successfully identify, complete and/or integrate acquisitions could have a material adverse effect on us. A portion of our growth in sales and earnings has been generated from acquisitions and subsequent improvements in the performance of the businesses acquired. We expect to continue a strategy of selectively identifying and acquiring businesses with complementary products. We cannot assure you that any business acquired by us will be successfully integrated with our operations or prove to be profitable. We could incur substantial indebtedness in connection with our acquisition strategy, which could significantly increase our interest expense. Covenant restrictions relating to such indebtedness could restrict our ability to pay dividends, fund capital expenditures and consummate additional acquisitions. We anticipate that acquisitions could occur in geographic markets, including foreign markets, in which we do not currently operate. As a result, the process of integrating acquired operations into our existing operations may result in unforeseen operating difficulties and may require significant financial resources that would otherwise be available for the ongoing development or expansion of existing operations. Any failure to successfully integrate such acquisitions could have a material adverse impact on our business, financial condition or results of operations.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

The Company and its joint ventures currently own or lease 18 manufacturing facilities that are in use, which together contain approximately 1.6 million square feet of manufacturing space. Of these manufacturing facilities, 11 are used by our Electronics reportable segment, four are used by our Control Devices reportable segment and three are owned by our joint venture companies. The following table provides information regarding our facilities:

	Owned/		Square
Location	Leased	Use	Footage

Electronics
Juarez, Mexico	Owned	Manufacturing/Division Office		183,854
Portland, Indiana	Owned	Manufacturing		182,000
Chihuahua, Mexico	Owned	Manufacturing		135,569
Monclova, Mexico	Leased	Manufacturing		114,140
Tallinn, Estonia	Leased	Manufacturing		85,911
Walled Lake, Michigan	Leased	Manufacturing/Division Office		78,225
Orebro, Sweden	Leased	Manufacturing		77,472
Mitcheldean, England	Leased	Manufacturing (Vacant)		74,790
Chihuahua, Mexico	Leased	Manufacturing		61,619
El Paso, Texas	Leased	Warehouse		50,000
Chihuahua, Mexico	Leased	Manufacturing		49,805
Stockholm, Sweden	Leased	Engineering Office/Division Office		37,714
Dundee, Scotland	Leased	Manufacturing/Sales Office/Engineering Office		32,753
Portland, Indiana	Leased	Warehouse		25,000
Warren, Ohio	Leased	Engineering Office/Division Office		24,570
Chihuahua, Mexico	Leased	Engineering Office/Manufacturing		10,000
Bayonne, France	Leased	Sales Office/Warehouse		9,655
Stockholm, Sweden	Owned	Sales Office/Warehouse		2,013
Madrid, Spain	Leased	Sales Office/Warehouse		1,560
Rome, Italy	Leased	Sales Office		1,216

Control Devices
Lexington, Ohio	Owned	Manufacturing/Division Office		219,612
Canton, Massachusetts	Owned	Manufacturing		132,560
Sarasota, Florida	Owned	Manufacturing (Vacant)		115,000
Suzhou, China	Leased	Manufacturing/Warehouse/Division Office		25,737
Lexington, Ohio	Leased	Warehouse		15,000
Lexington, Ohio	Leased	Warehouse		7,788
Sarasota, Florida	Owned	Warehouse (Vacant)		7,500
Shanghai, China	Leased	Engineering Office/Sales Office		6,345
Lexington, Ohio	Leased	Manufacturing		2,700

Corporate
Novi, Michigan	Leased	Sales Office/Engineering Office		9,400
Warren, Ohio	Owned	Headquarters		7,500
Stuttgart, Germany	Leased	Sales Office/Engineering Office		1,000
Seoul, South Korea	Leased	Sales Office		330

Joint Ventures
Manaus, Brazil	Owned	Manufacturing		102,247
Pune, India	Owned	Manufacturing/Engineering Office/Sales Office		80,000
São Paulo, Brazil	Owned	Manufacturing/Engineering Office/Sales Office		45,467
Buenos Aires, Argentina	Leased	Sales Office		3,551

Item 3. Legal Proceedings.

We are involved in certain legal actions and claims arising in the ordinary course of business. However, we do not believe that any of the litigation in which we are currently engaged, either individually or in the aggregate, will have a material adverse effect on our business, consolidated financial position or results of operations. We are subject to the risk of exposure to product liability claims in the event that the failure of any of our products causes personal injury or death to users of our products and there can be no assurance that we will not experience any material product liability losses in the future. We maintain insurance against such product liability claims. In addition, if any of our products prove to be defective, we may be required to participate in a government-imposed or customer OEM-instituted recall involving such products.

Item 4. (Removed and Reserved)

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Our shares are listed on the New York Stock Exchange (“NYSE”) under the symbol “SRI.” As of February 8, 2011, we had 25,994,265 Common Shares without par value, issued and outstanding, which were owned by approximately 300 registered holders, including Common Shares held in the names of brokers and banks (so-called “street name” holdings) who are record holders with approximately 2,400 beneficial owners.

The Company has not historically paid or declared dividends, which are restricted under both the senior secured notes and the asset-based credit facility, on our Common Shares. We may only pay cash dividends in the future if immediately prior to and immediately after the payment is made, no event of default shall have occurred and outstanding indebtedness under our asset-based credit facility is not greater than or equal to $20.0 million before and after the payment of the dividend. We currently intend to retain earnings for acquisitions, working capital, capital expenditures, general corporate purposes and reduction in outstanding indebtedness. Accordingly, we do not expect to pay cash dividends in the foreseeable future.

High and low sales prices for our Common Shares for each quarter ended during 2010 and 2009 are as follows:

	Quarter Ended	High		Low

2010	March 31	$	10.23	$	6.00
	June 30	$	12.30	$	7.57
	September 30	$	11.53	$	7.02
	December 31	$	17.19	$	10.02
2009	March 31	$	4.80	$	1.41
	June 30	$	4.89	$	1.97
	September 30	$	7.20	$	3.70
	December 31	$	9.60	$	6.14

The Company did not repurchase any Common Shares in 2010 or 2009.

Set forth below is a line graph comparing the cumulative total return of a hypothetical investment in our Common Shares with the cumulative total return of hypothetical investments in the Morningstar Auto Parts Industry Group Index and the NYSE Composite Index based on the respective market price of each investment as of December 31, 2005, 2006, 2007, 2008, 2009 and 2010 assuming in each case an initial investment of $100 on December 31, 2005, and reinvestment of dividends.

	2005		2006		2007		2008		2009		2010

Stoneridge, Inc.	$	100	$	124	$	121	$	69	$	136	$	239
Morningstar Auto Parts Group Index (A)	$	100	$	113	$	121	$	52	$	115	$	200
NYSE Composite Index	$	100	$	120	$	131	$	80	$	102	$	116

(A)	The Morningstar Auto Parts Group Index was formerly known as the Hemscott Group – Industry Group 333 Index.

For information on “Related Stockholder Matters” required by Item 201(d) of Regulation S-K, refer to Item 12 of this report.

Item 6. Selected Financial Data.

The following table sets forth selected historical financial data and should be read in conjunction with the consolidated financial statements and notes related thereto and other financial information included elsewhere herein. The selected historical data was derived from our consolidated financial statements.

