UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

xAnnual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the fiscal year ended October 31, 2014 or

 

¨Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the transition period from _________ to _________.

 

Commission File No. 0-9143

 

HURCO COMPANIES, INC.

(Exact name of registrant as specified in its charter)

 

Indiana 35-1150732
(State or other jurisdiction of (I.R.S. Employer Identification Number)
incorporation or organization)  
   
One Technology Way  
Indianapolis, Indiana 46268
(Address of principal executive offices) (Zip code)

 

 

Registrant’s telephone number, including area code (317) 293-5309

 

Securities registered pursuant to Section 12(b) of the Act: None
   
Securities registered pursuant to Section 12(g) of the Act: Common Stock, No Par Value
  (Title of Class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. 

Yes ¨    No x

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d).   

Yes ¨    No x

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to the filing requirements for the past 90 days.   

Yes x    No ¨

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   

Yes x    No ¨

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.   ¨

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ¨   Accelerated filer x   Non-accelerated filer ¨  Smaller reporting company ¨
    (Do not check if a smaller reporting company)  

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).   

Yes ¨    No x

 

The aggregate market value of the registrant’s voting stock held by non-affiliates as of April 30, 2014 (the last day of our most recently completed second quarter) was $173,420,000.

 

The number of shares of the registrant’s common stock outstanding as of December 31, 2014 was 6,522,886.

 

DOCUMENTS INCORPORATED BY REFERENCE: Portions of the registrant’s Proxy Statement for its 2015 Annual Meeting of Shareholders (Part III).

 

 
 

 

Forward-looking Statements

 

This report contains certain statements that are forward-looking statements within the meaning of federal securities laws. Forward-looking statements can be identified by the fact that they do not relate strictly to historical or current facts. When used in this report, the words “may”, “will”, “should”, “would” ,“could”, “anticipate”, “expect”, “plan”, “seek”, “believe”, “predict”, “estimate”, “potential”, “project”, “target”, “forecast”, “intend”, “strategy”, “future”, “opportunity”, “assume”, “guide”, and similar expressions are intended to identify forward-looking statements. Forward-looking statements are based on current expectations and assumptions that are subject to risks and uncertainties that could cause actual results to differ materially from such forward-looking statements. These risks and uncertainties include, but are not limited to, the risks and other important factors under the heading “Risk Factors” in Part I, Item 1A of this report. You should understand that it is not possible to predict or identify all factors that could cause actual results to differ materially from forward-looking statements. Consequently, you should not consider any list or discussion of such factors to be a complete set of all potential risks or uncertainties. Readers of this report are cautioned not to place undue reliance on these forward-looking statements. While we believe the assumptions on which the forward-looking statements are based are reasonable, there can be no assurance that these forward-looking statements will prove to be accurate. This cautionary statement is applicable to all forward-looking statements contained in this report. We expressly disclaim any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. You are advised, however, to consult any further disclosures we make on related subjects in our Form 10-Q, 8-K and 10-K reports and our other filings with the Securities and Exchange Commission (SEC).

 

PART I

 

Item 1.        BUSINESS

 

General

 

Hurco Companies, Inc. is an industrial technology company.  We design, manufacture and sell computerized machine tools, consisting primarily of vertical machining centers (mills) and turning centers (lathes), to companies in the metal working industry through a worldwide sales, service and distribution network.  Although our computer control systems and software products are proprietary, they predominantly use industry standard personal computer components.  Our computer control systems and software products are primarily sold as integral components of our computerized machine tool products.  As used in this report, the words “we”, “us”, “our”, “Hurco” and the “Company” refer to Hurco Companies, Inc. and its consolidated subsidiaries.

 

Since our founding in 1968, we have been a leader in the introduction of interactive computer control systems that automate manufacturing processes and improve productivity in the metal parts manufacturing industry. We pioneered the application of microprocessor technology and conversational programming software for use in machine tools.  Our computer control systems can be operated by both skilled and unskilled machine tool operators and yet are capable of instructing a machine to perform complex tasks.  The combination of microprocessor technology and patented interactive, conversational programming software in our computer control systems enables operators on the production floor to quickly and easily create a program for machining a particular part from a blueprint or computer aided design file and immediately begin machining that part.

 

Our executive offices and principal design and engineering operations are headquartered in Indianapolis, Indiana, USA.  Sales, application engineering and service subsidiaries are located in China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom, and the USA. We have manufacturing operations in Taiwan, the USA, Italy and China, and distribution facilities in the USA, the Netherlands, and Taiwan. During the third quarter of fiscal 2013, we acquired the machine tools components business of an Italian designer and manufacturer of electro-mechanical components and accessories for machine tools. We are operating this business through our wholly-owned subsidiary, LCM Precision Technology S.r.l. (LCM). This acquisition supports our mission to develop advanced machine tool technologies to support our customers, that need increasingly sophisticated and versatile CNC (“Computer Numerical Control”) machine tools to stay competitive and to grow profitability.

 

Our strategy is to design, manufacture and sell a comprehensive line of computerized machine tools that incorporate our proprietary, interactive, computer control technology for the global metal cutting market.  Our technology is designed to enhance the machine tool user's productivity through ease of operation and higher levels of machine performance (speed, accuracy and surface finish quality).  We use an open system software architecture that permits our computer control systems and software to be produced and employed using standard PC hardware. We have emphasized a “user-friendly” design that employs both interactive conversational and graphical programming software. We routinely expand our product offering to meet customer needs, which has led us to design and manufacture more complex machining centers with advanced capabilities.  We bring a disciplined approach to strategically enter new geographic markets, as appropriate.  

 

1
 

 

Industry

 

Machine tool products are considered capital goods, which makes them part of an industry that has historically been highly cyclical. 

 

Although industry association data for the U.S. machine tool market is available, that market only accounts for approximately 16% of worldwide consumption.  Reports available for the U.S. machine tool market include:

 

·United States Machine Tool Consumption – generated by the Association for Manufacturing Technology, this report includes metal cutting machines of all types and sizes, including segments in which we do not compete
·Purchasing Manager’s Index - developed by the Institute for Supply Management, this report includes activity levels in U.S. manufacturing plants that purchase machine tools 
·Capacity Utilization of Manufacturing Companies – issued by the Federal Reserve Board

 

A limited amount of information is available for foreign markets, and different reporting methodologies are used by various countries.  Machine tool consumption data published by Gardner Publications, Inc., calculates machine tool consumption annually by country.  It is important to note that data for foreign countries are based on government reports that may lag 6 to 12 months and therefore are unreliable for forecasting purposes. 

 

Demand for capital equipment can fluctuate significantly during periods of changing economic conditions.  Manufacturers and suppliers of capital goods, such as our company, are often the first to experience these changes in demand. Additionally, since our typical order backlog is approximately 45 days, it is difficult to estimate demand with any reasonable certainty. Therefore, we do not have the benefit of relying on the common leading indicators other industries use for market analysis and forecasting purposes.

 

Products

 

Our core products consist of general purpose computerized machine tools for the metal cutting industry. These are, principally, vertical machining centers (mills) and turning centers (lathes), with which our proprietary software and computer control systems are fully integrated. Additionally, we produce and distribute software options, control upgrades, hardware accessories, and replacement parts for our machine tool product lines, and we provide operator training and support services to our customers. We also produce computer control systems and related software for press brake applications that are sold as retrofit units for installation on existing or new press brake machines. Through LCM, we now produce CNC rotary and tilting tables, swivel heads and electro-spindles.

 

2
 

 

The following table sets forth the contribution of each of our product groups and services to our total revenues during each of the past three fiscal years:

 

Net Sales and Service Fees by Product Category

(Dollars in thousands)

 

   Year Ended October 31, 
   2014   2013   2012 
Computerized Machine Tools**  $193,937    87%  $166,896    87%  $179,337    88%
Computer Control Systems and Software *   3,407    2%   3,066    2%   2,947    1%
Service Parts   17,391    8%   16,474    8%   15,299    8%
Service Fees   7,568    3%   6,368    3%   5,534    3%
Total  $222,303    100%  $192,804    100%  $203,117    100%

 

* Amounts shown do not include computer control systems sold as integrated components of computerized machine tools.

** Amounts shown include sales of LCM electro-mechanical components to third parties since the date of acquisition on July 1, 2013.

 

Computerized Machine Tools – Machining and Turning Centers

 

We design, manufacture and sell computerized machine tools equipped with a fully integrated interactive computer control system that features our proprietary WinMax® software. Our computer control system enables a machine tool operator to create complex two-dimensional or three-dimensional machining programs directly from an engineering drawing or computer aided design geometry file. An operator with little or no machine tool programming experience can successfully create a program with minimal training and begin machining the part in a short period of time.  The control features an operator console with a liquid crystal display (LCD), and incorporates an upgradeable personal computer (PC) platform using a high speed processor with solid rendering graphical programming.  In addition, WinMax® has a Windows®* based operating system that enables users to improve shop floor flexibility and software productivity.

 

Companies using computer controlled machine tools are better able to:

  maximize the efficiency of their human resources;
  make more advanced and complex parts from a wide range of materials using multiple processes;
  incorporate fast moving changes in technology into their operations to keep their competitive edge; and
  integrate their business into the global supply chain of their customers by supporting small to medium lot sizes for “just in time” initiatives.

 

Our Windows®* based control facilitates our ability to meet these customer needs. The familiar Windows®* operating system coupled with our intuitive conversational style of program creation allows our customers’ operators to create and edit part-making programs without incurring the incremental overhead of specialized computer aided design and computer aided manufacturing programmers. With the ability to transfer most computer aided design data directly into a Hurco program, programming time can be significantly reduced.

 

Machine tool products today are being designed to meet the demand for machining complex parts with greater part accuracies.  Our proprietary controls with WinMax® software and high speed processors efficiently handle the large amounts of data these complex part-making programs require, which enables our customers to create parts with higher accuracy at faster speeds. We continue to add technology to our control design as it becomes available. For example, UltiMotion, our patented motion control system, provides significant cycle time reductions and increases the quality of a part’s surface finish. This technology differentiates us in the marketplace and is incorporated into our control.

 

 

*Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

 

3
 

 

Our offering of machining centers, currently equipped with either a twin touch-screen console or a single touch-screen console, consists of the following nine product lines:

 

VM Product Line

 

The VM product line consists of moderately priced vertical machining centers for the entry-level market. Their design premise of a machining center with a large work cube and a small footprint optimizes the use of available floor space. The VM line consists of five models in four sizes with X-axis (horizontal) travels of 18, 26, 40, and 50 inches.

 

VMX Product Line

 

The VMX product line consists of higher performing vertical machining centers aimed at manufacturers that require greater part accuracy. It is our flagship series of machining centers. The VMX line consists of 20 models in seven sizes with X-axis travels of 24, 30, 42, 50, 60, 64, and 84 inches.

 

Five-Axis Product Line

 

The five-axis product line is targeted at manufacturers seeking to produce complex multi-sided parts in a single setup. Machines in this product line can yield significant productivity gains for manufacturers that previously had to process each side of a part separately.   With the addition of the VMX30UHSi, VMX42HSRTi, DCX325Si, and VCX600i this year, the five-axis product line now consists of 13 models in five sizes.

 

HS High Speed Machining Product Line

 

Due to the integral, motorized spindle with a base speed of 18,000 rpm, the HS product line is desirable for the die and mold industry with particular interest in improving surface finish quality and reducing cycle time. Additionally, this product line offers us the opportunity to expand our customer base to manufacturers that produce larger batches. The HS product line consists of two models with X-axis travels of 24 and 42 inches.

 

HMX Horizontal Product Line

 

The HMX product line is beneficial to manufacturers entering production manufacturing versus small batch manufacturing. The HMX machines have expanded tool capacity, a comprehensive chip management system, a built-in pallet changer, and a box-in-box design supported at both the top and bottom to increase rigidity for long production runs and heavy cuts. The HMX product line consists of four models in three sizes with X-axis travels of 24, 32, and 41 inches.

 

HBMX Boring Mill Product Line

 

The HBMX product line is beneficial to manufacturers that build custom machinery and parts for a multitude of industries, such as packaging, pharmaceutical, automotive, energy, and medical. Additionally, boring mills are also used to repair and/or rebuild large components. The HBMX boring mill product line consists of three models with X-axis travels of 55, 79, and 94 inches.

 

TM/TMM Product Line

 

Since its introduction in fiscal 2005, we have continued to expand the TM turning center (horizontal slant-bed lathe) product line. The TM series is designed for entry-level job shops and contract manufacturers seeking efficient processing of small to medium lot sizes. There is one TM model in seven sizes: the TM6, TM8, TM10, TM12, TM18, TM18L, and TM18BB, which was introduced this year. The TM18BB big bore turning center targets the energy and aerospace industries because it has a larger chuck diameter and bigger bar capacity for larger parts. We added motorized tooling on the lathe turret to further enhance the capability of the TM turning centers and designated it as the TMM product line. These turning centers with live tooling allow our customers to complete a number of secondary milling, drilling and tapping operations while the part is still held in the chuck after the turning operations are complete, which provides significant productivity gains. The addition of the TMM12 this year expands the TMM product line to three models.

 

4
 

 

TMX Product Line

 

The TMX product line consists of high performance turning centers.   There are three models in two sizes. One of the models is equipped with an additional axis and motorized live tooling, and another one of the models has an additional spindle.

 

DCX Product Line

 

The double column DCX series includes five models in three sizes. These 2-meter, 3-meter, and 4-meter machining centers are designed to facilitate production of large parts and molds often required by the aerospace, energy and custom machinery industries.

 

Computer Control Systems and Software

 

The following machine tool computer control systems and software products are sold directly to end-users and/or to original equipment manufacturers.

 

Autobend®

 

Autobend® computer control systems are applied to metal bending press brake machines that form parts from sheet metal and steel plate.  They consist of a microprocessor-based computer control and back gauge (an automated gauging system that determines where the bend will be made).  We have manufactured and sold the Autobend® product line since 1968.  We currently market two models of our Autobend® computer control systems for press brake machines, in combination with six different back gauges as retrofit units for installation on existing or new press brake machines.

 

Software Products

 

In addition to our standard computer control features, we offer software option products for two-dimensional programming.  These products are sold to users of our computerized machine tools equipped with our twin touch-screen or single touch-screen consoles featuring WinMax® control software.  The options include: Swept Surface, SelectSurface Finish Quality (SFQ), DXF Transfer, UltiMonitor, UltiPocket, Conversational Part and Tool Probing, Advanced Verification Graphics, the Tool and Material Library, NC/Conversational Merge, Job List, Thread Repair, and Simultaneous Five-Axis Contouring.

 

Our Swept Surface software option simplifies programming of 3D contours and significantly reduces programming time.

 

SelectSurface Finish Quality (SFQ) lets the customer control surface finish quality and run time in one easy step.

 

The DXF Transfer software option increases operator productivity because it eliminates manual data entry of part features by transferring AutoCAD®* drawing files directly into our computer control or into our desktop programming software, WinMax® Desktop.

 

UltiMonitor is a web-based productivity, management and service tool, enabling customers to monitor, inspect and receive notifications about their Hurco machines from any location where they can access the internet. Customers can transfer part designs, receive event notifications via email or text, access diagnostic data, monitor the machine via webcam and communicate with the machine operator.

 

 

* AutoCAD® is a registered trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.

 

5
 

 

UltiPocket automatically calculates the tool path around islands, eliminating the arduous task of plotting these shapes.  Islands can also be rotated, scaled and repeated.

 

Conversational Part and Tool Probing options permit the computerized dimensional measurement of machined parts and the associated cutting tools.  This “on-machine” technique improves the throughput of the measurement process when compared to traditional “off-machine” approaches.

 

The Advanced Verification Graphics feature significantly reduces both scrap and programming time because it provides customers with a three-dimensional solid rendering of the part, including dynamic rotation. This feature allows a customer to view the rendered part from any angle without needing to redraw it.

 

The Tool and Material Library option stores the tool and material information with the machine instead of storing it with each individual part program. The user enters the tool data and geometry one time and chooses the particular tool from the list when it is needed. Additionally, the library reads the part program and automatically locates the tool or displays an alert if the tool does not exist. In addition to saving time, the Tool and Material Library eliminates the need to enter information repeatedly, and can prevent common tool crash conditions.

 

NC/Conversational Merge lets the user incorporate conversational features, such as tool probing, pattern operations, and scaling, into existing G-Code programs.

 

Job List provides an intuitive way to group files together and run them sequentially without operator intervention, which promotes automation, lights-out machining, program stitching, file bundling, and adaptive processes.

 

Thread Repair is a feature for turning applications that provides an efficient way to repair existing threads, which is especially beneficial for large pipes and other parts manufactured for the oil/energy sector.

 

Simultaneous Five-Axis Contouring software enables a five-axis machine to command motion concurrently on all axes. This allows the user to create continuous tool-paths along complex geometries with only a single machine/part setup, providing increased productivity along with the performance benefits of using shorter cutting tools. The sale of simultaneous five-axis contouring software is subject to government export licensing requirements.

 

LCM Machine Tool Components and Accessories

 

During the third quarter of fiscal 2013, we acquired the business of an Italian designer and manufacturer of electro-mechanical components and accessories for machine tools. We are operating this business through our subsidiary in Italy, LCM. We incorporate LCM products in many of our machine tools and also sell these products to third parties.

 

CNC Rotary Tables

 

LCM has five lines of CNC rotary tables for both horizontal and vertical-horizontal positioning. Customers can choose rotary tables with either hydraulic or pneumatic clamping systems. Additionally, LCM offers CNC rotary tables powered by either a torque motor or a high-precision mechanical transmission.

 

CNC Tilt Tables

 

LCM has seven lines of CNC tilting rotary tables, of which four lines are intended specifically for 5-axis machining centers. Each of the seven lines is differentiated by the technology used for clamping (hydraulic or pneumatic) and by the type of transmission (either mechanical transmission or torque motor).

 

6
 

 

Swivel Heads and Electro-spindles

 

LCM has two primary lines of swivel heads that enable the spindle axis to be tilted with continuous motion and one line of electro-spindles (built-in motors for swivel heads). Two lines of swivel heads are differentiated by the type of transmission (either mechanical transmission or torque motor).

 

Parts and Service

 

Our service organization provides installation, warranty, operator training and customer support for our products on a worldwide basis.  In the United States, our principal distributors have the primary responsibility for machine installation and warranty service and support for product sales.  Our service organization also sells software options, computer control upgrades, accessories and replacement parts for our products.  Our after-sales parts and service business strengthens our customer relationships and provides continuous information concerning the evolving requirements of end-users.

 

Manufacturing

 

Our computerized metal cutting machine tools are manufactured to our specifications primarily by our wholly-owned subsidiary in Taiwan, Hurco Manufacturing Limited (HML).  HML conducts final assembly operations and is supported by a network of contract suppliers of components and sub-assemblies that manufacture components for our products. Our facility in Indianapolis, Indiana also conducts final assembly operations for certain VMX machines for the North American market. Our manufacturing facility in Ningbo, China, focuses on the machining of castings to support HML’s production in Taiwan and has produced VM machines specifically for the Chinese market.

 

The LCM line of electro-mechanical components and accessories for machine tools are designed and manufactured in Italy. We use LCM products primarily in our 5-axis machine tools and also sell them separately to third parties.

 

We have a contract manufacturing agreement for computer control systems with Hurco Automation, Ltd. (HAL), a Taiwanese company in which we have a 35% ownership interest.  This company produces all of our computer control systems to our specifications, sources industry standard computer components and our proprietary parts, performs final assembly and conducts test operations.

 

We work closely with our subsidiaries, key component suppliers and HAL to ensure that their production capacity will be sufficient to meet the projected demand for our machine tool products.  Many of the key components used in our machines can be sourced from multiple suppliers. However, any prolonged interruption of operations or significant reduction in the capacity or performance capability at any of our manufacturing facilities, or at any of our key component suppliers, could have a material adverse effect on our operations.

 

Marketing and Distribution

 

We sell our products through more than 100 independent agents and distributors throughout North America, Europe and Asia.  Although some distributors carry competitive products, we are the primary line for the majority of our distributors globally.  We also have direct sales personnel in China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom and certain parts of the United States, which are among the world's principal machine tool consuming markets.

 

Approximately 84% of the worldwide demand for computerized machine tools and computer control systems is outside the United States.  In fiscal 2014, approximately 72% of our revenues were from overseas customers.  No single end-user or distributor of our products accounted for more than 5% of our total sales and service fees.

 

7
 

 

The end-users of our products are precision tool, die and mold manufacturers, independent job shops, and specialized short-run production applications within large manufacturing operations.  Industries served include aerospace, defense, medical equipment, energy, automotive/transportation, electronics and computer industries.

 

We also sell our Autobend® computer control systems to original equipment manufacturers of new metal fabrication machine tools that integrate them with their own products prior to the sale of those products to their own customers, to retrofitters of used metal fabrication machine tools that integrate them with those machines as part of the retrofitting operation, and to end-users that have an installed base of metal fabrication machine tools, either with or without related computer control systems.

 

Demand

 

We believe demand for our products is driven by advances in industrial technology and the related demand for automated process improvements.

 

Other factors affecting demand include:

the need to continuously improve productivity and shorten cycle time;
an aging machine tool installed base that will require replacement with more advanced technology;
the industrial development of emerging markets in Asia and Eastern Europe; and
the declining supply of skilled machinists.

 

Demand for our products is also highly dependent upon economic conditions and the general level of business confidence, as well as such factors as production capacity utilization and changes in governmental policies regarding tariffs, corporate taxation, fluctuations in foreign currencies, and other investment incentives.

 

Competition

 

We compete with many other machine tool producers in the United States and foreign countries.   Most of our competitors are larger and have greater financial resources than our company.  Major worldwide competitors include Deckel Maho Gildemeister Group (DMG), Mori Seiki Co., Ltd., Mazak, Haas Automation, Inc., Hardinge Inc., Doosan, and Okuma Machinery Works Ltd.

 

Through our subsidiary LCM, we compete with manufacturers of machine tool components and accessories such as IBAG, Kessler, Peron Speed, GSA Technology Co., LTD and Duplomatic Automation.

 

We strive to compete effectively by developing patentable software and other proprietary features that offer enhanced productivity, technological capabilities and ease of use.  We offer our products in a range of prices and capabilities to target a broad potential market.  We also believe that our competitiveness is aided by our reputation for reliability and quality, our strong international sales and distribution organization, and our extensive customer service organization.

 

Intellectual Property

 

We consider our products to be proprietary. Various features of our control systems and machine tools employ technologies covered by patents and trademarks that are material to our business. We also own additional patents covering new technologies that we have acquired or developed, and that we are planning to incorporate into our control systems in the future.

 

8
 

 

Research and Development

 

In the fiscal years set forth below, non-capitalized research and development expenditures for new products, significant product improvements and expenditures related to software development projects that were capitalized were as follows (in thousands):

 

Fiscal Year  Non-Capitalized
Research and
Development
   Capitalized
Software Development
 
           
2014  $3,400   $1,000 
2013   3,000    1,000 
2012   2,600    1,000 

 

Employees

 

We had approximately 617 full-time employees at the end of fiscal 2014, none of whom are covered by a collective-bargaining agreement or represented by a union. We have experienced no employee-generated work stoppages or disruptions and we consider our employee relations to be satisfactory.

 

Geographic Areas

 

Financial information about geographic areas in which we sell our products is set forth in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 15 of Notes to Consolidated Financial Statements. Some of the risks of doing business on a global basis are described in Item 1A. Risk Factors below.

 

Backlog

 

For information on orders and backlog, see Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

 

Availability of Reports and Other Information

 

Our website can be found at www.hurco.com. We use this website as a means of disclosing pertinent information about us, free of charge, including:

 

our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, proxy materials, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (Exchange Act), as soon as reasonably practicable after we electronically file that material with or furnish it to the SEC;

 

press releases on quarterly earnings, product announcements, legal developments and other material news that we may post from time to time;

 

corporate governance information including our Corporate Governance Principles, Code of Business Conduct and Ethics, information concerning our Board of Directors and its committees, including the charters of the Audit Committee, Compensation Committee, Nominating and Corporate Governance Committee and other governance-related policies; and

 

opportunities to sign up for email alerts and RSS feeds to have information provided in real time.

 

The information available on our website is not incorporated by reference in, or a part of, this or any other report we file with, or furnish to, the SEC.

 

9
 

 

Item 1A. RISK FACTORS

 

In this section we describe what we believe to be the material risks related to our business. The risks and uncertainties described below or elsewhere in this report are not the only ones to which we are exposed. Additional risks and uncertainties not presently known and/or risks we currently deem immaterial may also adversely affect our business and operations. If any of the developments included in the following risks were to occur, our business, financial condition, results of operations, cash flows or prospects could be materially adversely affected.

 

The cyclical nature of our business causes fluctuations in our operating results.

 

The machine tool industry is highly cyclical and changes in demand can occur abruptly in the geographic markets we serve. As a result of this cyclicality, we have experienced significant fluctuations in our sales, which, in periods of reduced demand, have adversely affected our results of operations and financial condition.

 

Uncertain economic conditions, particularly in Europe, may adversely affect overall demand.

 

We typically sell the majority of our larger high-performance VMX machines in Europe, which makes us particularly sensitive to economic and market conditions in that region. Therefore, economic uncertainty and business downturns in the European market adversely affect our results of operations and financial condition.

 

Our international operations pose additional risks that may adversely impact sales and earnings.

 

During fiscal 2014, approximately 72% of our revenues were derived from sales to customers located outside the United States. In addition, our manufacturing facilities are located outside of the United States. Our international operations are subject to a number of risks, including:

 

·trade barriers;
·regional economic uncertainty;
·differing labor regulation;
·governmental expropriation;
·domestic and foreign customs and tariffs;
·current and changing regulatory environments affecting the importation and exportation of products and raw materials;
·difficulty in obtaining distribution support;
·difficulty in staffing and managing widespread operations;
·differences in the availability and terms of financing;
·political instability and unrest; and
·changes in tax regulations and rates in foreign countries.

 

Quotas, tariffs, taxes or other trade barriers could require us to change manufacturing sources, reduce prices, increase spending on marketing or product development, withdraw from or not enter certain markets or otherwise take actions that could be adverse to us. Also, in some foreign jurisdictions, we may be subject to laws limiting the right and ability of entities organized or operating therein to pay dividends or remit earnings to affiliated companies unless specified conditions are met. These factors may adversely affect our future operating results. The vast majority of our products are shipped from our manufacturing facility in Taiwan from the Port of Taichung to three ports of destination: Los Angeles, California, Venlo, the Netherlands, and Shanghai, China. Changes in customs requirements, as a result of national security or other constraints put upon these ports, may also have an adverse impact on our results of operations.

 

10
 

 

Additionally, we must comply with complex foreign and U.S. laws and regulations, such as the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act, and other foreign laws prohibiting corrupt payments to governmental officials, and anti-competition regulations. Violations of these laws and regulations could result in fines and penalties, criminal sanctions, restrictions on our business conduct and on our ability to offer our products in one or more countries, and could also materially affect our brand, our ability to attract and retain employees, our international operations, our business and our operating results. Although we have implemented policies and procedures designed to ensure compliance with these laws and regulations, there can be no assurance that our employees, contractors, or agents in foreign countries will not violate our policies.

 

We depend on limited sources for our products.

 

Our wholly-owned subsidiaries, Hurco Manufacturing Limited, Ningbo Hurco Manufacturing Limited and LCM Precision Technology S.r.l., produce our machine tools and electro-mechanical components and accessories in Taiwan, China and Italy, respectively. An unplanned interruption in manufacturing would have a material adverse effect on our results of operations and financial condition. Such an interruption could result from a change in the political environment or a natural disaster, such as an earthquake, typhoon, or tsunami. Any interruption in service by one of our key component suppliers, if prolonged, also could have a material adverse effect on our results of operations and financial condition.

 

Fluctuations in the exchange rates between the U.S. Dollar and any of several foreign currencies can increase our costs and decrease our revenues.

 

Our foreign sales, which generate approximately 72% of our revenues, are invoiced and received in several foreign currencies, primarily the Euro, Pound Sterling and Chinese Yuan. Therefore, our results of operations and financial condition are affected by fluctuations in exchange rates between these currencies and the U.S. Dollar, both for purposes of actual conversion and for financial reporting purposes. In addition, we are exposed to exchange risk associated with our purchases of materials and components for our Taiwan manufacturing operations, which are primarily made in the New Taiwan Dollar. We hedge our foreign currency exposure with the purchase of forward exchange contracts. These hedge contracts only mitigate the impact of changes in foreign currency rates that occur during the term of the related contract period and carry risks of counter-party failure. There can be no assurance that our hedges will have their intended effects.

 

Our competitive position and prospects for growth may be diminished if we are unable to develop and introduce new and enhanced products on a timely basis that are accepted in the market.