Years ended December 31 (in thousands, except per share data)	2010			2009			2008			2007			2006

Statement of Operations Data:
Net sales:
Electronics	$	414,337		$	311,268		$	533,328		$	458,672		$	456,932
Control Devices		240,894			176,815			236,038			289,979			271,943
Eliminations		(20,005	)		(12,931	)		(16,668	)		(21,531	)		(20,176	)
Total net sales	$	635,226		$	475,152		$	752,698		$	727,120		$	708,699

Gross profit	$	144,835		$	87,985		$	166,287		$	167,723		$	158,906

Operating income (loss) (A)	$	22,803		$	(18,243	)	$	(43,271	)	$	34,799		$	35,063

Equity in earnings of investees	$	10,346		$	7,775		$	13,490		$	10,893		$	7,125

Income (loss) before income taxes (A), (B)
Electronics	$	41,984		$	(13,911	)	$	38,713		$	20,692		$	20,882
Control Devices		15,153			(5,712	)		(78,858	)		15,825			13,987
Corporate interest		(20,163	)		(21,782	)		(20,708	)		(21,969	)		(21,622	)
Other corporate activities		(25,671	)		8,079			10,078			8,676			6,392
Total income (loss) before income taxes	$	11,303		$	(33,326	)	$	(50,775	)	$	23,224		$	19,639

Net income (loss) (A), (C)	$	10,625		$	(32,323	)	$	(97,527	)	$	16,671		$	14,513

Net income (loss) attributable to noncontrolling interest		(184	)		82			-			-			-

Net income (loss) attributable to Stoneridge, Inc. and subsidiaries (A), (C)	$	10,809		$	(32,405	)	$	(97,527	)	$	16,671		$	14,513

Basic net income (loss) per share (A), (C)	$	0.45		$	(1.37	)	$	(4.17	)	$	0.72		$	0.63

Diluted net income (loss) per share (A), (C)	$	0.44		$	(1.37	)	$	(4.17	)	$	0.71		$	0.63

Other Data:
Product development expenses	$	37,563		$	32,993		$	45,509		$	45,223		$	40,840
Capital expenditures	$	18,574		$	11,998		$	24,573		$	18,141		$	25,895
Depreciation and amortization (D)	$	19,285		$	19,939		$	26,399		$	28,503		$	26,180

Balance Sheet Data (as of December 31):
Working capital	$	134,062		$	142,896		$	160,387		$	184,788		$	135,915
Total assets	$	383,605		$	364,598		$	382,437		$	527,769		$	501,807
Long-term debt, less current portion	$	167,903		$	183,431		$	183,000		$	200,000		$	200,000
Shareholders' equity	$	88,088		$	74,057		$	91,758		$	206,189		$	178,622

(A)	Our 2008 operating loss, loss before income taxes, net loss, net loss attributable to Stoneridge, Inc. and subsidiaries and related basic and diluted net loss per share amounts includes a non-cash, pre-tax goodwill impairment loss of $65,175.

(B)

During the year ended December 31, 2010, we placed Stoneridge Pollak Limited (“SPL”) into administration. As a result, we recognized a gain within the Electronics reportable segment of $32,512 and losses within other corporate activities and within the Control Devices reportable segment of $32,039 and $473, respectively.

(C)	Our 2008 net loss, net loss attributable to Stoneridge, Inc. and subsidiaries and related basic and diluted net loss per share amounts includes a non-cash deferred tax asset valuation allowance of $62,006.

(D)	These amounts represent depreciation and amortization on fixed and certain finite-lived intangible assets.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Overview

We are a global designer and manufacturer of highly engineered electrical and electronic components, modules and systems for the commercial, automotive, agricultural and off-highway vehicle markets.

For the year ended December 31, 2010, net sales were $635.2 million, an increase of $160.0 million over our net sales for the year ended December 31, 2009 of $475.2 million. The increase in our net sales was primarily a result of the significant production volume increases experienced in our served markets during 2010. Net income for the year ended December 31, 2010 was $10.8 million, or $0.44 per diluted share, compared with a net loss of $32.4 million, or $(1.37) per diluted share, for 2009.

Our 2010 results were positively affected by improvements in the North American automotive and North American and European commercial vehicle markets as well as improvements in the global economy as a whole. Production volumes in the North American automotive vehicle market increased by 39.2% during the year ended December 31, 2010 when compared to the year ended December 31, 2009. This automotive vehicle market production volume increase had a positive effect on our North American automotive vehicle market net sales of approximately $50.2 million, primarily within our Control Devices segment. The commercial vehicle market production volumes in North America improved by 23.0% during the year ended December 31, 2010 when compared to the prior year, which resulted in increased net sales of approximately $30.8 million, primarily within our Electronics segment. Our net sales were also favorably affected by increased European commercial vehicle production volumes of 58.0% during the year ended December 31, 2010 as compared to the prior year. This increased production volume had a positive effect on our net sales of approximately $29.0 million, principally within the Electronics segment. Our 2010 net sales were further favorably affected by approximately $29.6 million, primarily within the Electronics segment due to production volume increases within the agricultural vehicle market. Our net sales to the agricultural vehicle market as a percentage of total net sales increased from 15.8% in 2009 to 17.9% for 2010. These increases in net sales were partially offset by unfavorable foreign currency exchange rates of approximately $1.7 million during the year ended December 31, 2010 when compared to the year ended December 31, 2009. Our gross margin percentage increased from 18.5% for the year ended December 31, 2009 to 22.8% for the current year. The increase in the current year gross margin percentage is largely a result of our increased sales in 2010 while substantially maintaining an overhead structure consistent with our 2009 level.

Our selling, general and administrative expenses (“SG&A”) increased from $106.2 million for the year ended December 31, 2009 to $122.0 million for the year ended December 31, 2010. This $15.8 million, or 14.9%, increase in SG&A was largely due to increased compensation and compensation related expenses. Excluding product development, our compensation and compensation related expenses increased by approximately $9.2 million from the prior year, primarily as a result of increased incentive compensation expenses. In addition, our product development costs increased by approximately $4.6 million between periods due to our support of new product launches by our customers.

During 2010 we issued $175.0 million of senior secured notes with a fixed interest rate of 9.5%. We used the proceeds from this issuance and cash-on-hand to extinguish our $183.0 million 11.5% senior notes. As a result of this extinguishment, we incurred a loss of $1.3 million, primarily related to the write-off of unamortized deferred financing costs associated with the extinguished senior notes. We refinanced this long-term liability in order to extend its maturity to October 15, 2017 and to reduce the interest rate on our debt. For approximately one month during 2010, both the senior secured notes and a portion of the senior notes were outstanding, resulting in duplicate interest of approximately $0.7 million, which negatively affected our financial results. This additional interest expense was offset entirely by reduced interest as a result of our lower principle balance, lower interest rate and the effect of our fixed-to-variable interest rate swap agreement which was entered into during October 2010.

Our results for the year ended December 31, 2010 were also favorably affected by the wind down of our wholly-owned subsidiary, Stoneridge Pollak Limited (“SPL”), located in Mitcheldean, United Kingdom. On February 23, 2010, we placed SPL into administration (a structured bankruptcy) in the United Kingdom. We had previously ceased SPL’s manufacturing operations in December of 2008, as part of the restructuring initiatives announced in October 2007. All SPL customer contracts were transferred to our other subsidiaries when we placed SPL into administration. We recognized a net gain within other expense (income), net of approximately $2.3 million, primarily from the reversal of the cumulative translation adjustment account, which had previously been included as a component of accumulated other comprehensive income within shareholders’ equity. In addition, we recognized a tax benefit of approximately $1.2 million from the reversal of deferred tax liabilities; primarily employee benefit related which were also previously included as a component of accumulated other comprehensive income.

At December 31, 2010 and December 31, 2009, we maintained a cash and cash equivalents balance of $72.0 million and $91.9 million, respectively. As discussed in Note 4 to the consolidated financial statements, we have no borrowings under our asset-based credit facility (the “credit facility”). At December 31, 2010 and December 31, 2009, we had borrowing capacity of $61.3 million and $54.1 million, respectively.

Outlook

The North American automotive vehicle market has recovered significantly from 2009 levels, which has had a favorable effect on our Control Devices segment’s results. North American automotive vehicle production was 11.9 million units for 2010. For 2011, this production volume is forecasted to be in the range of 12.5 million to 13.0 million units. If this forecasted increase in production volume occurs, it will favorably affect our Control Devices segment.

The North American and European commercial vehicle markets that we serve also recovered from 2009 levels. The medium-duty truck market, which represents nearly 65% of our sales volume in the North American commercial vehicle market, is forecasted to grow by 18% in 2011, with most of the increase coming in the second half of the year. In Europe, the commercial vehicle market is forecasted to grow by 30% in 2011. If these forecasted increases in production volumes occur, they will favorably affect our Electronics segment.

Agricultural vehicle production increased in 2010 when compared to 2009, which favorably affected both our Electronics and Control Devices segments. We believe that this market will continue to improve during 2011.

Through our restructuring activities initiated in prior years we have been able to reduce our cost structure. Our fixed overhead costs are lower due to the 2008 cessation of manufacturing operations at our Sarasota, Florida and Mitcheldean, United Kingdom locations. We were able to maintain our manufacturing capacity in light of these closures by transferring the manufacturing lines to other operating facilities. As our sales volumes have increased in 2010 our operating margin has benefited from our reduced cost structure. We believe that our 2011 results will continue to benefit from these restructuring activities.

As a result of our 2010 long-term debt refinancing, we expect to reduce our annual interest expense by approximately $4.1 million. We believe our 2011 interest expense will be further reduced by our fixed-to-variable interest rate swap.

Our 2011 results could be unfavorably affected by increased commodity prices, specifically copper. Copper prices increased during 2010 and have continued to increase in 2011. A portion of our 2011 sales will be subject to copper surcharge billings that will mitigate this increase in raw materials. Our 2011 results could also be unfavorably affected by foreign currency exchange rates. We have significant foreign denominated transaction exposure in certain locations especially in Mexico and Sweden.

During 2010, we experienced component shortages in our supply base, which has had an adverse effect on our results. Continued or escalated component shortages in our supply base may adversely affect our results.

Results of Operations

We are primarily organized by markets served and products produced. Under this organizational structure, our operations have been aggregated into two reportable segments: Electronics and Control Devices. The Electronics reportable segment includes results of operations that design and manufacture electronic instrument clusters, electronic control units, driver information systems and electrical distribution systems, primarily wiring harnesses and connectors for electrical power and signal distribution. The Control Devices reportable segment includes results of operations that design and manufacture sensors, switches, valves and actuators.

Year Ended December 31, 2010 Compared To Year Ended December 31, 2009

Net Sales. Net sales for our reportable segments, excluding inter-segment sales are summarized in the following table (in thousands):

									Dollar		Percent
Years ended December 31	2010				2009				increase		increase

Electronics	$	397,630	62.6	%	$	301,424	63.4	%	$	96,206		31.9	%
Control Devices		237,596	37.4			173,728	36.6			63,868		36.8	%
Total net sales	$	635,226	100.0	%	$	475,152	100.0	%	$	160,074		33.7	%

Our Electronics segment was positively affected by increased volume in our served markets by approximately $83.7 million for the year ended December 31, 2010 when compared to the prior year. The increase in net sales for our Electronics segment was primarily due to volume increases in our North American and European commercial vehicle products. Commercial vehicle market production volumes in North America and Europe increased by 23.0% and 58.0%, respectively, during the year ended December 31, 2010 when compared to the prior year. The increase in North American and European commercial vehicle production positively affected net sales in our Electronics segment for the year ended December 31, 2010 by approximately $31.4 million, or 21.4%, and $28.8 million, or 36.2%, respectively. Net sales within our Electronics segment were also favorably affected by approximately $23.8 million as a result of production volume increases in the agricultural vehicle market during the year ended December 31, 2010 when compared to the prior year. These increases were partially offset by unfavorable foreign exchange rates of approximately $1.7 million for the year ended December 31, 2010 when compared to the year ended December 31, 2009.

Our Control Devices segment was positively affected by increased volume in our served markets by approximately $55.7 million for the year ended December 31, 2010 when compared to the prior year. The increase in net sales for our Control Devices segment was primarily attributable to production volume increases at our major customers in the North American automotive vehicle market, which increased by 39.2% during the year ended December 31, 2010 when compared to the year ended December 31, 2009. Volume increases within the automotive vehicle market of our Control Devices segment increased net sales for the year ended December 31, 2010 by approximately $50.4 million, or 35.3%, when compared to the prior year. Control Devices net sales were approximately $5.7 million higher for 2010, when compared to 2009 as a result of production volume increases within the agricultural vehicle market.

Net sales by geographic location are summarized in the following table (in thousands):

									Dollar		Percent
Years ended December 31	2010				2009				increase		increase

North America	$	513,455	80.8	%	$	384,467	80.9	%	$	128,988		33.5	%
Europe and other		121,771	19.2			90,685	19.1			31,086		34.3	%
Total net sales	$	635,226	100.0	%	$	475,152	100.0	%	$	160,074		33.7	%

The North American geographic location consists of the results of our operations in the United States and Mexico.

The increase in North American net sales was primarily attributable to increased sales volume in our North American automotive and commercial vehicle markets. These increased volume levels had a positive effect on our net sales for the year ended December 31, 2010 of $50.2 million and $30.8 million for our North American automotive and commercial vehicle markets, respectively. Production volume increases within the agricultural vehicle market during the year ended December 31, 2010 favorably affected our North American net sales by approximately $27.8 million. Our increase in net sales outside North America was primarily due to increased sales of European commercial vehicle market products, which had a positive effect on our net sales for the year ended December 31, 2010 of approximately $29.0 million.

Consolidated statements of operations as a percentage of net sales are presented in the following table (in thousands):

											Dollar
											increase/
Years ended December 31	2010					2009					(decrease)

Net sales	$	635,226		100.0	%	$	475,152		100.0	%	$	160,074

Costs and Expenses:
Cost of goods sold		490,391		77.2			387,167		81.5			103,224
Selling, general and administrative		122,032		19.2			106,228		22.4			15,804

Operating income (loss)		22,803		3.6			(18,243	)	(3.9	)		41,046

Interest expense, net		21,780		3.4			21,965		4.6			(185	)
Equity in earnings of investees		(10,346	)	(1.6	)		(7,775	)	(1.6	)		(2,571	)
Loss on early extinguishment of debt		1,346		0.2			-		-			1,346
Other expense (income), net		(1,280	)	(0.2	)		893		0.2			(2,173	)

Income (loss) before income taxes		11,303		1.8			(33,326	)	(7.1	)		44,629

Provision (benefit) for income taxes		678		0.1			(1,003	)	(0.2	)		1,681

Net income (loss)		10,625		1.7			(32,323	)	(6.9	)		42,948

Net income (loss) attributable to noncontrolling interest		(184	)	-			82		-			(266	)

Net income (loss) attributable to Stoneridge, Inc. and subsidiaries	$	10,809		1.7	%	$	(32,405	)	(6.9	)%	$	43,214

Cost of Goods Sold. The decrease in cost of goods sold as a percentage of net sales was primarily due to the significant increase in volume of our European commercial vehicle and North American commercial, automotive and agricultural vehicle markets during the year ended December 31, 2010 when compared to the prior year, while maintaining our 2009 fixed overhead cost structure. A portion of our cost structure is relatively fixed in nature, such as overhead and depreciation costs. These fixed costs combined with significantly higher net sales in 2010, resulted in a lower cost of goods sold as a percentage of net sales for the year ended December 31, 2010. Our material cost as a percentage of net sales for our Electronics segment for the year ended December 31, 2010 and 2009 was 56.4% and 55.4%, respectively. This increase is largely due to higher commodity prices incurred during the year ended December 31, 2010. Our material cost as a percentage of net sales for the Control Devices segment increased slightly from 52.9% for the year ended December 31, 2009 to 53.0% for the year ended December 31, 2010.

Selling, General and Administrative Expenses. Product development expenses included in SG&A were $37.6 million and $33.0 million for 2010 and 2009, respectively. The increase in product development costs is a result of our customers’ new product launches in the near term. The increase in SG&A costs excluding product development expenses was mainly due to higher employee related costs of approximately $9.2 million, primarily incentive compensation. Our SG&A costs decreased as a percentage of net sales because of the increase in net sales recognized in the current period when compared to the prior year period.