 

The machine tool industry is subject to technological change, evolving industry standards, changing customer requirements, and improvements in and expansion of product offerings. Our ability to anticipate changes in technology, industry standards, customers’ requirements and competitors’ product offerings and to develop and introduce new and enhanced products on a timely basis that are accepted in the market, are significant factors in maintaining and improving our competitive position and growth prospects. If the technologies or standards used in our products become obsolete or fail to gain widespread commercial acceptance, our business would be materially adversely affected. Although we believe that we have the technological capabilities to remain competitive, developments by others may render our products or technologies obsolete or noncompetitive.

 

We compete with larger companies that have greater financial resources, and our business could be harmed by competitors’ actions.

 

The markets in which our products are sold are extremely competitive and highly fragmented. In marketing our products, we compete with other manufacturers in terms of quality, reliability, price, value, delivery time, service and technological characteristics. We compete with a number of U.S., European and Asian competitors, most of which are larger, have substantially greater financial resources and have been supported by governmental or financial institution subsidies and, therefore, may have competitive advantages over us. While we believe our product lines compete effectively, our financial resources are limited compared to those of most of our competitors, making it challenging to remain competitive.

 

11
 

 

Fluctuations in the price of raw materials, especially steel and iron, could adversely affect our sales, costs and profitability.

 

We manufacture products with a high iron and steel content. The availability and price for these and other raw materials are subject to volatility due to worldwide supply and demand forces, speculative actions, inventory levels, exchange rates, production costs and anticipated or perceived shortages. In some cases, those cost increases can be passed on to customers in the form of price increases; in other cases they cannot. If the prices of raw materials increase and we are not able to charge our customers higher prices to compensate, our results of operations would be adversely affected.

 

Regulations related to “conflict minerals” may cause us to incur additional expenses and could limit the supply and increase the cost of certain metals used in manufacturing our products.

 

The SEC requires disclosure by public companies of specified minerals, known as conflict minerals, that are necessary to the functionality or production of products manufactured or contracted to be manufactured. The rule requires a disclosure report to be filed annually with the SEC, beginning in 2014, and requires companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo or an adjoining country. The rule could affect sourcing at competitive prices and availability in sufficient quantities of certain minerals used in the manufacture of components that are incorporated into our products, including tin, tantalum, gold and tungsten. The number of suppliers that provide conflict-free minerals may be limited. In addition, there may be material costs associated with complying with the disclosure requirements, such as costs related to the due diligence process of determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. We may not be able to sufficiently verify the origins of the relevant minerals used in components manufactured by third parties through the due diligence procedures that we implement, which may harm our reputation. We may also encounter challenges to satisfy those customers that require that all of the components of our products be certified as conflict-free, which could place us at a competitive disadvantage if we are unable to do so.

 

Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excess.

 

The technology within our products changes and, generally, we bring new versions of our machines to market in three-year to five-year cycles. The phasing out of an old product involves estimating the amount of inventory to hold to satisfy the final demand for those machines and to satisfy future repair part needs. Based on changing customer demand and expectations of delivery times for repair parts, we may find that we have either obsolete or excess inventory on hand. Because of unforeseen future changes in technology, market demand or competition, we might have to write off unusable inventory, which would adversely affect our results of operations.

 

Acquisitions could disrupt our operations and harm our operating results.

 

In 2013, we acquired a machine tool component business in Italy (namely, LCM) and we may seek additional opportunities to expand our product offerings or the markets we serve by acquiring other companies, product lines, technologies and personnel. Acquisitions involve numerous risks, including the following:

 

  · difficulties integrating the operations, technologies, products, and personnel of an acquired company;
  · diversion of management’s attention from normal daily operations of the business;
  · potential difficulties completing projects associated with in-process research and development;
  · difficulties entering markets in which we have no or limited prior experience, especially when competitors in such markets have stronger market positions;

 

12
 

 

  · initial dependence on unfamiliar supply chains or relatively small supply partners;
  · insufficient revenues to offset increased expenses associated with acquisitions; and
  · the potential loss of key employees of the acquired companies.

 

Acquisitions may also cause us to:

 

·issue common stock that would dilute our current shareholders’ percentage ownership;
·assume liabilities of an acquired company;
·record goodwill and non-amortizable intangible assets that will be subject to impairment testing on a regular basis and potential periodic impairment charges;
·incur amortization expenses related to certain intangible assets;
·incur large and immediate write-offs, and restructuring and other related expenses; and
·become subject to litigation.

 

Mergers and acquisitions are inherently risky. No assurance can be given that our acquisitions will be successful. Further, no assurance can be given that an acquisition will not adversely affect our business, operating results, or financial condition. Failure to manage and successfully integrate an acquisition could harm our business and operating results in a material way. Even when an acquired company has already developed and marketed products, there can be no assurance that enhancements to those products will be made in a timely manner or that pre-acquisition due diligence will identify all possible issues that might arise with respect to such products.

 

Risks related to new product development also apply to acquisitions. For additional information, please see the risk factor above entitled, “Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excess.”

 

Assets may become impaired, requiring us to record a significant charge to earnings.

 

We review our assets, including intangible assets such as goodwill, for indications of impairment when events or changes in circumstances indicate the carrying value may not be recoverable. We could be required to record a significant charge to earnings in our financial statements for the period in which any impairment of these assets is determined, which would adversely affect our results of operations for that period.

 

We may experience negative or unforeseen tax consequences.

 

We may experience negative or unforeseen tax consequences.  We review the probability of the realization of our net deferred tax assets each period based on forecasts of taxable income in both the U.S. and foreign jurisdictions.  This review uses historical results, projected future operating results based upon approved business plans, eligible carryforward periods, tax-planning opportunities and other relevant considerations.  Adverse changes in the profitability and financial outlook in the U.S. or foreign jurisdictions may require the creation of a valuation allowance to reduce our net deferred tax assets.  Such changes could result in material non-cash expenses in the period in which the changes are made and could have a material adverse impact on our results of operations and financial condition. 

 

Our continued success depends on our ability to protect our intellectual property.

 

Our future success depends in part upon our ability to protect our intellectual property. We rely principally on nondisclosure agreements, other contractual arrangements, trade secret law, trademark registration and patents to protect our intellectual property. However, these measures may be inadequate to protect our intellectual property from infringement by others or prevent misappropriation of our proprietary rights. In addition, the laws of some foreign countries do not protect proprietary rights to the same extent as do U.S. laws. Our inability to protect our proprietary information and enforce our intellectual property rights through infringement proceedings could have a material adverse effect on our business, financial condition and results of operations.

 

13
 

 

The unanticipated loss of current members of our senior management team and other key personnel may adversely affect our operating results.

 

The unexpected loss of members of our senior management team or other key personnel could impair our ability to carry out our business plan. We believe that our future success will depend in part on our ability to attract and retain highly skilled and qualified personnel. The loss of senior management or other key personnel may adversely affect our operating results as we incur costs to replace the departed personnel and potentially lose opportunities in the transition of important job functions.

 

If our network and system security measures are breached and unauthorized access is obtained to our data, our customers’ or vendors’ data, or to our critical information technology systems, we may incur legal and financial exposure and liabilities.

 

As part of our business, we store our data and certain data about our customers and vendors in our information technology systems. If a third party gained unauthorized access to our data, including any data regarding our customers or vendors, the security breach could expose us to risks, including loss of business, litigation and possible liability. These security measures may be breached as a result of third-party action, including intentional misconduct by computer hackers, employee error, malfeasance or otherwise. Additionally, third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as user names, passwords or other information to gain access to our customers' data or our data, including our intellectual property and other confidential business information, or our information technology systems. Although we work closely with industry recognized manufacturers supporting the security measures we have employed in an effort to keep our technology current with the ongoing threats, the techniques used to obtain unauthorized access, or to sabotage systems, change frequently, and therefore we may be unable to anticipate these techniques or to implement adequate preventative measures. Any security breach could result in: the unauthorized publication of our confidential business or proprietary information; the unauthorized release of customer or vendor data and payment information; a loss of confidence by our customers; damage to our reputation; a disruption to our business; litigation and legal liability; and a negative impact on our future sales.  In addition, the cost and operational consequences of implementing further data protection measures could be significant.

 

14
 

 

Item 1B.    Unresolved Staff Comments

 

None.

 

Item 2.       PROPERTIES

 

The following table sets forth the principal use, location, and size of each of our facilities:

 

Principal Uses  Locations  Square Footage 
        
Corporate headquarters, design and engineering, product testing, sales and marketing, application engineering and customer service.  Indianapolis, Indiana, USA (1)   165,000 
         
Manufacturing  Taichung, Taiwan   309,900 
   Ningbo, China   31,000 
   Castell’Alfero, Italy   32,300 
         
Sales, design engineering, product testing and customer service.  Dexter, Michigan, USA   3,000 
         
Sales, application engineering and customer service.  High Wycombe, England
Benoni, South Africa
   

16,000

2,500

 
   Paris and Toulouse, France   11,100 
   Munich and Verl, Germany   20,100 
   Milan, Italy   10,800 
   Netherlands   9,700 
   Singapore   3,900 
   Shanghai, Dongguan, Shenyang     
   and Beijing, China   23,000 
   Chennai, Delhi, and Pune India   7,200 
   Liegnitz, Poland   2,900 
   Grand Rapids, Michigan, USA   5,000 
   Ball Ground, Georgia, USA   5,200 

 

 

(1) Approximately 34,000 square feet is leased to a third-party under a lease that expires April 30, 2016.

 

We own the Indianapolis facility and lease all other facilities. The leases have terms expiring at various dates ranging from November 2014 to March 2024. We believe that all of our facilities are well maintained and are adequate for our needs now and in the foreseeable future. We do not believe that we would experience any difficulty in replacing any of the present facilities if any of our leases were not renewed at expiration.

 

 

15
 

  

Item 3.       LEGAL PROCEEDINGS

 

From time to time we are involved in various claims and lawsuits arising in the normal course of business. We do not expect any of these claims, individually or in the aggregate, to have a material adverse effect on our consolidated financial position or results of operations. Any claims that have been filed against us are properly reflected on our consolidated financial position and results of operations and we believe that the ultimate resolution of claims for any losses will not exceed our insurance policy coverages.

  

Item 4.       SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

 

None.

 

Executive Officers of the Registrant

 

Executive officers are elected each year by the Board of Directors following the Annual Meeting of Shareholders to serve during the ensuing year and until their respective successors are elected and qualified. There are no family relationships between any of our executive officers or between any of them and any of the members of the Board of Directors.

 

The following information sets forth as of October 31, 2014, the name of each executive officer and his or her age, tenure as an officer, principal occupation and business experience for the last five years:

 

Name   Age   Position(s) with the Company
         
Michael Doar   59   Chairman of the Board and Chief Executive Officer
         
Gregory S. Volovic   50   President
         
Sonja K. McClelland   43   Vice President, Secretary, Treasurer and Chief Financial Officer
         
John P. Donlon   57   Executive Vice President, International Sales/Service

 

Michael Doar was elected Chairman of the Board and Chief Executive Officer on November 14, 2001. Mr. Doar had held various management positions with Ingersoll Milling Machine Company from 1989 until 2001. Mr. Doar has been a director of Hurco since 2000.

 

Gregory S. Volovic has been employed by us since March 2005 and was elected as our President in March 2013. Mr. Volovic previously held the position of Executive Vice President, Software and Engineering until October 2009. Prior to joining us, Mr. Volovic held various positions with Thomson, Inc. including Director of E-Business, Engineering, and Information Technology. Prior to that, Mr. Volovic was employed by Unisys Corporation.

 

Sonja K. McClelland has been employed by us since September 1996 and was elected Vice President, Secretary, Treasurer and Chief Financial Officer in March 2014. Ms. McClelland served as Corporate Accounting Manager from September 1996 to 1999, as Division Controller for Hurco USA from September 1999 to November 2004, and as our Corporate Controller and Assistant Secretary from November 2004 to March 2014. Prior to joining us, Ms. McClelland was employed for three years by an international public accounting firm.

 

John P. Donlon has been employed by us since April 2010 as Executive Vice President, International Sales/Service.  Prior to joining us, Mr. Donlon served as the Vice President of Sales for Yaskawa America Robotics since 2008. From 2004 to 2008, Mr. Donlon served as the Vice President of Sales and Marketing for Ansaldo STS, a worldwide supplier of automation technologies to the rail industry. Earlier in his career, Mr. Donlon held executive sales and management positions with other multi-national companies including Honeywell and ABB, and he has significant international experience in the emerging markets of China, Russia and Brazil.

 

16
 

 

PART II

 

Item 5.          MARKET FOR THE REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES 

 

Market Information

 

Our common stock is traded on the Nasdaq Global Select Market under the symbol “HURC”. The following table sets forth, for the periods indicated, the high and low sale prices as reported by the Nasdaq Global Select Market and declared dividends per share of our common stock.

 

   2014   Declared   2013   Declared 
Fiscal Quarter Ended:  High   Low   Dividends   High   Low   Dividends 
January 31  $26.91   $23.63   $.05   $30.33   $21.22     
April 30   28.52    24.00   $.07    30.50    24.16     
July 31   37.87    24.98   $.07    31.61    26.21   $.05 
October 31   39.64    30.88   $.07    30.35    23.52   $.05 

 

On December 31, 2014, the closing price of our common stock on the Nasdaq Global Select Market was $34.09.

 

Holders

 

There were 134 holders of record of our common stock as of December 31, 2014.

 

Dividend Policy

 

We began declaring cash dividends on our common stock in the third quarter of fiscal 2013, and we expect to continue to declare dividends on a quarterly basis; however, the declaration and amount of any future cash dividends will be subject to the sole discretion of our Board of Directors and will depend upon many factors, including our results of operations, financial condition, capital requirements, regulatory and contractual restrictions, our business strategy and other factors deemed relevant by our Board of Directors.

 

Our payment of dividends is limited by our U.S. credit agreement, as further described in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and in Note 5 of Notes to Consolidated Financial Statements.

 

Other Information

 

During the period covered by this report, we did not sell any equity securities that were not registered under the Securities Act of 1933, as amended.

 

The disclosure under the caption “Equity Compensation Plan Information” is incorporated by reference in Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

 

The performance graph information is included in Item 9B. Other Information.

 

17
 

 

Item 6.       SELECTED FINANCIAL DATA

 

The Selected Financial Data presented below has been derived from our consolidated financial statements for the years indicated and should be read in conjunction with the consolidated financial statements and related notes set forth elsewhere herein and Management’s Discussion and Analysis of Financial Condition and Results of Operations.