Costs from our restructuring initiatives for the year ended December 31, 2010 decreased compared to the year ended December 31, 2009 as a result of our restructuring initiatives nearing completion. Costs incurred during the year ended December 31, 2010 related to restructuring initiatives amounted to approximately $0.3 million and were comprised of one-time termination benefits and contract termination costs. These restructuring actions within our Electronics segment were a combination of severance costs as a result of the continuation of restructuring initiatives which began in 2009 and related to our cancelled lease in Mitcheldean, United Kingdom. Restructuring charges for the year ended December 31, 2009 were approximately $3.7 million and were primarily comprised of one-time termination benefits. These restructuring actions were in response to the depressed conditions in the European and North American commercial vehicle markets as well as the North American automotive vehicle market. Restructuring expenses that were general and administrative in nature were included in the Company’s consolidated statements of operations as a component of SG&A, while the remaining restructuring related expenses were included in cost of goods sold.

Restructuring charges, general and administrative in nature, recorded by reportable segment during the year ended December 31, 2010 were as follows (in thousands):

	Electronics		Control Devices		Total consolidated restructuring charges

Severance costs	$	183	$	-	$	183
Contract termination costs		121		-		121
Total general and administrative restructuring charges	$	304	$	-	$	304

All restructuring charges result in cash outflows. Severance costs related to a reduction in workforce. Contract termination costs represent expenditures associated with long-term lease obligations that were cancelled as part of the restructuring initiatives.

Restructuring charges, general and administrative in nature, recorded by reportable segment during the year ended December 31, 2009 were as follows (in thousands):

	Electronics		Control Devices		Total consolidated restructuring charges

Severance costs	$	2,237	$	1,034	$	3,271
Contract termination costs		374		-		374
Total general and administrative restructuring charges	$	2,611	$	1,034	$	3,645

Equity in Earnings of Investees. The increase in equity earnings of investees was attributable to the increase in equity earnings recognized from our PST and Minda joint ventures. Equity earnings for PST increased from $7.4 million for the year ended December 31, 2009 to $9.5 million for the year ended December 31, 2010. The increase primarily reflects higher volumes for PST’s product lines and new product launches during the year ended December 31, 2010. In addition, PST benefited from favorable foreign currency fluctuations during the year ended December 31, 2010 when compared to 2009 of approximately $0.5 million. Equity earnings for Minda increased from $0.4 million for the year ended December 31, 2009 to $0.9 million for the year ended December 31, 2010. This increase primarily reflects higher volumes for Minda’s products during the current year.

Loss on Early Extinguishment of Debt. In 2010, we recognized a loss of $1.3 million on early extinguishment of our $183.0 million senior notes. This loss was primarily comprised of a $1.0 million charge related to the write-off of unamortized deferred financing costs associated with the extinguished senior notes. In addition, we incurred $0.3 million of expenses for premiums paid to senior note holders whom tendered their notes early and professional fees associated with the tender offer.

Other Expense (Income), net. As a result of placing SPL into administration, we recognized a gain of approximately $2.3 million during the year ended December 31, 2010 within other expense (income), net on the consolidated statement of operations. This gain is primarily related to the reversal of the cumulative translation adjustment account, which had previously been included as a component of other comprehensive income within shareholders’ equity. The gain is partially offset by foreign currency loss during the year ended December 31, 2010 of approximately $1.0 million. For the year ended December 31, 2009, other expense of $0.9 million relates to foreign currency losses incurred during the year.

Income (Loss) Before Income Taxes. Income (loss) before income taxes is summarized in the following table by reportable segment (in thousands):

							Dollar			Percent
							increase /			increase /
Years ended December 31	2010			2009			(decrease)			(decrease)

Electronics (A)	$	9,472		$	(13,911	)	$	23,383			168.1	%
Control Devices (A)		15,626			(5,712	)		21,338			373.6	%
Other corporate activities (A)		6,368			8,079			(1,711	)		(21.2	)%
Corporate interest expense		(20,163	)		(21,782	)		1,619			7.4	%
Income (loss) before income taxes	$	11,303		$	(33,326	)	$	44,629			133.9	%

(A)

Income before income taxes for the year ended December 31, 2010 excludes the impact of placing SPL into administration. As a result of placing SPL into administration, we recognized a gain within the Electronics segment of $32,512 and a loss within the Control Devices segment and other corporate activities of $473 and $32,039, respectively. These gains and losses were primarily the result of eliminating SPL's intercompany debt and equity structure.

The increase in profitability in the Electronics reportable segment was principally related to the increased sales volume, primarily to our commercial and agricultural vehicle customers for the year ended December 31, 2010 when compared to 2009. Production volume increases favorably affected our Electronics segment by $83.7 million during the year ended December 31, 2010 when compared to the prior year. In addition, restructuring related expenses for the Electronics segment were approximately $2.3 million lower for the year ended December 31, 2010 when compared to 2009.

The increase in profitability in the Control Devices reportable segment was primarily due to increased sales volume for the year ended December 31, 2010 when compared to the year ended December 31, 2009. Production volume increases favorably affected our net sales within the Control Devices segment by approximately $55.7 million for the year ended December 31, 2010 when compared to the prior year.

The decrease in profitability from other corporate activities was primarily due to higher employee related costs, largely incentive compensation costs incurred during the year ended December 31, 2010 when compared to 2009.

Income (loss) before income taxes by geographic location are summarized in the following table (in thousands):

										Dollar		Percent
Years ended December 31	2010				2009					increase		increase

North America (A)	$	9,113	80.6	%	$	(16,715	)	50.2	%	$	25,828		154.5	%
Europe and other (A)		2,190	19.4			(16,611	)	49.8			18,801		113.2	%
Income (loss) before income taxes	$	11,303	100.0	%	$	(33,326	)	100.0	%	$	44,629		133.9	%

(A)

Income before income taxes for the year ended December 31, 2010 excludes the impact of placing SPL into administration. As a result of placing SPL into administration, we recognized a gain within Europe and other and a loss within North America of $32,430. These gains and losses were primarily the result of eliminating SPL's intercompany debt and equity structure.

North America income (loss) before income taxes includes interest expense, net of approximately $21.6 million and $22.3 million for the year ended December 31, 2010 and 2009, respectively.

Excluding the effect of the SPL administration, our North American results improved, primarily as a result of increased volume in the North American automotive and commercial vehicle markets during the year ended December 31, 2010 as compared to 2009. Our results in Europe and other were favorably affected by our increased European commercial vehicle market sales during the current period.

Provision (Benefit) for Income Taxes. We recognized a provision (benefit) for income taxes of $0.7 million, or 6.0% of our pre-tax net income, and $(1.0) million, or 3.0% of pre-tax net loss, for federal, state and foreign income taxes for 2010 and 2009, respectively. As of December 31, 2010, the Company continues to be in a cumulative loss position and provides a valuation allowance offsetting federal, state and certain foreign deferred tax assets. The increase in tax expense for the year ended December 31, 2010 compared to the same period for 2009 was primarily attributable to the improved financial performance in most foreign locations including the improved financial performance of our PST joint venture which we are required to provide deferred tax expense on our share of its earnings. The increase in tax expense for the year ended December 31, 2010 was partially offset by a reduction in the U.S. valuation allowance due to the receipt of PST dividends as well as a tax benefit related to our United Kingdom operations. As a result of placing SPL into administration, as described in Note 13, the Company recognized a tax benefit of approximately $1.2 million for United Kingdom jurisdictions during the year ended December 31, 2010, from the reversal of deferred tax liabilities, primarily employee benefit related, that were previously included as a component of accumulated other comprehensive income within shareholders’ equity.