 

   Year Ended October 31, 
   2014   2013   2012   2011   2010 
Statement of Operations Data:  (In thousands, except per share amounts) 
                     
Sales and service fees  $222,303   $192,804   $203,117   $180,400   $105,893 
Gross profit   68,612    55,056    63,181    55,874    21,796 
Selling, general and administrative expenses   46,615    41,413    41,160    38,493    29,837 
Operating income (loss)   21,997    13,643    22,021    17,381    (8,041)
Other income (expense)   (636)   (1,201)   (157)   (1,762)   (818)
Net income (loss)   15,143    8,190    15,638    11,124    (5,744)
Earnings (loss) per common share- diluted   2.30    1.25    2.40    1.71    (0.89)
Weighted average common shares outstanding-diluted   6,538    6,497    6,470    6,472    6,441 
Dividends declared per
common share.
  $.26   $.10             
                          

 

 

   As of October 31, 
   2014   2013   2012   2011   2010 
Balance Sheet Data:  (Dollars in thousands) 
                     
Current assets  $210,754   $185,002   $173,381   $164,074   $136,208 
Current liabilities   66,803    55,686    49,372    57,228    42,240 
Working capital   143,951    129,316    124,009    106,846    93,968 
Current ratio   3.2    3.3    3.5    2.9    3.2 
Total assets   236,931    211,235    195,312    186,545    160,346 
Non-current liabilities   5,483    4,058    2,147    3,105    3,366 
Total debt   3,272    3,665    3,206    865     
Shareholders’ equity   164,645    151,491    143,793    126,212    114,740 
18
 

 

Item 7.        MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

EXECUTIVE OVERVIEW

 

Hurco Companies, Inc. is an industrial technology company operating in a single segment. We design and produce computerized machine tools, featuring our proprietary computer control systems and software, for sale through our own distribution network to the worldwide metal cutting market. We also provide machine tool components, software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

 

The following overview is intended to provide a brief explanation of the principal factors that have contributed to our recent financial performance. This overview is intended to be read in conjunction with the more detailed information included in our audited financial statements that appear elsewhere in this report.

 

The market for machine tools is international in scope. We have both significant foreign sales and significant foreign manufacturing operations. During fiscal 2014, approximately 62% of our revenues were attributable to customers in Europe, where we typically sell more of our higher-performance, higher-priced VMX series machines. Additionally, approximately 10% of our revenues were attributable to customers in Asia, where we sell more of our entry-level, lower-priced machines, but where we also encounter greater price pressures. We sell our products through more than 100 independent agents and distributors in countries throughout North America, Europe and Asia. We also have our own direct sales and service organizations in China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom and certain parts of the United States. The vast majority of our machine tools are manufactured to our specifications primarily by our wholly-owned subsidiary in Taiwan, Hurco Manufacturing Limited (HML). Machine castings and components to support HML’s production are manufactured at our facility in Ningbo, China.

 

During the third quarter of fiscal 2013, we acquired the machine tool component business of LCM S.r.l, an Italian designer and manufacturer of electro-mechanical components and accessories for machine tools. We are operating this business through our wholly-owned subsidiary, LCM Precision Technology S.r.l. (LCM). We have used LCM components in our SRT line of five-axis machining centers that employs LCM's direct drive spindle, swivel head, and rotary torque table to achieve superior simultaneous five-axis machining. Based in Italy, this business has been producing and selling mechanical and electro-mechanical components for machine tools since 1986.

 

Our sales to foreign customers are denominated, and payments by those customers are made, in the prevailing currencies—primarily the Euro, Pound Sterling and Chinese Yuan—in the countries in which those customers are located. Our product costs are incurred and paid primarily in the New Taiwan Dollar and the U.S. Dollar. Changes in currency exchange rates may have a material effect on our operating results and consolidated balance sheets as reported under U.S. Generally Accepted Accounting Principles. For example, when the U.S. Dollar weakens in value relative to a foreign currency, sales made, and expenses incurred, in that currency when translated to U.S. Dollars for reporting in our financial statements, are higher than would be the case when the U.S. Dollar is stronger. In the comparison of our period-to-period results, we discuss the effect of currency translation on those results including the increases or decreases in those results as reported in our financial statements (which reflect translation to U.S. Dollars at exchange rates prevailing during the period covered by those financial statements) and also the effect that changes in exchange rates had on those results.

 

Our high levels of foreign manufacturing and sales also subject us to cash flow risks due to fluctuating currency exchange rates. We seek to mitigate those risks through the use of various derivative instruments – principally foreign currency forward exchange contracts.

 

19
 

 

 

Results of Operations

 

The following table presents, for the fiscal years indicated, selected items from the Consolidated Statements of Income expressed as a percentage of our worldwide sales and service fees and the year-to-year percentage changes in the dollar amounts of those items.

 

   Percentage of Revenues   Year-to-Year % Change 
   2014   2013   2012   Increase (Decrease) 
               ’14 vs. ’13   ’13 vs. ’12 
Sales and service fees   100%   100%   100%   15%   (5)%
Gross profit   31%   29%   31%   25%   (13)%
Selling, general and administrative expenses   21%   21%   20%   13%   1%
Operating income (loss)   10%   7%   11%   61%   (38)%
Net income (loss)   7%   4%   8%   85%   (48)%

 

Fiscal 2014 Compared to Fiscal 2013

 

Sales and Service Fees. Annual sales and service fees for fiscal 2014 were $222.3 million, an increase of $29.5 million, or 15%, from fiscal 2013. The year-over-year increase included a favorable currency impact of $3.3 million, primarily due to a stronger Euro and Pound Sterling when translating foreign sales to U.S. Dollars for financial reporting purposes.

 

Net Sales and Service Fees by Geographic Region

 

The following table sets forth net sales and service fees by geographic region for the fiscal years ended October 31, 2014 and 2013 (in thousands):

 

   October 31,   Increase (Decrease) 
   2014   2013   Amount   % 
North America  $62,142    28%  $60,759    32%  $1,383    2%
Europe   138,201    62%   114,855    59%   23,346    20%
Asia Pacific   21,960    10%   17,190    9%   4,770    28%
Total  $222,303    100%  $192,804    100%  $29,499    15%

 

Sales and service fees increased in all regions during fiscal 2014. The improvement in sales was primarily driven by an overall increase in the volume of machine tool sales and a favorable mix of higher-performance machines. During the first three quarters of fiscal 2014, sales in North America experienced some market softening in comparison to the same periods in fiscal 2013. However, following the International Manufacturing Technology Show in September 2014, sales of machine tools in North America increased due to year-end promotional activities, resulting in a 19% increase in the fourth quarter of fiscal 2014 compared to the same period in fiscal 2013. This surge in orders and shipments in the fourth quarter of fiscal 2014 resulted in a total year-over-year increase in sales and service fees in North America for fiscal 2014 of approximately 2% compared to fiscal 2013. The increased sales in Europe and Asia were attributable to improved market conditions and sales of our expanded product line of VMX machines. European sales and service fees for fiscal 2014 included $7.7 million of sales from electro-mechanical components and accessories manufactured by LCM, compared to $2.4 million in fiscal 2013.

 

20
 

  

Net Sales and Service Fees by Product Category

 

The following table sets forth net sales and service fees by product category for the years ended October 31, 2014 and 2013 (in thousands):

 

   October 31,   Increase (Decrease) 
   2014   2013   Amount   % 
Computerized Machine Tools  $193,937    87%  $166,896    87%  $27,041    16%
Service Fees, Parts and Other   28,366    13%   25,908    13%   2,458    9%
Total  $222,303    100%  $192,804    100%  $29,499    15%

 

Orders and Backlog. Orders for fiscal 2014 were $232.5 million, an increase of $34.6 million, or 17%, over fiscal 2013, and included $9.9 million of orders for LCM products compared to $5.7 million for fiscal 2013. Orders for fiscal 2014 increased in all geographic regions in comparison to fiscal 2013. Over 80% of the year-over-year increase was driven by increased orders in Europe, primarily Germany and the United Kingdom. The impact of currency translation on orders booked for fiscal 2014 was consistent with the impact on sales. Backlog was $39.8 million at October 31, 2014 and included $5.2 million of backlog for LCM products, compared to $31.3 million and $3.3 million, respectively, for LCM products, at October 31, 2013. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2014 are expected to be fulfilled in fiscal 2015.

 

Gross Profit. Gross profit for fiscal 2014 was $68.6 million, or 31% of sales, compared to $55.1 million, or 29% of sales, for fiscal 2013. The increase in gross profit was attributable to higher sales volumes, particularly in Europe, the primary market for higher-performance machines, and increased cost efficiencies realized from higher production levels.

 

Operating Expenses. Selling, general and administrative expenses for fiscal 2014 were $46.6 million, or 21% of sales, compared to $41.4 million, or 21% of sales, for fiscal 2013. The year-over-year increase in selling, general and administrative expenses was primarily due to incremental operating expenses associated with the acquisition of the LCM business, increased tradeshow expenses, and increased incentive compensation expenses for employees.

 

Operating Income (Loss). Operating income for fiscal 2014 was $22.0 million, or 10% of sales, compared to $13.6 million, or 7% of sales, in fiscal 2013. The increase in operating income year-over-year was primarily due to the increase in sales and cost efficiencies realized from higher production levels.

 

Other (Income) Expense. Other expense for fiscal 2014 decreased by $0.6 million from fiscal 2013 due to lower foreign currency losses experienced in fiscal 2014.

 

Provision (Benefit) for Income Taxes. Our effective tax rate for fiscal 2014 was 29% in comparison to 34% for fiscal 2013. The decrease in the effective income tax rate in fiscal 2014 was due primarily to changes in the geographic mix of income or loss among tax jurisdictions.

 

Net Income (Loss). Net income for fiscal 2014 was $15.1 million, or $2.30 per diluted share, an increase of $7.0 million, or 85%, from fiscal 2013 net income of $8.2 million, or $1.25 per diluted share.

 

21
 

  

Fiscal 2013 Compared to Fiscal 2012

 

Sales and Service Fees. Annual sales and service fees for fiscal 2013 were $192.8 million, a decrease of $10.3 million, or 5%, from fiscal 2012. The impact of currency translation on the year-over-year comparison was not material.

 

The overall decline in total sales was due primarily to the adverse impact of weak market conditions in Europe, the primary market for our high-performance machine tools and continuing weakness throughout the Asia Pacific region.

 

Net Sales and Service Fees by Geographic Region

 

The following table sets forth net sales and service fees by geographic region for the fiscal years ended October 31, 2013 and 2012 (in thousands):

 

   October 31,   Increase (Decrease) 
   2013   2012   Amount   % 
North America  $60,759    32%  $60,527    30%  $232    0%
Europe   114,855    59%   119,359    59%   (4,504)   (4)%
Asia Pacific   17,190    9%   23,231    11%   (6,041)   (26)%
Total  $192,804    100%  $203,117    100%  $(10,313)   (5)%

 

European sales included $2.4 million for fiscal 2013 that was attributable to sales of LCM electro-mechanical components and accessories after July 1, 2013.

 

Net Sales and Service Fees by Product Category

 

The following table sets forth net sales and service fees by product category for the years ended October 31, 2013 and 2012 (in thousands):

 

   October 31,   Increase (Decrease) 
   2013   2012   Amount   % 
Computerized Machine Tools  $166,896    87%  $179,337    88%  $(12,441)   (7)%
Service Fees, Parts and Other   25,908    13%   23,780    12%   2,128    9%
                               
Total  $192,804    100%  $203,117    100%  $(10,313)   (5)%

 

Orders and Backlog. New order bookings in fiscal 2013 were $197.9 million, which were consistent with the level of orders received during fiscal 2012, as orders for LCM products offset lower order levels for our other product lines as a result of unfavorable market conditions. The largest decrease in order activity was in Asia where machine tool demand has declined. The impact of currency translation on orders booked for the full fiscal year was not material. Backlog was $31.3 million at October 31, 2013 and included $3.3 million of backlog for LCM products, compared to $25.8 million at October 31, 2012. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2013 are expected to be fulfilled in fiscal 2014.

 

Gross Profit. Gross profit for fiscal 2013 was $55.1 million, or 29% of sales, compared to $63.2 million, or 31% of sales for fiscal 2012. The decrease in gross profit was due primarily to lower sales and increased pricing pressures in Europe, which is the primary market for our larger, higher performance machines, as well as the adverse effect of leveraging fixed costs over lower gross sales.

 

22
 

  

Operating Expenses. Selling, general and administrative expenses were $41.4 million for fiscal 2013, an increase of $0.3 million, or 1%, from fiscal 2012. During fiscal 2013 we incurred approximately $0.7 million of one-time costs related to the acquisition of LCM.

 

Operating Income (Loss). Operating income for fiscal 2013 was $13.6 million, or 7% of sales, compared to an operating income of $22.0 million, or 11% of sales, in fiscal 2012. The reduction in operating income year-over-year was primarily due to the decrease in sales and pricing pressure in Europe.

 

Other (Income) Expense. Other expense for fiscal 2013 increased by $1.0 million from fiscal 2012 due to higher foreign currency losses experienced in fiscal 2013.

 

Provision (Benefit) for Income Taxes. Our effective tax rate for fiscal 2013 was 34% in comparison to 28% for fiscal 2012. The increase in the effective income tax rate in fiscal 2013 was due primarily to valuation allowances recorded on net operating loss and tax credit carry-forwards.

 

Net Income (Loss). Net income for fiscal 2013 was $8.2 million, or $1.25 per diluted share, a decrease of $7.4 million, or 48%, from fiscal 2012 net income of $15.6 million, or $2.40 per diluted share.

 

Liquidity and Capital Resources

 

At October 31, 2014, we had cash and cash equivalents of $53.8 million compared to $42.8 million at October 31, 2013. Approximately 57% of our $53.8 million of cash and cash equivalents is held in the U.S. The remaining balances are denominated in various foreign currencies and held by our foreign subsidiaries. These balances are associated with our permanent reinvestment strategy and are subject to fluctuations in currency exchange rates. We do not believe that the indefinite reinvestment of these funds offshore impairs our ability to meet our domestic working capital needs.

 

Working capital, excluding cash, was $90.1 million at October 31, 2014, compared to $86.5 million at October 31, 2013. The increase in working capital, excluding cash, was primarily due to an increase in accounts receivable.

 

Inventories were $96.0 million and remained relatively unchanged compared to October 31, 2013. Inventory turns were 1.5 as of October 31, 2014 and October 31, 2013.

 

Capital expenditures were $2.6 million in fiscal 2014 and $2.4 million in fiscal 2013. Capital expenditures for fiscal 2014 were primarily for the purchase of factory equipment for production facilities in Taiwan, and software development costs. We funded these expenditures with cash flow from operations.

 

On December 5, 2014, we amended our credit agreement (the “U.S. credit agreement”) that provides us with a $12.5 million unsecured revolving credit. This amendment increased the cash dividend allowance from $3.0 million per calendar year to $4.0 million per calendar year and extended the scheduled maturity date of the agreement to December 7, 2016. The U.S. credit agreement also permits the issuance of up to $5.0 million in letters of credit.

 

Borrowings under the U.S. credit agreement bear interest at a LIBOR-based rate or a floating rate of 1% above the prevailing prime rate. The floating rate will not be less than the greatest of (a) a one month LIBOR-based rate plus 1.00% per annum, (b) the federal funds effective rate plus 0.50% per annum, and (c) the prevailing prime rate. The rate we must pay for that portion of the U.S. credit agreement which is not utilized is 0.05% per annum.

 

The U.S. credit agreement contains customary financial covenants, including a covenant that permits us to make investments in subsidiaries of up to $5.0 million and a minimum working capital of $90.0 million and a minimum tangible net worth of $120.0 million. The U.S. credit agreement permits us to pay cash dividends in an amount not to exceed $4.0 million per calendar year, so long as we are not in default before and after giving effect to such dividends.  

 

23
 

  

At October 31, 2014, we had $3.3 million of borrowings under our China credit facility. We had no other debt or borrowings under any of our other credit facilities. At October 31, 2014, we were in compliance with the covenants contained in all of our credit facilities and had $18.7 million of available borrowing capacity under those facilities.

 

We believe our cash position and borrowing capacity under our credit facilities provides adequate liquidity to fund our operations over the next twelve months, pay quarterly cash dividends and execute our strategic plan for product innovation and targeted penetration of developing markets.

 

We continue to receive and review information on businesses and assets for potential acquisition, including intellectual property assets, which are available for purchase.

 

Contractual Obligations and Commitments

 

The following is a table of contractual obligations and commitments as of October 31, 2014 (all amounts in thousands):

 

   Payments Due by Period 
   Total   Less than
1 Year
   1-3
Years
   3-5
Years
   More than
5 Years
 
Short-term debt  $3,272   $3,272   $   $   $ 
Operating Leases   9,854    3,325    4,069    1,644    816 
Other   4,490        1,000    1,054    2,436 
Total  $17,616   $6,597   $5,069   $2,698   $3,252 

 

In addition to the contractual obligations and commitments disclosed above, we also have a variety of other obligations for the procurement of materials and services, none of which subject us to any material non-cancelable commitments. While some of these obligations arise under long-term supply agreements, we are not committed under these agreements to accept or pay for requirements that are not needed to meet our production needs. We have no material minimum purchase commitments or “take-or-pay” type agreements or arrangements. Unrecognized tax benefits in the amount of approximately $1.2 million, excluding any interest and penalties, have been excluded from the table above because we are unable to determine a reasonably reliable estimate of the timing of future payment.

 

We expect capital spending in fiscal 2015 to be approximately $4.5 million, which includes investments for capitalized software, capital equipment and costs to continue implementation of our integrated computer system. We expect to fund these commitments with cash on hand and cash generated from operations.

 

Off Balance Sheet Arrangements

 

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of machines to customers that use financing. As of October 31, 2014, we had 18 outstanding third party payment guarantees totaling approximately $1.5 million. The terms of these guarantees are consistent with the underlying customer financing terms. Upon shipment of a machine, the customer has the risk of ownership. The customer does not obtain title, however, until it has paid for the machine. A retention of title clause allows us to recover the machine if the customer defaults on the financing. We accrue for potential liabilities under these guarantees when we believe a loss is probable and can be estimated.

 

We provide warranties on our products with respect to defects in material and workmanship. The terms of these warranties are generally one year for machines and shorter periods for service parts. We recognize a reserve with respect to this obligation at the time of product sale, with subsequent warranty claims recorded against the reserve. The amount of the warranty reserve is determined based on historical trend experience and any known warranty issues that could cause future warranty costs to differ from historical experience.

 

24
 

  

Critical Accounting Policies and Estimates

 

Our discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with U.S. Generally Accepted Accounting Principles. The preparation of financial statements in conformity with those accounting principles require us to make judgments and estimates that affect the amounts reported in the consolidated financial statements and accompanying notes. Those judgments and estimates have a significant effect on the financial statements because they result primarily from the need to make estimates about the effects of matters that are inherently uncertain. Actual results could differ from those estimates. Our accounting policies, including those described below, are frequently evaluated as our judgment and estimates are based upon historical experience and on various other assumptions that are believed to be reasonable under the circumstances.

 

Revenue Recognition - We recognize revenue from sales of our machine tool systems upon delivery of the product to the customer, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. In certain foreign locations, we retain title after shipment under a “retention of title” clause solely to protect collectability. The retention of title is similar to Uniform Commercial Code (“UCC”) filings in the United States and provides the creditor with additional rights to the machine if the customer fails to pay. Revenue recognition at the time of shipment is appropriate in this instance as all risks of ownership have passed to the buyer and collectability is reasonably assured and protected under the “retention of title” clause. Our computerized machine tools are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon contractual customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications.

 

Depending upon geographic location, after shipment, a machine may be installed at the customer’s facilities by a distributor, independent contractor or by one of our service technicians. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process to be inconsequential and perfunctory.

 

Service fees from maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract. Sales related to software products are recognized when shipped in conformity with U.S. Generally Accepted Accounting Principles as promulgated by Financial Accounting Standards Board or its predecessor (FASB guidance) related to software revenue recognition that requires at the time of shipment, persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. The software does not require production, modification or customization.

 

Inventories – We determine at each balance sheet date how much, if any, of our inventory may ultimately prove to be unsalable or unsalable at its carrying cost. Reserves are established to effectively adjust the carrying value of such inventory to net realizable value. To determine the appropriate level of valuation reserves, we evaluate current stock levels in relation to historical and expected patterns of demand for all of our products. We evaluate the need for changes to valuation reserves based on market conditions, competitive offerings and other factors on a regular basis.

 

Income Taxes – We account for income taxes and the related accounts under the asset and liability method.  Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which the temporary differences are expected to be recovered or settled. These deferred tax assets are reduced by a valuation allowance, which is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Our judgment regarding the realization of deferred tax assets may change due to future profitability and market conditions, changes in U.S. or foreign tax laws and other factors. These changes, if any, may require material adjustments to these deferred tax assets and an accompanying reduction or increase in net income in the period when such determinations are made.

 

25
 

  

The determination of our provision for income taxes requires judgment, the use of estimates and the interpretation and application of complex tax laws. Our provision for income taxes reflects a combination of income earned and taxed at the federal and state level in the U.S., as well as in various foreign jurisdictions. We have not provided for any U.S. income taxes on the undistributed earnings of our foreign subsidiaries based upon our determination that such earnings will be indefinitely reinvested abroad.  

 

In addition to the risks to the effective tax rate described above, the future effective tax rate reflected in forward-looking statements is based on currently effective tax laws. Significant changes in those laws could materially affect these estimates.

 

We recognize uncertain tax positions when it is more likely than not that the tax position will be sustained upon examination by relevant taxing authorities, based on the technical merits of the position. The amount recognized is measured as the largest amount of benefit that is greater than 50 percent likely of being realized upon ultimate settlement.

 

Impairment of Long Lived Assets – We are required periodically to review the recoverability of certain assets (property, plant and equipment, intangible assets, goodwill and other assets) based on projections of anticipated future cash flows, including future profitability assessments of various product lines. We estimate cash flows using internal budgets based on recent sales data.

 

Capitalized Software Development Costs – Costs incurred to develop computer software products and significant enhancements to software features of existing products are capitalized as required by FASB guidance relating to accounting for the costs of computer software to be sold, leased, or otherwise marketed, and amortized over the estimated product life of the related software. The determination as to when in the product development cycle technological feasibility has been established, and the expected product life, require judgments and estimates by management and can be affected by technological developments, innovations by competitors and changes in market conditions affecting demand. We periodically review the carrying values of these assets and make judgments as to ultimate realization considering the above-mentioned risk factors.

 

Derivative Financial Instruments – Critical aspects of our accounting policy for derivative financial instruments that we designate as hedging instruments include conditions that require that critical terms of a hedging instrument are essentially the same as a hedged forecasted transaction. Another important element of our policy demands that formal documentation be maintained as required by FASB guidance relating to accounting for derivative instruments and hedging activities. Failure to comply with these conditions would result in a requirement to recognize changes in market value of hedge instruments in earnings. We routinely monitor significant estimates, assumptions, and judgments associated with derivative instruments, and compliance with formal documentation requirements.

 

Stock Compensation – We account for share-based compensation according to FASB guidance relating to share-based payments, which requires the measurement and recognition of compensation expense for all share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

 

26
 

  

Item 7a. Quantitative and Qualitative Disclosures About Market Risk

 

Interest Rate Risk

 

Interest on borrowings under our bank credit agreements are tied to prevailing domestic and foreign interest rates. At October 31, 2014, we had $3.3 million of borrowings under our China credit facility. We had no other debt or borrowings under any of our other credit facilities.

 

Foreign Currency Exchange Risk

 

In fiscal 2014, we derived approximately 72% of our revenues from foreign markets. All of our computerized machine tools and computer control systems assembled in Taiwan, as well as certain proprietary service parts, are sourced by our U.S.-based engineering and manufacturing division and re-invoiced to our foreign sales and service subsidiaries, primarily in their functional currencies.

 

Our products are sourced from foreign suppliers or built to our specifications by either our wholly-owned subsidiaries in Taiwan, Italy and China or an affiliated contract manufacturer in Taiwan. Our purchases are predominantly in foreign currencies and in some cases our arrangements with these suppliers include foreign currency risk sharing agreements, which reduce (but do not eliminate) the effects of currency fluctuations on product costs. The predominant portion of the exchange rate risk associated with our product purchases relates to the New Taiwan Dollar and the Euro.

 

We enter into foreign currency forward exchange contracts from time to time to hedge the cash flow risk related to forecasted inter-company sales and purchases denominated in, or based on, foreign currencies (primarily the Euro, Pound Sterling, and New Taiwan Dollar). We also enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. We do not speculate in the financial markets and, therefore, do not enter into these contracts for trading purposes.

 

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2014, which are designated as cash flow hedges under FASB guidance related to accounting for derivative instruments and hedging activities, were as follows:

 

   Notional
Amount
   Weighted
Avg.
   Contract Amount at
Forward Rates in
U.S. Dollars
    
Forward
Contracts
  in Foreign
Currency
   Forward
Rate
   Contract
Date
   October 31,
2014
   Maturity Dates
                    
Sale Contracts:                       
Euro   21,400,000    1.3431   $28,742,590   $26,841,829   Nov 2014-Oct 2015
Sterling   7,035,000    1.6531   $11,629,823   $11,235,853   Nov 2014-Oct 2015
                        
Purchase Contracts:                       
New Taiwan Dollar   603,000,000    29.79*  $20,241,073   $19,839,508   Nov 2014-Oct 2015

 

*NT Dollars per U.S. Dollar

 

27
 

 

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2014, which were entered into to protect against the effects of foreign currency fluctuations on receivables and payables and are not designated as hedges under this guidance denominated in foreign currencies, were as follows:

 

   Notional
Amount
   Weighted
Avg.
   Contract Amount at 
Forward Rates in
U.S. Dollars
    
Forward
Contracts
  in Foreign
Currency
   Forward
Rate
   Contract
Date
   October 31,
2014
   Maturity Dates
                    
Sale Contracts:                       
Euro   23,516,799    1.2740   $29,959,825   $29,485,577   Nov 2014–Apr 2015
Pound Sterling   1,459,844    1.5999   $2,335,584   $2,334,381           Nov 2014
Canadian Dollar   1,014,622    0.8917   $904,738   $895,824           Apr 2015
South African Rand   8,901,628    0.0890   $792,639   $781,209           Apr 2015
                        
Purchase Contracts:                       
New Taiwan Dollar   706,669,915    30.08*  $23,491,997   $23,194,334   Nov 2014–Jan 2015

 

* NT Dollars per U.S. Dollar

 

We are exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract with a notional amount of €3.0 million. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The hedging guidance requires all changes in the fair value of the contract to be reported as a cumulative translation adjustment in Accumulated Other Comprehensive Loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured in November 2013 and we entered into a new forward contract for the same notional amount that is set to mature in November 2014. As of October 31, 2014, we had a realized gain of $238,000 and an unrealized gain of $194,000, net of tax, recorded as cumulative translation adjustments in Accumulated Other Comprehensive Loss, related to these forward contracts.

 

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2014, which are designated as net investment hedges under this guidance were as follows:

 

   Notional
Amount
   Weighted
Avg.
   Contract Amount at 
Forward Rates in 
U.S. Dollars
    
Forward Contracts  in Foreign
Currency
   Forward
Rate
   Contract
Date
   October 31,
2014
   Maturity Date
                    
Sale Contracts:                       
Euro   3,000,000    1.3533   $4,059,900   $3,758,790   Nov 2014

 

28
 

 

Management’s Annual Report on Internal Control Over Financial Reporting

 

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.:

 

Management of Hurco Companies, Inc. (the “Company”), has assessed the effectiveness of the Company’s internal control over financial reporting as of October 31, 2014, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 framework) (COSO). Management is responsible for these financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting.

 

Because of its inherent limitations, the Company’s internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In management’s opinion, the Company’s internal control over financial reporting as of October 31, 2014, was effective based on the criteria specified above.

 

Our independent registered accounting firm, Ernst & Young LLP, who also audited our consolidated financial statements, audited the effectiveness of our internal control over financial reporting as of October 31, 2014. Ernst & Young has issued their attestation report, which is included in Part II, Item 8 of this Annual Report on Form 10-K.

 

/s/ Michael Doar  
Michael Doar,  
Chairman of the Board and Chief Executive Officer  
   
/s/ Sonja K. McClelland  
Sonja K. McClelland  
Vice President, Secretary, Treasurer and Chief Financial Officer  

 

Indianapolis, Indiana

January 9, 2015

 

29
 

 

 

Item 8.              FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

Report of Independent Registered Public Accounting Firm

 

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

 

We have audited the accompanying consolidated balance sheets of Hurco Companies, Inc. as of October 31, 2014 and 2013 and the related consolidated statements of income, comprehensive income, changes in shareholders’ equity and cash flows for each of the three years in the period ended October 31, 2014. Our audits also included the financial statement schedule listed at Item 15(a)(2). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Hurco Companies, Inc. at October 31, 2014 and 2013 and the consolidated results of its operations and its cash flows for each of the three years in the period ended October 31, 2014 in conformity with U.S. Generally Accepted Accounting Principles. Also, in our opinion, the related financial statement schedule when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2014, based on criteria established in Internal Control – Integrated Framework issued by the Commission of Sponsoring Organizations of the Treadway Commission (1992 framework) and our report dated January 9, 2015 expressed an unqualified opinion thereon.