Year Ended December 31, 2009 Compared To Year Ended December 31, 2008

Net Sales. Net sales for our reportable segments, excluding inter-segment sales are summarized in the following table (in thousands):

									Dollar			Percent
Years ended December 31	2009				2008				decrease			decrease

Electronics	$	301,424	63.4	%	$	520,936	69.2	%	$	(219,512	)		(42.1	)%
Control Devices		173,728	36.6			231,762	30.8			(58,034	)		(25.0	)%
Total net sales	$	475,152	100.0	%	$	752,698	100.0	%	$	(277,546	)		(36.9	)%

Our Electronics segment was adversely affected by reduced volume in our served markets by approximately $198.1 million for the year ended December 31, 2009 when compared to the year ended December 31, 2008. The decrease in net sales for our Electronics segment was primarily due to volume declines in our North American and European commercial vehicle production. Commercial vehicle market production volumes in Europe and North America declined by 64.1% and 39.8%, respectively, during the year ended December 31, 2009 compared to the year ended December 31, 2008. The reductions in European and North American commercial vehicle production negatively affected net sales in our Electronics segment for the year ended December 31, 2009 by approximately $65.3 million or 42.3% and $88.7 million or 37.3%, respectively. The balance of the decrease was primarily related to volume declines in the agricultural and automotive vehicle markets of approximately $22.6 million and $21.5 million, respectively. In addition, our Electronics segment net sales were unfavorably affected by foreign currency fluctuations of approximately $15.3 million in 2009 when compared to 2008.

Our Control Devices segment was adversely affected by reduced volume in our served markets by approximately $49.4 million for the year ended December 31, 2009 when compared to the year ended December 31, 2008. The decrease in net sales for our Control Devices segment was primarily attributable to production volume reductions at our major customers in the North American automotive vehicle market. Production volumes in the North American automotive vehicle market declined by 32.3% during the year ended December 31, 2009 when compared to the year ended December 31, 2008. Volume reductions within the automotive market of our Control Devices segment reduced net sales for the year ended December 31, 2009 by approximately $39.4 million, or 20.7%, when compared to the year ended December 31, 2008. In addition, net sales were adversely affected by sales losses during the year ended December 31, 2009 of approximately $10.0 million. These sales losses were primarily a result of our products being decontented or removed from certain customer products. The balance of the decrease was related to volume declines in the agricultural and commercial vehicle markets of approximately $5.6 million and $4.4 million, respectively during the year ended December 31, 2009 when compared to the year ended December 31, 2008.

Net sales by geographic location are summarized in the following table (in thousands):

									Dollar			Percent
Years ended December 31	2009				2008				decrease			decrease

North America	$	384,467	80.9	%	$	557,990	74.1	%	$	(173,523	)		(31.1	)%
Europe and other		90,685	19.1			194,708	25.9			(104,023	)		(53.4	)%
Total net sales	$	475,152	100.0	%	$	752,698	100.0	%	$	(277,546	)		(36.9	)%

The North American geographic location consists of the results of our operations in the United States and Mexico.

The decrease in North American net sales was primarily attributable to lower sales volume in our North American commercial vehicle, automotive and agricultural markets. These lower volume levels had a negative effect on our net sales for the year ended December 31, 2009 of $93.1 million, $41.9 million and $25.8 million for our North American commercial vehicle, automotive vehicle and agricultural markets, respectively. Our decrease in net sales outside North America was primarily due to lower sales volumes in the European commercial and automotive vehicle markets, which had a negative effect on net sales for the year ended December 31, 2009 of approximately $65.4 million and $19.0 million, respectively. In addition, our 2009 net sales outside of North America were negatively affected by foreign currency fluctuations of approximately $15.3 million.

Consolidated statements of operations as a percentage of net sales are presented in the following table (in thousands):

													Dollar
													increase /
Years ended December 31				2009						2008			decrease

Net sales	$	475,152			100.0	%	$	752,698			100.0	%	$	(277,546	)

Costs and Expenses:
Cost of goods sold		387,167			81.5			586,411			77.9			(199,244	)
Selling, general and administrative		106,228			22.4			144,383			19.2			(38,155	)
Goodwill impairment charge		-			-			65,175			8.7			(65,175	)

Operating loss		(18,243	)		(3.9	)		(43,271	)		(5.8	)		25,028

Interest expense, net		21,965			4.6			20,575			2.7			1,390
Equity in earnings of investees		(7,775	)		(1.6	)		(13,490	)		(1.8	)		5,715
Other expense, net		893			0.2			419			0.1			474

Loss before income taxes		(33,326	)		(7.1	)		(50,775	)		(6.8	)		17,449

Provision (benefit) for income taxes		(1,003	)		(0.2	)		46,752			6.2			(47,755	)

Net loss		(32,323	)		(6.9	)		(97,527	)		(13.0	)		65,204

Net income attributable to noncontrolling interest		82			-			-			-			82

Net loss attributable to Stoneridge, Inc. and subsidiaries	$	(32,405	)		(6.9	)%	$	(97,527	)		(13.0	)%	$	65,122

Cost of Goods Sold. The increase in cost of goods sold as a percentage of net sales was due to the significant decline in volume of our European and North American commercial and automotive vehicle markets net sales during 2009. A portion of our cost structure is fixed in nature, such as overhead and depreciation costs. These fixed costs combined with significantly lower net sales increased our cost of goods sold as a percentage of net sales. In addition, our cost of goods sold for 2008 included approximately $7.0 million of restructuring charges. In 2009, there was approximately $0.1 million of restructuring costs included in cost of goods sold. Our material cost as a percentage of net sales for our Electronics segment for 2009 and 2008 was 55.4% and 51.8%, respectively. This increase is primarily due to significantly lower volume from our military related commercial vehicle products during the year ended December 31, 2009. Our materials cost as a percentage of net sales for the Control Devices segment increased from 50.7% for 2008 to 52.9% for 2009. Our material costs as a percent of sales increased during the year ended December 31, 2009 due to the outsourcing of a stamping operation and inventory related charges. As a result of outsourcing the stamping operation, the entire cost of the stamping was included in direct material. Prior to outsourcing the stamping operation, the cost was split between direct labor, direct material and overhead.

Selling, General and Administrative Expenses. Product development expenses included in SG&A were $33.0 million and $45.5 million for 2009 and 2008, respectively. Product development expenses for our Electronics and Control Devices segments decreased from $29.5 million and $16.0 million for 2008 to $19.5 million and $13.5 million for 2009, respectively. The decrease in product development costs for both segments was a result of our customers delaying new product launches as well as planned reductions in our design activities. The decrease in SG&A costs excluding product development expenses was due to lower employee related costs of approximately $17.3 million caused by reduced headcount and lower incentive compensation expenses, company-wide. Cost reductions for the year ended December 31, 2009 benefited from a combination of restructuring initiatives incurred in prior periods and temporary cost control measures, such as wage and benefit freezes and unpaid leaves. Our SG&A costs increased as a percentage of net sales because net sales declined faster than we were able to reduce our SG&A costs.

Costs from our restructuring initiatives for 2009 decreased compared to 2008. Costs incurred during 2009 related to restructuring initiatives amounted to approximately $3.7 million and were primarily comprised of one-time termination benefits. Restructuring related expenses of $3.6 million that were general and administrative in nature were included in our consolidated statements of operations as a component of SG&A, while the remaining $0.1 million of restructuring related expenses was included in cost of goods sold. These restructuring actions were in response to the depressed conditions in the European and North American commercial vehicle markets as well as the North American automotive vehicle market. Restructuring charges for 2008 were approximately $15.4 million and were comprised of one-time termination benefits and line-transfer expenses related to our initiative to improve the Company’s manufacturing efficiency and cost position by ceasing manufacturing operations at our Control Devices segment facility in Sarasota, Florida and our Electronics segment facility in Mitcheldean, United Kingdom. Restructuring related expenses of $8.4 million that were general and administrative in nature were included in our consolidated statements of operations as as a component of SG&A, while the remaining $7.0 million of restructuring related expenses were included in cost of goods sold. These initiatives were substantially completed in 2009.