 

/s/ Ernst & Young LLP

 

Indianapolis, Indiana

January 9, 2015

  

30
 

 

Report of Independent Registered Public Accounting Firm

 

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

 

We have audited Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2014, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 Framework) (the COSO criteria). Hurco Companies, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or, disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, Hurco Companies, Inc. maintained, in all material respects, effective internal control over financial reporting as of October 31, 2014, based on the COSO criteria.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Hurco Companies, Inc. as of October 31, 2014 and 2013 and the related consolidated statements of income, comprehensive income, changes in shareholders’ equity and cash flows for each of the three years in the period ended October 31, 2014 of Hurco Companies, Inc. and our report dated January 9, 2015 expressed an unqualified opinion thereon.

 

/s/ Ernst & Young LLP

 

Indianapolis, Indiana

January 9, 2015

 

31
 

 

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF INCOME

 

   Year Ended October 31, 
   2014   2013   2012 
   (In thousands, except share and per share amounts) 
Sales and service fees  $222,303   $192,804   $203,117 
Cost of sales and service   153,691    137,748    139,936 
Gross profit   68,612    55,056    63,181 
Selling, general and administrative expenses   46,615    41,413    41,160 
Operating income   21,997    13,643    22,021 
Interest expense   264    280    168 
Interest income   78    74    69 
Investment income   42    21    7 
Income from equity investments   444    228    276 
Other expense, net   936    1,244    341 
Income before income taxes   21,361    12,442    21,864 
Provision for income taxes   6,218    4,252    6,226 
Net income  $15,143   $8,190   $15,638 
                
Income per common share – basic  $2.31   $1.26   $2.41 
Weighted average common shares outstanding – basic   6,497    6,455    6,445 
Income per common share – diluted  $2.30   $1.25   $2.40 
Weighted average common shares outstanding – diluted   6,538    6,497    6,470 
                
Dividends paid per share  $.26   $.10     

 

The accompanying notes are an integral part of the consolidated financial statements.

 

32
 

 

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

 

   Year Ended October 31, 
   2014   2013   2012 
   (In thousands) 
Net Income  $15,143   $8,190   $15,638 
Other comprehensive income (loss):               
Translation gain (loss) of foreign currency financial statements   (3,535)   892    (838)
(Gain) / loss on derivative instruments reclassified into operations, net of tax $621, $(599), and $63, respectively   1,129    (1,091)   109 
Gain / (loss) on derivative instruments, net of tax $458, $(512), and $1,076, respectively   830    (932)   1,870 
Total other comprehensive income (loss)   (1,576)   (1,131)   1,141 
Comprehensive income  $13,567   $7,059   $16,779 

 

The accompanying notes are an integral part of the consolidated financial statements.

33
 

 

HURCO COMPANIES, INC.

CONSOLIDATED BALANCE SHEETS

 

   As of October 31, 
   2014   2013 
   (In thousands, except share and per share data) 
ASSETS          
Current assets:          
Cash and cash equivalents  $53,846   $42,804 
Accounts receivable, less allowance for doubtful accounts of  $878 in 2014 and $540 in 2013   45,435    36,145 
Inventories, net   95,992    95,260 
Deferred income taxes   2,062    2,080 
Derivative assets   3,127    699 
Prepaid assets   8,927    6,584 
Other   1,365    1,430 
Total current assets   210,754    185,002 
Property and equipment:          
Land   782    782 
Building   7,314    7,326 
Machinery and equipment   19,432    19,059 
Leasehold improvements   3,523    3,634 
    31,051    30,801 
Less accumulated depreciation and amortization   (19,546)   (18,502)
    11,505    12,299 
Software development costs, less accumulated amortization   3,519    3,714 
Goodwill   2,606    2,807 
Intangible assets, net   1,635    2,155 
Investments and other assets, net   6,912    5,258 
   $236,931   $211,235 
           
LIABILITIES AND SHAREHOLDERS’ EQUITY          
Current liabilities:          
Accounts payable  $40,464   $34,262 
Accounts payable-related parties   2,254    1,265 
Accrued expenses and other   18,060    13,504 
Accrued warranty expenses   2,048    1,778 
Derivative liabilities   705    1,212 
Short-term debt   3,272    3,665 
Total current liabilities   66,803    55,686 
           
Non-current liabilities:          
Deferred income taxes   993    743 
Accrued tax liability   1,054    1,103 
Deferred credits and other   3,436    2,212 
    5,483    4,058 
          
Shareholders’ equity:          
Preferred stock: no par value per share, 1,000,000 shares authorized, no shares issued        
Common stock: no par value, $.10 stated value per share, 12,500,000 shares authorized, 6,589,918 and 6,533,510 shares issued; and 6,508,880 and 6,465,054 shares outstanding, as of October 31, 2014 and October 31, 2013, respectively   651    647 
Additional paid-in capital   55,974    54,698 
Retained earnings   111,580    98,130 
Accumulated other comprehensive loss   (3,560)   (1,984)
Total shareholders’ equity   164,645    151,491 
   $236,931   $211,235 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

34
 

 

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

 

   Year Ended October 31, 
   2014   2013   2012 
   (In thousands) 
Cash flows from operating activities:               
Net income  $15,143   $8,190   $15,638 
Adjustments to reconcile net income to net cash provided by (used for) operating activities,  net of acquisitions:               
Provision for doubtful accounts   338    32    (224)
Deferred income taxes   874    (909)   1,846 
Equity in income of affiliates   (444)   (228)   (276)
Foreign currency (gain) loss   (1,482)   (1,811)   3,003 
Unrealized (gain) loss on derivatives   208    (477)   522 
Depreciation and amortization   3,309    3,392    4,126 
Stock-based compensation   921    979    870 
Change in assets and liabilities, net of acquisitions:               
(Increase) decrease in accounts receivable   (11,653)   4,660    (8,662)
(Increase) decrease in inventories   (4,971)   (1,020)   (10,152)
(Increase) decrease in prepaid expenses   (2,343)   138    (2,263)
Increase (decrease) in accounts payable   8,642    1,768    (9,594)
Increase (decrease) in accrued expenses   5,257    (1,885)   343 
Net change in derivative assets and liabilities   (741)   (485)   68 
Other   3,277    2,041    (2,232)
Net cash provided by (used for) operating activities   16,335    14,385    (6,987)
                
Cash flows from investing activities:               
Proceeds from sale of property and equipment   125    2    1 
Purchase of property and equipment   (1,680)   (1,424)   (2,755)
Software development costs   (955)   (956)   (977)
Other investments   (76)   (256)   (42)
Acquisition of business, net of cash acquired       (380)    
Net cash used for investing activities   (2,586)   (3,014)   (3,773)
                
Cash flows from financing activities:               
Proceeds from exercise of common stock options   357    302    1 
Dividends paid   (1,693)   (646)    
Restricted shares vested   2    1     
Tax benefit from exercise of stock options       2     
Repayment on short-term debt   (379)   (4,271)    
Borrowings on short-term debt           2,293 
Net cash provided by (used for) financing activities   (1,713)   (4,612)   2,294 
                
Effect of exchange rate changes on cash and cash equivalents   (994)   275    (725)
Net increase (decrease) in cash and cash equivalents   11,042    7,034    (9,191)
                
Cash and cash equivalents at beginning of year   42,804    35,770    44,961 
                
Cash and cash equivalents at end of year  $53,846   $42,804   $35,770 
                
Supplemental disclosures:               
Cash paid for:               
Interest  $167   $176   $127 
Income taxes, net  $5,782   $2,537   $10,679 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

35
 

 

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY

 

(In thousands, except shares
outstanding)
  Common
Stock
Shares
Outstanding
   Common
Stock
Amount
   Additional
Paid-In
Capital
   Retained
Earnings
   Accumulated
Other
Comprehensive
Income (Loss)
   Total 
                 
Balances, October 31, 2011   6,440,851   $644   $52,614   $74,948   $(1,994)  $126,212 
                               
Net income               15,638        15,638 
                               
Other comprehensive loss                   1,141    1,141 
                               
Exercise of common stock options   500        1            1 
                               
Tax benefit from exercise of stock options           (69)           (69)
                               
Stock-based compensation expense   5,859    1    869            870 
                               
Balances, October 31, 2012   6,447,210   $645   $53,415   $90,586   $(853)  $143,793 
                               
Net income               8,190        8,190 
                               
Other comprehensive loss                   (1,131)   (1,131)
                               
Exercise of common stock options   11,369    1    302            303 
                               
Tax benefit from exercise of stock options           3            3 
                               
Stock-based compensation expense   6,475    1    978            979 
                               
Dividends paid               (646)       (646)
                               
Balances, October 31, 2013   6,465,054   $647   $54,698   $98,130   $(1,984)  $151,491 
                               
Net income               15,143        15,143 
                               
Other comprehensive loss                   (1,576)   (1,576)
                               
Exercise of common stock options   20,306    2    357            359 
                               
Stock-based compensation expense   23,520    2    919            921 
                               
Dividends paid               (1,693)       (1,693)
                               
Balances, October 31, 2014   6,508,880   $651   $55,974   $111,580   $(3,560)  $164,645 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

36
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

 

1.             SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

Consolidation. The consolidated financial statements include the accounts of Hurco Companies, Inc. (an Indiana corporation) and its wholly-owned subsidiaries. We have a 35% ownership interest in a Taiwan affiliate that is accounted for using the equity method. Our investment in that affiliate was approximately $3.1 million and $2.7 million as of October 31, 2014 and 2013, respectively. That investment is included in Investments and other assets, net on the accompanying Consolidated Balance Sheets. Intercompany accounts and transactions have been eliminated.

 

Statements of Cash Flows. We consider all highly liquid investments with a stated maturity at the date of purchase of three months or less to be cash equivalents. Cash flows from hedges are classified consistent with the items being hedged.

 

Translation of Foreign Currencies. All balance sheet accounts of non-U.S. subsidiaries are translated at the exchange rate as of the end of the year and translation adjustments of foreign currency balance sheets are recorded as a component of Accumulated other comprehensive loss in shareholders' equity. Income and expenses are translated at the average exchange rates during the year. Cumulative foreign currency translation adjustments, net of gains related to our net investment hedges, as of October 31, 2014 were a net loss of $4.6 million and are included in Accumulated other comprehensive loss. Foreign currency transaction gains and losses are recorded as income or expense as incurred and are recorded in Other expense, net.

 

Hedging. We are exposed to certain market risks relating to our ongoing business operations, including foreign currency risk, interest rate risk and credit risk. We manage our exposure to these and other market risks through regular operating and financing activities. Currently, the only risk that we manage through the use of derivative instruments is foreign currency risk.

 

We operate on a global basis and are exposed to the risk that our financial condition, results of operations and cash flows could be adversely affected by changes in foreign currency exchange rates. To reduce the potential effects of foreign exchange rate movements on our net equity investment in one of our foreign subsidiaries, and the gross profit and net earnings of certain of our foreign subsidiaries, we enter into derivative financial instruments in the form of foreign exchange forward contracts with a major financial institution. We are primarily exposed to foreign currency exchange rate risk with respect to transactions and net assets denominated in Euros, Pounds Sterling, Canadian Dollars, Indian Rupee, South African Rand, Singapore Dollars, Chinese Yuan, Polish Zloty, and New Taiwan Dollars.

 

We account for derivative instruments as either assets or liabilities and carry them at fair value. The accounting for changes in the fair value of a derivative depends on the intended use of the derivative and the resulting designation. For derivative instruments designated as a fair value hedge, the gain or loss is recognized in earnings in the period of change together with the offsetting loss or gain on the hedged item attributed to the risk being hedged. For a derivative instrument designated as a cash flow hedge, the effective portion of the derivative’s gain or loss is initially reported as a component of Accumulated other comprehensive loss in shareholders’ equity and subsequently reclassified into earnings when the hedged exposure affects earnings. The ineffective portion of the gain or loss is reported in earnings immediately. For derivative instruments that are not designated as accounting hedges under the Derivatives and Hedging Topic of the Financial Accounting Standards Board (FASB guidance), changes in fair value are recognized in earnings in the period of change. We do not hold or issue derivative financial instruments for speculative trading purposes. We only enter into derivatives with one counterparty, which is among one of the largest U.S. banks ranked by assets, in order to minimize credit risk and, to date, that counterparty has not failed to meet its financial obligations under such contracts.

 

37
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

Derivatives Designated as Hedging Instruments

 

We enter into foreign currency forward exchange contracts periodically to hedge certain forecasted inter-company sales and purchases denominated in foreign currencies (the Pound Sterling, Euro and New Taiwan Dollar). The purpose of these instruments is to mitigate the risk that the U.S. Dollar net cash inflows and outflows resulting from sales and purchases denominated in foreign currencies will be adversely affected by changes in exchange rates. These forward contracts have been designated as cash flow hedge instruments, and are recorded in the Consolidated Balance Sheets at fair value in Derivative assets and Derivative liabilities. The effective portion of the gains and losses resulting from the changes in the fair value of these hedge contracts are deferred in Accumulated other comprehensive loss and recognized as an adjustment to Cost of sales and service in the period that the corresponding inventory sold that is the subject of the related hedge contract is recognized, thereby providing an offsetting economic impact against the corresponding change in the U.S. Dollar value of the inter-company sale or purchase being hedged. The ineffective portion of gains and losses resulting from the changes in the fair value of these hedge contracts is reported in Other expense, net immediately. We perform quarterly assessments of hedge effectiveness by verifying and documenting the critical terms of the hedge instrument and determining that forecasted transactions have not changed significantly. We also assess on a quarterly basis whether there have been adverse developments regarding the risk of a counterparty default.

 

We had forward contracts outstanding as of October 31, 2014, in Euros, Pounds Sterling and New Taiwan Dollars with set maturity dates ranging from November 2014 through October 2015. The contract amount at forward rates in U.S. Dollars at October 31, 2014 for Euros and Pounds Sterling was $26.8 million and $11.2 million, respectively. The contract amount at forward rates in U.S. Dollars for New Taiwan Dollars was $19.8 million at October 31, 2014. At October 31, 2014, we had approximately $991,000 of gains, net of tax, related to cash flow hedges deferred in Accumulated other comprehensive loss. Of this amount, $1.2 million represented unrealized gains, net of tax, related to cash flow hedge instruments that remain subject to currency fluctuation risk. The majority of these deferred losses will be recorded as an adjustment to Cost of sales and service in periods through October 2015, in which the corresponding inventory that is the subject of the related hedge contract is sold, as described above.