Restructuring charges, general and administrative in nature, recorded by reportable segment during the year ended December 31, 2009 were as follows (in thousands):

	Electronics		Control Devices		Total consolidated restructuring charges

Severance costs	$	2,237	$	1,034	$	3,271
Contract termination costs		374		-		374
Total general and administrative restructuring charges	$	2,611	$	1,034	$	3,645

Severance costs relate to a reduction in workforce. Contract termination costs represent expenditures associated with long-term lease obligations that were cancelled as part of the restructuring initiatives.

Restructuring charges, general and administrative in nature, recorded by reportable segment during the year ended December 31, 2008 were as follows (in thousands):

	Electronics		Control Devices		Total consolidated restructuring charges

Severance costs	$	2,564	$	2,521	$	5,085
Contract termination costs		1,305		-		1,305
Other exit costs		23		1,978		2,001
Total general and administrative restructuring charges	$	3,892	$	4,499	$	8,391

Other exit costs include miscellaneous expenditures associated with exiting business activities, such as the transferring of production equipment.

Goodwill Impairment Charge. A goodwill impairment charge of $65.2 million was recorded during 2008. During the fourth quarter of 2008, as a result of the deterioration of the global economy and its effects on the automotive and commercial vehicle markets, we recognized the goodwill impairment charge within our Control Devices reportable segment. There were no similar impairment charges taken in 2009.

Equity in Earnings of Investees. The decrease in equity earnings of investees was predominately attributable to the decrease in equity earnings recognized from our PST joint venture. Equity earnings for PST declined from $12.8 million for the year ended December 31, 2008 to $7.4 million for the year ended December 31, 2009. The decrease was caused by a 19.3% decline in PST’s net sales.

Income (Loss) Before Income Taxes. Income (loss) before income taxes is summarized in the following table by reportable segment (in thousands):

							Dollar increase /			Percent increase /
Years ended December 31	2009			2008			(decrease)			(decrease)

Electronics	$	(13,911	)	$	38,713		$	(52,624	)		(135.9	)%
Control Devices		(5,712	)		(78,858	)		73,146			92.8	%
Other corporate activities		8,079			10,078			(1,999	)		(19.8	)%
Corporate interest expense, net		(21,782	)		(20,708	)		(1,074	)		(5.2	)%
Loss before income taxes	$	(33,326	)	$	(50,775	)	$	17,449			34.4	%

The decrease in our profitability in the Electronics reportable segment was primarily related to the significant decline in net sales, primarily related to volume declines in 2009 when compared to 2008. Volume reductions reduced our net sales within the Electronics segment by approximately $198.1 million for the year ended December 31, 2009 when compared to the year ended December 31, 2008.

The decrease in loss before income taxes in the Control Devices reportable segment was primarily due to the goodwill impairment charge of $65.2 million recognized in 2008. Additionally, the Control Devices segment recognized an additional $7.8 million of restructuring related expenses in 2008 as compared to 2009. Volume reductions reduced our net sales within the Control Devices segment by approximately $49.4 million for the year ended December 31, 2009 when compared to the year ended December 31, 2008.

The increase in corporate interest expense, net from 2008 to 2009 was a result of a lower amount of interest income realized during the year ended December 31, 2009 to offset our interest expense. The decreased interest income is attributable to lower yields on investments during 2009 when compared to 2008.

The decrease in income before income taxes from other corporate activities was primarily due to a decrease in equity earnings from our PST joint venture of $5.4 million in 2009 when compared to 2008. This was partially offset by reduced compensation and compensation related costs recognized during 2009 when compared to 2008, due to cost reduction initiatives. Compensation and compensation related costs were approximately $1.7 million lower in 2009 than they were in 2008.

Loss before income taxes by geographic location are summarized in the following table (in thousands):

											Dollar increase /			Percent
Years ended December 31	2009					2008					(decrease)			increase

North America	$	(16,715	)	50.2	%	$	(47,795	)	94.1	%	$	31,080			65.0	%
Europe and other		(16,611	)	49.8			(2,980	)	5.9			(13,631	)	NM
Loss before income taxes	$	(33,326	)	100.0	%	$	(50,775	)	100.0	%	$	17,449			34.4	%

NM - not meaningful

North American loss before income taxes includes interest expense, net of approximately $22.3 million and $21.4 million for the year ended December 31, 2009 and 2008, respectively.

Our North American 2008 profitability was adversely affected by the $65.2 million goodwill impairment charge. Excluding the goodwill impairment charge, the decrease in our profitability in North America was primarily attributable to lower commercial and automotive vehicle sales volumes during the year ended December 31, 2009 of approximately $93.1 million and $41.9 million, respectively, when compared to 2008. The decrease in profitability outside North America was primarily due to lower sales volumes within our European commercial vehicle market of approximately $65.4 million for the year ended December 31, 2009, as compared to the year ended December 31, 2008.

Provision (Benefit) for Income Taxes. We recognized a provision (benefit) for income taxes of $(1.0) million, or 3.0% and $46.8 million, or (92.1) % of our pre-tax net loss, for federal, state and foreign income taxes for 2009 and 2008, respectively. The effective tax rate for 2009 decreased compared to 2008 primarily as a result of the difference in the amount of valuation allowance recorded against our domestic deferred tax assets. Prior to 2008 the Company had not provided a valuation allowance against its domestic deferred tax assets, therefore the amount of valuation allowance provided in 2008 was based on the total domestic deferred tax asset amount. The amount of valuation allowance provided in 2009 is significantly less than 2008 as it relates only to the change in domestic deferred tax assets from 2008 to 2009. Due to the impairment of goodwill in 2008, the Company was in a cumulative loss position for the period 2007-2009 and has provided a valuation allowance offsetting federal, state and certain foreign net deferred tax assets. Additionally, the 2008 effective tax rate was negatively affected by non-deductible goodwill.

Liquidity and Capital Resources

Summary of Cash Flows for the years ended December 31, 2010 and 2009 (in thousands):

							Dollar
							increase /
	2010			2009			(decrease)

Net cash provided by (used for):
Operating activities	$	13,851		$	13,824		$	27
Investing activities		(18,518	)		(17,764	)		(754	)
Financing activities		(14,029	)		336			(14,365	)
Effect of exchange rate changes on cash and cash equivalents		(1,237	)		2,819			(4,056	)
Net change in cash and cash equivalents	$	(19,933	)	$	(785	)	$	(19,148	)

Cash provided by operating activities for 2010 was consistent with 2009. Our cash provided by operating activities for the year ended December 31, 2010 was positively affected by higher net income and accounts payable balances. This was partially offset by higher accounts receivable and inventory balances. Our higher working capital account balances at December 31, 2010 were attributable to the higher sales volume in the current period. Our receivable terms and collections rates have remained consistent between periods presented. As our served markets improve we expect that our working capital requirements will continue to increase accordingly.

The increase in net cash used for investing activities reflects an increase in cash used for capital projects of approximately $6.6 million. Our 2009 capital expenditures were historically lower than normal as a result of our customers delaying product launches. As our served markets continue to improve we expect our future capital expenditures to increase and be more consistent with our historical expenditures. Also, during 2009, we acquired 51% ownership interest in Bolton Conductive Systems, LLC (“BCS”) at a cost of approximately $6.0 million.

During the year ended December 31, 2010, we issued $175.0 million senior secured notes with a fixed interest rate of 9.5%. These senior secured notes were issued at a 2.5% discount to the initial purchasers, which resulted in net proceeds of $170.6 million from the issuance. We used the proceeds from this issuance and cash-on-hand to extinguish our $183.0 million, 11.5% senior notes. We refinanced this long-term liability in order to extend its maturity to October 15, 2017 and to reduce the interest rate on the debt. In conjunction with the senior secured notes issuance, we incurred $1.4 million of costs, which were capitalized as deferred financing costs at December 31, 2010. As a result of the refinancing, we expect to reduce our annual cash interest by approximately $4.4 million. Also, during 2010, our wholly-owned subsidiary located in Suzhou, China (“Suzhou”) entered into a term loan of 4,690 Chinese yuan which was approximately $0.7 million at December 31, 2010.