 

We are exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract with a notional amount of €3.0 million in November 2013. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The forward method requires all changes in the fair value of the contract to be reported as a cumulative translation adjustment in Accumulated other comprehensive loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured in November 2014 and we entered into a new forward contract for the same notional amount that is set to mature in November 2015. As of October 31, 2014, we had a realized gain of $238,000 and an unrealized gain of $194,000, net of tax, recorded as cumulative translation adjustments in Accumulated other comprehensive loss, related to these forward contracts.

 

Derivatives Not Designated as Hedging Instruments

 

We enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. These derivative instruments are not designated as hedges under FASB guidance and, as a result, changes in their fair value are reported currently as Other expense, net in the Consolidated Statements of Income consistent with the transaction gain or loss on the related receivables and payables denominated in foreign currencies.

 

38
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

We had forward contracts outstanding as of October 31, 2014, in Euros, Pounds Sterling, Canadian Dollars, South African Rand, and New Taiwan Dollars with set maturity dates ranging from November 2014 through April 2015. The contract amounts at forward rates in U.S. Dollars at October 31, 2014 for Euros, Pounds Sterling, Canadian Dollars, and South African Rand totaled $33.5 million. The contract amount at forward rates in U.S. Dollars for New Taiwan Dollars was $23.2 million at October 31, 2014.

 

Fair Value of Derivative Instruments

 

We recognize the fair value of derivative instruments as assets and liabilities on a gross basis on our Consolidated Balance Sheets. As of October 31, 2014 and October 31, 2013, all derivative instruments were recorded at fair value on the balance sheets as follows (in thousands):

 

   2014  2013
   Balance Sheet  Fair   Balance Sheet  Fair 
Derivatives  Location  Value   Location  Value 
               
Designated as Hedging Instruments:                
Foreign exchange forward contracts  Derivative assets  $2,596   Derivative assets  $244 
Foreign exchange forward contracts  Derivative liabilities  $401   Derivative liabilities  $1,158 
                 
Not Designated as Hedging Instruments:                
Foreign exchange forward contracts  Derivative assets  $531   Derivative assets  $455 
Foreign exchange forward contracts  Derivative liabilities  $304   Derivative liabilities  $54 

 

Effect of Derivative Instruments on the Consolidated Balance Sheets, Statements of Changes in Shareholders’ Equity and Statements of Income

 

Derivative instruments had the following effects on our Consolidated Balance Sheets, Statements of Changes in Shareholders’ Equity and Statements of Income, net of tax, during the fiscal years ended October 31, 2014 and 2013 (in thousands):

 

Derivatives  Amount of Gain (Loss)
Recognized in Other
Comprehensive Income
   Location of Gain
(Loss) Reclassified
from Other
Comprehensive
Income
  Amount of Gain (Loss)
Reclassified from Other
Comprehensive Income
 
   2014   2013      2014   2013 
Designated as Hedging Instruments:                       
(Effective Portion)                       
                        
Foreign exchange forward contracts
– Intercompany sales/purchases
  $830   $(932)  Cost of sales and service  $(1,129)  $1,091 
                        
Foreign exchange forward contract
– Net Investment
  $207   $(112)             

 

39
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

We recognized a gain of $16,000 during the fiscal year ended October 31, 2014 and a loss of $37,000 during the fiscal year ended October 31, 2013 as a result of contracts closed early that were deemed ineffective for financial reporting purposes and did not qualify as cash flow hedges.

 

Derivatives  Location of Gain (Loss) 
Recognized in Operations
  Amount of Gain (Loss)
Recognized in Operations
 
      2014   2013 
      (in thousands) 
Not Designated as Hedging Instruments:             
Foreign exchange forward contracts  Other income (expense)  $1,657   $(1,786)

 

The following table presents the changes in the components of Accumulated other comprehensive loss, net of tax, for the fiscal years ended October 31, 2014 and 2013 (in thousands):

 

   Foreign
Currency
Translation
   Cash Flow
Hedges
   Total 
             
Balance, October 31, 2012  $(1,908)  $1,055   $(853)
Other comprehensive income (loss) before reclassifications   892    (932)   (40)
Reclassifications       (1,091)   (1,091)
Balance, October 31, 2013   (1,016)   (968)   (1,984)
Other comprehensive income (loss) before reclassifications   (3,535)   830    (2,705)
Reclassifications       1,129    1,129 
Balance, October 31, 2014  $(4,551)  $991   $(3,560)

 

Inventories. Inventories are stated at the lower of cost or market, with cost determined using the first-in, first-out method. Provisions are made to reduce excess or obsolete inventories to their estimated realizable value.

 

Property and Equipment. Property and equipment are carried at cost. Depreciation and amortization of assets are provided primarily under the straight-line method over the shorter of the estimated useful lives or the lease terms as follows:

 

  Number of Years
Land Indefinite
Building 40
Machines 7 – 10
Shop and office equipment 3 – 7
Leasehold improvements 3 – 40

 

Total depreciation and amortization expense recognized for property and equipment for the fiscal years ended October 31, 2014, 2013 and 2012 was $2.2 million, $2.2 million, and $2.2 million, respectively.

 

40
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

Revenue Recognition. We recognize revenue from sales of our machine tool systems upon delivery of the product to the customer, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. In certain foreign locations, we retain title after shipment under a “retention of title” clause solely to protect collectability. The retention of title is similar to Uniform Commercial Code (UCC) filings in the United States and provides the creditor with additional rights to the machine if the customer fails to pay. Revenue recognition at the time of shipment is appropriate in this as all risks of ownership have passed to the buyer and collectability is reasonably assured and protected under the “retention of title” clause. Our computerized machine tools are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon contractual customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications.

 

Depending upon geographic location, after shipment, a machine may be installed at the customer’s facilities by a distributor, independent contractor or by one of our service technicians. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process to be inconsequential and perfunctory.

 

Service fees from maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract.

 

Allowance for Doubtful Accounts. The allowance for doubtful accounts is based on our best estimate of probable credit issues and historical experience. We perform credit evaluations of the financial condition of our customers. No collateral is required for sales made on open account terms. Concentrations of credit risk with respect to accounts receivable are limited due to the large number of customers comprising our customer base. We consider trade accounts receivable to be past due when payment is not made by the due date as specified on the customer invoice, and charge off uncollectible balances when all reasonable collection efforts have been exhausted.

 

Software Revenue Recognition. Sales related to software products are recognized when shipped in conformity with FASB guidance related to software revenue recognition that requires at the time of shipment, persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. The software does not require production, modification or customization.

 

Product Warranty. Expected future product warranty claims are recorded to expense when the product is sold. Product warranty estimates are established using historical information about the nature, frequency, and average cost of warranty claims. Warranty claims are influenced by factors such as new product introductions, technological developments, the competitive environment, and the costs of component parts. Actual payments for warranty claims could differ from the amounts estimated requiring adjustments to the liabilities in future periods. See Note 12 of Notes to Consolidated Financial Statements for further discussion of warranties.

 

Research and Development Costs. The costs associated with research and development programs for new products and significant product improvements, other than software development costs which are eligible for capitalization per FASB guidance, are expensed as incurred and are included in Selling, general and administrative expenses. Research and development expenses totaled $3.4 million, $3.0 million, and $2.6 million, in fiscal 2014, 2013, and 2012, respectively.

 

41
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

Software Development Costs. Costs incurred to develop computer software products and significant enhancements to software features of existing products to be sold or otherwise marketed are capitalized, after technological feasibility is established. Software development costs are amortized on a straight-line basis over the estimated product life of the related software, which ranges from three to five years. We capitalized costs of $1.0 million in fiscal 2014, $1.0 million in fiscal 2013, and $1.0 million in fiscal 2012 related to software development projects. Amortization expense for software development costs was $1.2 million, $1.2 million, and $1.9 million, for the fiscal years ended October 31, 2014, 2013, and 2012, respectively. Accumulated amortization at October 31, 2014 and 2013 was $14.3 million and $13.1 million, respectively. Estimated amortization expense for the existing amortizable intangible assets for the fiscal years ending October 31, is as follows (in thousands):

 

Fiscal Year  Amortization
Expense
 
2015  $1,050 
2016   800 
2017   575 
2018   525 
2019   425 

  

Goodwill and Intangible Assets. Goodwill and other separately recognized intangible assets with indefinite lives are not subject to amortization. At least once annually or when indicators of impairment exist, we perform an impairment test for goodwill. Goodwill is allocated to various reporting units. We utilize a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step we compare the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows (income approach), and by using a market approach based upon an analysis of valuation metrics of comparable peer companies. If the carrying amount exceeds the fair value, we perform the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, we compare the carrying amount of the goodwill to the implied fair value of the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value. For other separately recognized intangible assets with indefinite lives, we use a qualitative approach to test such assets for impairment if certain conditions are met. Intangible assets that are determined to have a finite life are amortized over their estimated useful lives and are also subject to review for impairment, if indicators of impairment are identified. The changes in the carrying amounts of goodwill for the years ended October 31, 2014 and 2013 were as follows (in thousands):

 

Balance as of October 31, 2013  $2,807 
Impact of foreign currency translation   (201)
Balance as of October 31, 2014  $2,606 

 

42
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

As of October 31, 2014, the balances of intangible assets, other than goodwill, were as follows (in thousands):

 

   Weighted
Average
Amortization
Period
   Gross
Intangible
Assets
   Accumulated
Amortization
   Net Intangible
Assets
 
Tradenames and trademarks   13 years   $263   $(27)  $236 
Tradenames and trademarks   indefinite    60        60 
Customer relationships   15 years    260    (81)   179 
Technology   13 years    766    (78)   688 
Patents   6 years    2,972    (2,632)   340 
Other   8 years    383    (251)   132 
Total       $4,704   $(3,069)  $1,635 

 

As of October 31, 2013, the balances of intangible assets, other than goodwill, were as follows (in thousands):

 

   Weighted
Average
Amortization
Period
   Gross
Intangible
Assets
   Accumulated
Amortization
   Net Intangible
Assets
 
Tradenames and trademarks   

 13 years

   $285   $(7)  $278 
Tradenames and trademarks   indefinite    60        60 
Customer relationships   15 years    264    (64)   200 
Technology   13 years    831    (21)   810 
Patents   6 years    2,973    (2,363)   610 
Other   8 years    399    (202)   197 
Total       $4,812   $(2,657)  $2,155 

 

Intangible asset amortization expense was $412,000, $342,000, and $423,000 for fiscal 2014, 2013 and 2012, respectively. Annual intangible asset amortization expense for the next five fiscal years is estimated to be $231,000 in 2015; $148,000 in 2016; $126,000 in 2017; $126,000 in 2018 and $126,000 in 2019.

 

Impairment of Long-Lived Assets. We periodically evaluate the carrying value of long-lived assets to be held and used, including property and equipment, software development costs and intangible assets, including goodwill, when events or circumstances warrant such a review. The carrying value of a long-lived asset (or group of assets) to be held and used is considered impaired when the anticipated separately identifiable undiscounted cash flows from such an asset (or group of assets) are less than the carrying value of the asset (or group of assets) in accordance with FASB guidance related to accounting for the impairment or disposal of long-lived assets.

 

43
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

Earnings Per Share. Basic earnings per share is calculated by dividing net income by the weighted-average number of common shares actually outstanding during the period. Diluted earnings per share assumes the issuance of additional shares of common stock upon exercise of all outstanding stock options and contingently issuable securities if the effect is dilutive, in accordance with the treasury stock method discussed in FASB issued guidance on “Earnings Per Share”. The following table presents a reconciliation of our basic and diluted earnings per share computation:

 

   Fiscal Year Ended October 31, 
   2014   2013   2012 
(in thousands, except per share amount)  Basic   Diluted   Basic   Diluted   Basic   Diluted 
 Net income  $15,143   $15,143   $8,190   $8,190   $15,638   $15,638 
Undistributed earnings  allocated to participating shares   (121)   (121)   (86)   (86)   (134)   (134)
Net income applicable to common shareholders  $15,022   $15,022   $8,104   $8,104   $15,504   $15,504 
Weighted average shares  outstanding   6,497    6,497    6,455    6,455    6,445    6,445 
Stock options       41        42        25 
    6,497    6,538    6,455    6,497    6,445    6,470 
Income per share  $2.31   $2.30   $1.26   $1.25   $2.41   $2.40 

 

Income Taxes. We account for income taxes and the related accounts under the asset and liability method. Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which the temporary differences are expected to be recovered or settled. These deferred tax assets are reduced by a valuation allowance, which is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Our judgment regarding the realization of deferred tax assets may change due to future profitability and market conditions, changes in U.S. or foreign tax laws and other factors. These changes, if any, may require material adjustments to these deferred tax assets and an accompanying reduction or increase in net income in the period when such determinations are made.

 

The determination of our provision for income taxes requires judgment, the use of estimates and the interpretation and application of complex tax laws. Our provision for income taxes reflects a combination of income earned and taxed at the federal and state level in the U.S., as well as in various foreign jurisdictions. We have not provided for any U.S. income taxes on the undistributed earnings of our foreign subsidiaries based upon our determination that such earnings will be indefinitely reinvested abroad.  

 

In addition to the risks to the effective tax rate described above, the future effective tax rate reflected in forward-looking statements is based on currently effective tax laws. Significant changes in those laws could materially affect these estimates.

 

We recognize uncertain tax positions when it is more likely than not that the tax position will be sustained upon examination by relevant taxing authorities, based on the technical merits of the position. The amount recognized is measured as the largest amount of benefit that is greater than 50 percent likely of being realized upon ultimate settlement.

 

Stock Compensation. We account for share-based compensation according to FASB guidance relating to share based payments, which requires the measurement and recognition of compensation expense for all

share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

 

44
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

Estimates. The preparation of financial statements in conformity with U.S. Generally Accepted Accounting Principles requires us to make estimates and assumptions that affect the reported amounts presented and disclosed in our consolidated financial statements. Significant estimates and assumptions in these consolidated financial statements require the exercise of judgment and are used for, but not limited to, allowance for doubtful accounts, estimates of future cash flows and other assumptions associated with goodwill, intangible and long-lived asset impairment tests, useful lives for depreciation and amortization, warranty programs, stock compensation, income taxes and deferred tax valuation allowances, and contingencies. Due to the inherent uncertainty involved in making estimates, actual results reported in future periods may be different from these estimates.