Summary of Cash Flows for the years ended December 31, 2009 and 2008 (in thousands):

							Dollar
							increase /
	2009			2008			(decrease)

Cash provided by (used for):
Operating activities	$	13,824		$	42,456		$	(28,632	)
Investing activities		(17,764	)		(23,901	)		6,137
Financing activities		336			(16,231	)		16,567
Effect of exchange rate changes on cash and cash equivalents		2,819			(5,556	)		8,375
Net change in cash and cash equivalents	$	(785	)	$	(3,232	)	$	2,447

The decrease in net cash provided by operating activities was primarily due to lower earnings, partially offset by lower inventory balances as of December 31, 2009 when compared to December 31, 2008. In particular, we reduced inventories in 2009 because of lower production requirements and the reduction of inventory safety stock resulting from the transfer of production from our Sarasota, Florida and Mitcheldean, United Kingdom facilities to other Stoneridge facilities during the last six months of 2008.

The decrease in net cash used for investing activities reflects a decrease in cash used for capital projects of approximately $12.6 million offset by an increase in business acquisitions of $5.0 million in 2009. We acquired a 51% membership interest in BCS during 2009. Capital expenditures were lower for the year ended December 31, 2009 when compared to 2008 due to our customers delaying new product launches. We believe that our capital expenditures will increase as the markets that we serve continue to recover.

The decrease in net cash used by financing activities was primarily due to cash used to purchase and retire $17.0 million in face value of the Company’s senior notes during 2008. There was no similar activity during 2009.

The following table summarizes our future cash outflows resulting from financial contracts and commitments, as of December 31, 2010 (in thousands):

	Total		Less than 1 year		2-3 years		4-5 years		After 5 years

Debt	$	176,138	$	946	$	192	$	-	$	175,000
Operating leases		24,064		6,018		9,863		5,294		2,889
Total contractual obligations	$	200,202	$	6,964	$	10,055	$	5,294	$	177,889

Management will continue to focus on reducing its weighted average cost of capital and believes that cash flows from operations and the availability of funds from our credit facility will provide sufficient liquidity to meet our future growth and operating needs.

On October 4, 2010, we issued $175.0 million of senior secured notes. These senior secured notes bear interest at an annual rate of 9.5% and mature on October 15, 2017. The senior secured notes were issued at a 2.5% discount to the initial purchasers. We will accrete this discount using the effective interest method over the life of the senior secured notes. The senior secured notes are redeemable, at our option, beginning October 15, 2014 at 104.75%. Interest payments commence on April 15, 2011 and are payable on April 15 and October 15 of each year, thereafter. The senior secured notes indenture limits our and our restricted subsidiaries amount of indebtedness, restricts certain payments and includes various other non-financial restrictive covenants. The senior secured notes are guaranteed by all of our existing domestic restricted subsidiaries. All other restricted subsidiaries that guarantee any of our or our guarantors’ indebtedness will also guarantee the senior secured notes.

On October 4, 2010, we entered into a fixed-to-variable interest rate swap agreement (the “Swap”) with a notional amount of $45.0 million. The Swap was designated as a fair value hedge of the fixed interest rate obligation under our $175.0 million 9.5% senior secured notes due October 15, 2017. We pay variable interest equal to the six-month LIBOR plus 7.19% and we receive a fixed interest rate of 9.5% under the Swap. The critical terms of the Swap match the terms of the senior secured notes, including maturity of October 15, 2017, resulting in no hedge ineffectiveness.

As outlined in Note 6 to our consolidated financial statements, our credit facility permits borrowing up to a maximum level of $100.0 million. At December 31, 2010, there were no borrowings on the credit facility. The available borrowing capacity on the credit facility is based on eligible current assets, as defined. At December 31, 2010, we had a borrowing capacity of $61.3 million based on eligible current assets. The credit facility does not contain financial performance covenants which would constrain our borrowing capacity. However, restrictions do include limits on capital expenditures, operating leases, dividends and investment activities in a negative covenant which limits investment activities to $15.0 million minus certain guarantees and obligations. We were in compliance with all covenants at December 31, 2010. In connection with the senior secured notes issuance, we entered into an Amended and Restated Credit and Security Agreement on September 20, 2010. The Amended and Restated Credit and Security Agreement which became effective on October 4, 2010 (i) provided certain consents necessary for the issuance of the senior secured notes, (ii) extended the expiration date of the credit facility to November 1, 2012 and (iii) granted the facility agent, for the benefit of the lenders, second priority liens and security interests in the collateral subject to first priority liens and security interests in favor of the collateral agent for the holders of the senior secured notes.

The BCS master revolving note (the “Revolver”) permits borrowing up to a maximum level of $3.0 million. On September 29, 2010, BCS amended the Revolver to extend the maturity date to September 29, 2011 and reduced the interest rate to the prime referenced rate plus a margin of 2.0%, which is payable quarterly. The available borrowing capacity on the Revolver is based on an advanced formula, as defined. At December 31, 2010, BCS has borrowing capacity of $1.1 million based on the advanced formula. At December 31, 2010, BCS had approximately $0.7 million in borrowings outstanding on the Revolver, which is included on the consolidated balance sheet as a component of accrued expenses and other current liabilities. At December 31, 2010 the interest rate on the Revolver was 5.25%. The Company is a guarantor as it relates to the Revolver. The Revolver contains certain financial restrictive covenants. BCS violated the fixed charge and tangible net worth covenants related to the Revolver on December 31, 2010. Subsequent to year-end, BCS received a waiver for covenant violations occurring between December 31, 2010 and February 28, 2011.

The Suzhou term loan is in the amount of 4,690 Chinese yuan, which was approximately $0.7 million at December 31, 2010 and is included on the consolidated balance sheet as a component of accrued expenses and other current liabilities. The term loan matures on August 5, 2011. Interest is payable monthly at the one-year lending rate published by The People’s Bank of China multiplied by 110.0%. At December 31, 2010, the interest rate on the term loan was 6.39%.

As part of our 2009 acquisition of BCS, we may be required to make additional payments to the previous owners of BCS for our 51% membership interest based on BCS achieving financial performance targets as defined by the purchase agreement. The maximum amount of additional payments to the prior owners of BCS is $3.2 million per year in 2012 and 2013 and are contingent upon BCS achieving profitability targets based on earnings before interest, income taxes, depreciation and amortization in each of the years 2011 and 2012. In addition, we may be required to make additional payments to BCS of approximately $0.5 million in 2012 based on BCS achieving annual revenue targets in 2011. We recorded $0.4 million, which represents the fair value of the estimated future additional payments to the prior owners of BCS as of December 31, 2010 on the consolidated balance sheet as a component of other long-term liabilities. The purchase agreement provides us with the option to purchase the remaining 49% interest in BCS in 2013 at a price determined in accordance with the purchase agreement. If we do not exercise this option the minority owners of BCS have the option in 2014 to purchase our 51% interest in BCS at a price determined in accordance with the purchase agreement or to jointly market BCS for sale.

We have significant U.S. federal income tax net operating loss carryforwards and research credit carryforwards. The Internal Revenue Code of 1986, as amended, imposes an annual limitation on the ability of a corporation that undergoes an “ownership change” to use its net operating loss and credit carryforwards to reduce its tax liability. During the fourth quarter of 2010 we undertook a secondary offering. As a result of the secondary offering a substantial change in our ownership occurred and we may have experienced an ownership change pursuant to Section 382 of the Internal Revenue Code of 1986, as revised. We are in the process of evaluating the secondary offering and the potential impact, if any, on our ability to fully utilize net operating loss and research credit carry forwards. If it is ultimately determined that we did experience an ownership change, there would not be an impact to the balance sheet and statement of operations as of December 31, 2010 due to us being in a valuation allowance position.

At December 31, 2010, we had a cash and cash equivalents balance of approximately $72.0 million, of which $37.8 million was held domestically and $34.2 million was held in foreign locations. None of our cash balance was restricted at December 31, 2010.

Inflation and International Presence

Given the current economic climate and recent fluctuations in certain commodity prices, we believe that an increase in such items could significantly affect our profitability. Furthermore, by operating internationally, we are affected by foreign currency exchange rates and the economic conditions of certain countries.

Critical Accounting Policies and Estimates

Estimates. The preparation of financial statements in conformity with U.S. Generally Accepted Accounting Principles (“GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent liabilities at the date of the consolidated financial statements, and the reported amounts of revenues and expenses during the reporting period.

On an ongoing basis, we evaluate estimates and assumptions used in our financial statements. We base our estimates on historical experience and on various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results could differ from these estimates.

We believe the following are “critical accounting policies” – those most important to the financial presentation and those that require the most difficult, subjective or complex judgments.

Revenue Recognition and Sales Commitments. We recognize revenues from the sale of products, net of actual and estimated returns of products sold based on authorized returns, at the point of passage of title, which is generally at the time of shipment. We often enter into agreements with our customers at the beginning of a given vehicle’s expected production life. Once such agreements are entered into, it is our obligation to fulfill the customers’ purchasing requirements for the entire production life of the vehicle. These agreements are subject to renegotiation, which may affect product pricing. In certain limited instances, we may be committed under existing agreements to supply products to our customers at selling prices which are not sufficient to cover the direct cost to produce such products. In such situations, we recognize losses immediately. There were no such significant instances of this in 2010. These agreements generally may also be terminated by our customers at any time.

On an ongoing basis, we receive blanket purchase orders from our customers, which include pricing terms. Purchase orders do not always specify quantities. We recognize revenue based on the pricing terms included in our purchase orders as our products are shipped to our customers. We are asked to provide our customers with annual cost reductions as part of certain agreements. In addition, we have ongoing adjustments to our pricing arrangements with our customers based on the related content, the cost of our products and other commercial factors. Such pricing adjustments are recognized as they are negotiated with our customers.

Warranties. Our warranty reserve is established based on our best estimate of the amounts necessary to settle future and existing claims on products sold as of the balance sheet dates. This estimate is based on historical trends of units sold and payment amounts, combined with our current understanding of the status of existing claims. To estimate the warranty reserve, we are required to forecast the resolution of existing claims as well as expected future claims on products previously sold. Although we believe that our warranty reserve is adequate and that the judgment applied is appropriate, such amounts estimated to be due and payable could differ materially from what will actually transpire in the future. Our customers are increasingly seeking to hold suppliers responsible for product warranties, which could negatively impact our exposure to these costs.

Allowance for Doubtful Accounts. We have concentrations of sales and trade receivable balances with a few key customers. Therefore, it is critical that we evaluate the collectability of accounts receivable based on a combination of factors. In circumstances where we are aware of a specific customer’s inability to meet their financial obligations, a specific allowance for doubtful accounts is recorded against amounts due to reduce the net recognized receivable to the amount we reasonably believe will be collected. Additionally, we review historical trends for collectability in determining an estimate for our allowance for doubtful accounts. If economic circumstances change substantially, estimates of the recoverability of amounts due to the Company could be reduced by a material amount. We do not have collateral requirements with our customers.

Contingencies. We are subject to legal proceedings and claims, including product liability claims, commercial or contractual disputes, environmental enforcement actions and other claims that arise in the normal course of business. We routinely assess the likelihood of any adverse judgments or outcomes to these matters, as well as ranges of probable losses, by consulting with internal personnel principally involved with such matters and with our outside legal counsel handling such matters.

We have accrued for estimated losses when it is probable that a liability or loss has been incurred and the amount can be reasonably estimated. Contingencies by their nature relate to uncertainties that require the exercise of judgment both in assessing whether or not a liability or loss has been incurred and estimating that amount of probable loss. The reserves may change in the future due to new developments or changes in circumstances. The inherent uncertainty related to the outcome of these matters can result in amounts materially different from any provisions made with respect to their resolution.

Inventory Valuation. Inventories are valued at the lower of cost or market. Cost is determined by the last-in, first-out method for U.S. inventories and by the first-in, first-out method for non-U.S. inventories. Where appropriate, standard cost systems are utilized for purposes of determining cost and the standards are adjusted as necessary to ensure they approximate actual costs. Estimates of the lower of cost or market value of inventory are determined based upon current economic conditions, historical sales quantities and patterns and, in some cases, the specific risk of loss on specifically identified inventories. We adjust our excess and obsolescence reserve at least on a quarterly basis. Excess inventories are quantities of items that exceed anticipated sales or usage for a reasonable period. We have guidelines for calculating provisions for excess inventories based on the number of months of inventories on hand compared to anticipated sales or usage.

Goodwill. Goodwill is tested for impairment at least annually and whenever events or changes in circumstances indicate that the carrying value may not be recoverable. The valuation methodologies employed by the Company use subjective measures including forward looking financial information and discount rates that directly impact the resulting fair values used to test the Company’s business units for impairment. See Note 2 to our consolidated financial statements for more information on our application of this accounting standard, including the valuation techniques used to determine the fair value of goodwill.

Share-Based Compensation. The estimate for our share-based compensation expense involves a number of assumptions. We believe each assumption used in the valuation is reasonable because it takes into account the experience of the plan and reasonable expectations. We estimate volatility and forfeitures based on historical data, future expectations and the expected term of the share-based compensation awards. The assumptions, however, involve inherent uncertainties. As a result, if other assumptions had been used, share-based compensation expense could have varied.

Deferred Income Taxes. Deferred income taxes are provided for temporary differences between amounts of assets and liabilities for financial reporting purposes and the basis of such assets and liabilities as measured by tax laws and regulations. Our deferred tax assets include, among other items, net operating loss carryforwards and tax credits that can be used to offset taxable income in future periods and reduce income taxes payable in those future periods. These deferred tax assets will begin to expire, if unused, no later than 2025 and 2021, respectively.

Statement of Financial Accounting Standard (“SFAS”) No. 109, Accounting for Income Taxes (Accounting Standards Codification TM (“ASC”) Topic 740), requires that deferred tax assets be reduced by a valuation allowance if, based on all available evidence, it is considered more likely than not that some portion or all of the recorded deferred tax assets will not be realized in future periods. This assessment requires significant judgment, and in making this evaluation, the Company considers available positive and negative evidence, including past results, the existence of cumulative losses in recent periods, our forecast of taxable income for the current year and future years and tax planning strategies.

During the fourth quarter of 2008, the Company concluded that it was no longer more-likely-than-not that we would realize our U.S. deferred tax assets. As a result we provided a full valuation allowance, net of certain future reversing taxable temporary differences, with respect to our U.S. deferred tax assets. This conclusion did not change for 2009 and 2010. To the extent that realization of a portion or all of the tax assets becomes more-likely-than-not to be realized based on changes in circumstances a reversal of that portion of the deferred tax asset valuation allowance will be recorded.

The Company does not provide deferred income taxes on unremitted earnings of certain non-U.S. subsidiaries, which are deemed permanently reinvested.

Restructuring. We have recorded restructuring charges in prior periods in connection with improving manufacturing efficiency and cost position by transferring production to other locations. These charges are recorded when management has committed to a plan and incurred a liability related to the plan. Also in connection with this initiative, we recorded liabilities for severance costs. No fixed-asset impairment charges were incurred because assets are primarily being transferred to our other locations for continued production. Estimates for work force reductions and other costs savings are recorded based upon estimates of the number of positions to be terminated, termination benefits to be provided and other information as necessary. Management evaluates the estimates on a quarterly basis and will adjust the reserve when information indicates that the estimate is above or below the initial estimate. For fur