 

2.BUSINESS OPERATIONS

 

Nature of Business. We design and manufacture computer control systems, software, and computerized machine tools and related components and accessories for machine tools for sale to the worldwide machine tool industry. The machine tool industry is highly cyclical and declines in demand can and will occur abruptly in the geographic markets we serve.

 

The end market for our products consists primarily of precision tool, die and mold manufacturers, independent job shops, and specialized short-run production applications within large manufacturing operations. Industries served include: aerospace, defense, medical equipment, energy, automotive/transportation, electronics and computer industries. Our products are sold through independent agents and distributors throughout North America, Europe and Asia. We also have our own direct sales and service organizations in China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom, and certain areas of the United States.

 

Credit Risk. We sell products to customers located throughout the world. We perform ongoing credit evaluations of customers and generally do not require collateral. Allowances are maintained for potential credit losses. Concentration of credit risk with respect to trade accounts receivable is limited due to the large number of customers and their dispersion across many geographic areas. Although a significant amount of trade receivables are with distributors primarily located in the United States, no single distributor or region represents a significant concentration of credit risk.

 

Manufacturing Risk. At present, our wholly-owned subsidiaries, Hurco Manufacturing Limited (HML) and Ningbo Hurco Manufacturing Limited (NHML), produce the vast majority of our machine tools. In addition, we manufacture electro-mechanical components and accessories for machine tools through our wholly-owned subsidiary, LCM Precision Technology S.r.l. (LCM). HML, NHML and LCM manufacture their products in Taiwan, China, and Italy, respectively. Any interruption in manufacturing at any of these locations would have an adverse effect on our financial operating results. Interruption in manufacturing at one of these locations could result from a change in the political environment or a natural disaster, such as an earthquake, typhoon, or tsunami. Any interruption with one of our key suppliers may also have an adverse effect on our operating results and our financial condition.

 

3.INVENTORIES

 

Inventories as of October 31, 2014 and 2013 are summarized below (in thousands):

 

   2014   2013 
Purchased parts and sub-assemblies  $21,703   $21,647 
Work-in-process   14,236    15,996 
Finished goods   60,053    57,617 
   $95,992   $95,260 

 

Finished goods inventory consigned to our distributors and agents throughout North America, Europe and Asia was $6.2 million and $6.1 million as of October 31, 2014 and 2013, respectively.

 

45
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

4.ACQUISITION OF BUSINESS

 

On July 1, 2013, we acquired the machine tool component business of an Italian designer and manufacturer of electro-mechanical components and accessories for machine tools. We are operating this business through our wholly-owned Italian subsidiary, LCM. The purchase price for the acquired assets and the assumed liabilities was $5.0 million. The allocation of the opening balance sheet of LCM as of July 1, 2013 is as follows (in thousands):

 

Current Assets  $6,723 
Property plant and equipment   933 
Intangibles   1,437 
Goodwill   2,477 
Total assets  $11,570 
      
Current Liabilities  $4,821 
Short term debt   4,643 
Non-current liabilities   1,726 
Total liabilities  $11,190 
      
Cash expended, net of cash acquired   380 
Indebtedness assumed   4,643 
Total purchase price  $5,023 

 

Intangible assets of $1.4 million were recorded as a result of the purchase of the LCM assets. The fair value of the intangible assets was based upon a discounted cash flow method that involves inputs that are not observable in the market (Level 3). Intangible assets are amortized primarily using a straight-line methodology. The intangible assets consisted of the following (in thousands):

 

       Remaining
Economic
Useful Life
        
Trademark/name  $274   13 years
Technology and manufacturing know how   1,111   13 years
Customer relationships   52   16 years
   $1,437    

 

The excess purchase price over the fair value of the assets acquired and the liabilities assumed was recorded as goodwill in the amount of $2.5 million. Goodwill recognized in the acquisition relates primarily to advancing our machine tool technology and expanding our current product offering. The amount recorded as goodwill will be fully deductible for tax purposes.

 

The results of operations of LCM have been included in the consolidated financial statements from the date of acquisition. We incurred various costs related to the purchase of the LCM assets, including professional fees for due diligence, legal fees and accounting services. These costs totaled approximately $675,000 for the fiscal year ending October 31, 2013, and were recorded as Selling, general and administrative expenses in the Consolidated Statements of Income.

 

46
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

5.CREDIT AGREEMENTS AND BORROWINGS

 

At October 31, 2012, we were party to a credit agreement that provided us with a $15.0 million revolving credit facility and maximum outstanding letters of credit of $3.0 million. Borrowings under this agreement could have been used for general corporate purposes and bore interest at a floating rate, based either on LIBOR or the prime rate, plus an applicable margin.  The agreement contained financial covenants, including restrictions on incurring additional debt, making acquisitions, or paying dividends if we report a cumulative net loss for four consecutive quarters.

 

On December 7, 2012, we entered into an agreement (the “U.S. credit agreement”) with a financial institution that provided us with a $12.5 million unsecured revolving credit and letter of credit facility. The U.S. credit agreement permitted the issuance of up to $3.0 million in letters of credit. On May 9, 2014, the maximum amount for outstanding letters of credit under our U.S. credit agreement was increased from $3.0 million to $5.0 million in order to guarantee a new revolving credit facility in Taiwan.

 

On December 5, 2014, we amended our U.S. credit agreement to increase the cash dividend allowance from $3.0 million per calendar year to $4.0 million per calendar year and to extend the scheduled maturity date to December 7, 2016.

 

Borrowings under the U.S. credit agreement bear interest at a LIBOR-based rate or a floating rate of 1% above the prevailing prime rate. The floating rate will not less than the greatest of (a) a one month LIBOR-based rate plus 1.00% per annum, (b) the federal funds effective rate plus 0.50% per annum, and (c) the prevailing prime rate. The rate we must pay for that portion of the U.S. credit agreement which is not utilized is 0.05% per annum.

 

The U.S. credit agreement contains customary financial covenants, including a covenant that permits us to make investments in subsidiaries of up to $5.0 million and a minimum working capital of $90.0 million and a minimum tangible net worth of $120.0 million. The U.S. credit agreement permits us to pay cash dividends in an amount not to exceed $4.0 million per calendar year, so long as we are not in default before and after giving effect to such dividends.  

 

We have a £1.0 million revolving credit facility in the United Kingdom and a €1.5 million revolving credit facility in Germany. On May 12, 2014, we established a Taiwan credit facility in the amount of 100.0 million New Taiwan Dollars (approximately $3.3 million) with an expiration date of May 12, 2015. Our Taiwan credit facility is backed by letters of credit under our U.S. credit facility. We also have a 40.0 million Chinese Yuan (approximately $6.6 million) credit facility in China that will expire on February 24, 2015.

 

All of our credit facilities are unsecured.

 

At October 31, 2014, we had $3.3 million of borrowings under our China credit facility which bears interest at 5.6% annually (variable rate). We had no other debt or borrowings under any of our other credit facilities. At October 31, 2013, we had $3.3 million of borrowings outstanding under our credit facility in China and $383,000 of secured borrowings assumed in the LCM acquisition. At October 31, 2014, we were in compliance with all covenants contained in the related credit agreements and, as of that date, we had unutilized credit facilities of $18.7 million.

 

47
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

6.FINANCIAL INSTRUMENTS

 

Estimated Fair Value of Financial Instruments

 

The carrying amounts for cash and cash equivalents approximate their fair values due to the short maturity of these instruments and they meet the Level 1 criteria of the three-tier fair value hierarchy discussed below. The carrying amount of short-term debt approximates fair value due to the variable rate of the interest and the short term nature of the instrument. The fair value of Level 2 is based on an internally developed model using current interest rate data for similar issues as there is no active market for this type of instrument.

 

FASB fair value guidance established a three-tier fair value hierarchy, which categorizes the inputs used in measuring fair value.  These tiers include: Level 1, defined as observable inputs, such as quoted prices in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable; and Level 3, defined as unobservable inputs in which little or no market data exist, therefore requiring an entity to develop its own assumptions.

 

In accordance with this guidance, the following table represents the fair value hierarchy for our financial assets and liabilities measured at fair value as of October 31 (in thousands):

 

   Assets   Liabilities 
   October 31,   October 31,   October 31,   October 31, 
   2014   2013   2014   2013 
Level 1                    
Deferred compensation  $1,232   $1,073   $-   $- 
                     
Level 2                    
Derivatives  $3,127   $699   $705   $1,212 

 

Recurring Fair Value Measurements

 

Included in Level 1 assets are mutual fund investments under a nonqualified deferred compensation plan. We estimate the fair value of these investments on a recurring basis using market prices which are readily available.

 

Included as Level 2 fair value measurements are derivative assets and liabilities related to gains and losses on foreign currency forward exchange contracts entered into with a third party. We estimate the fair value of these derivatives on a recurring basis using foreign currency exchange rates obtained from active markets. Derivative instruments are reported in the accompanying consolidated financial statements at fair value. We have derivative financial instruments in the form of foreign currency forward exchange contracts as described in Note 1 of Notes to Consolidated Financial Statements in which the U.S. Dollar equivalent notional amount of these contracts was $122.2 million and $105.0 million at October 31, 2014 and 2013, respectively. The fair value of Derivative assets recorded on our Consolidated Balance Sheets at October 31, 2014 and 2013 was $3.1 million and $699,000, respectively. The fair value of Derivative liabilities recorded on our Consolidated Balance Sheets at October 31, 2014 and 2013 was $705,000 and $1.2 million, respectively.

 

The fair value of the foreign currency forward exchange contracts and the related currency positions are subject to offsetting market risk resulting from foreign currency exchange rate volatility. The counterparty to the forward exchange contract is a substantial and creditworthy financial institution. We do not consider either the risk of counterparty non-performance or the economic consequences of counterparty non-performance as material risks.

 

48
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

Nonrecurring Fair Value Measurements

 

Certain nonfinancial assets and liabilities are measured at fair value on a nonrecurring basis and are subject to fair value adjustments in certain circumstances, such as when there is evidence of impairment. Assets and liabilities acquired in business combinations are recorded at their fair value as of the date of acquisition. Refer to Note 4 for the fair values of assets acquired and liabilities assumed in connection with the LCM acquisition.

 

We review for goodwill impairment annually and whenever events or changes in circumstances indicate our carrying value may not be recoverable. The fair value of reporting units is determined using the income approach. The income approach focusses on the income-producing capability of an asset, measuring the current value of the asset by calculating the present value of its future economic benefits such as cash earnings, cost savings, corporate tax structure and product offerings. Value indications are developed by discounting expected cash flows to their present value at a rate of return that incorporates the risk-free rate for the use of funds, the expected rate of inflation and risks associated with the reporting unit. These assets would generally be classified within Level 3, in the event that we were required to measure and record such assets at fair value within the consolidated financial statements. See Note 1 for further information on goodwill.

 

We periodically evaluate the carrying value of long-lived assets to be held and used, including definite-lived and indefinite-lived intangible assets and property plant and equipment, when events or circumstances warrant such a review. Fair value is determined primarily using anticipated cash flows assumed by a market participant discounted at a rate commensurate with the risk involved and these assets would generally be classified within Level 3, in the event that we were required to measure and record such assets at fair value within the consolidated financial statements.

 

7.INCOME TAXES

 

In the fiscal years set forth below, the provision (benefit) for income taxes consisted of the following (in thousands):

 

   Year Ended October 31, 
   2014   2013   2012 
             
Current:               
U.S. taxes  $3,498   $737   $5,460 
Foreign taxes   3,594    2,606    2,612 
    7,092    3,343    8,072 
Deferred:               
U.S. taxes   (709)   855    (1,931)
Foreign taxes   (165)   54    85 
    (874)   909    (1,846)
   $6,218   $4,252   $6,226 

 

49
 

 

HURCO COMPANIES, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 
A comparison of income tax expense at the U.S. statutory rate of 35% to the Company’s effective tax rate is as follows:

 

   Year Ended October 31, 
   2014   2013   2012 
Income (Loss) before income taxes (in thousands):               
Domestic  $9,190   $4,524   $12,432 
Foreign   12,171    7,918    9,432 
Earnings (Loss) before taxes on income  $21,361   $12,442   $21,864 
Tax rates:               
U.S. statutory rate   35%   35%   35%
Effect of tax rate of international jurisdictions different than U.S. statutory rates   (6)%   (6)%   (6)%
Valuation allowance   0%   5%   1%
State taxes   0%   1%   1%
Tax Credits   (1)%   (3)%   (2)%
Other   1%   2%   (1)%
Effective tax rate   29%   34%   28%

 

We have not made any provision for U.S. income taxes on the undistributed earnings of our wholly-owned foreign subsidiaries based upon our determination that such earnings will be indefinitely reinvested.  Undistributed earnings of our wholly-owned foreign subsidiaries at October 31, 2014 were approximately $65.4 million. In the event these earnings are later distributed to the U.S., such distributions would likely result in additional U.S. tax that may be offset, at least in part, by associated foreign tax credits.

 

Deferred income taxes are determined based on the difference between the amounts used for financial reporting purposes and tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to reverse.  Deferred taxes are adjusted for changes in tax rates and tax laws when changes are enacted.  Valuation allowances are recorded to reduce deferred tax assets when it is more likely than not that a tax benefit will not be realized.

 

As of October 31, 2014, we had deferred tax assets established for accumulated net operating loss carryforwards of $1.1 million, primarily related to state and foreign jurisdictions.  We also have deferred tax assets for research and development tax credits. We have established a valuation allowance against some of these carryforwards due to the uncertainty of their full realization.  As of October 31, 2014 and 2013, the balance of this valuation allowance was $1.1 million and $1.2 million, respectively.

 

50
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

Significant components of our deferred tax assets and liabilities at October 31, 2014 and 2013 were as follows (in thousands):

 

   October 31, 
   2014   2013 
Deferred Tax Assets:          
Net derivative instruments  $   $411 
Accrued inventory reserves   1,015    1,002 
Accrued warranty expenses   397    154 
Compensation related expenses   1,613    1,572 
Unrealized exchange gain/loss   435     
Other accrued expenses   167    191 
Net operating loss and credit carryforwards   1,417    1,468 
Other   118    409 
    5,162    5,207 
Less: Valuation allowance on net operating loss and credit carryforwards   (1,225)   (1,199)
Deferred tax assets   3,937    4,008 
           
Deferred Tax Liabilities:          
Net derivative instruments   (537)    
Property and equipment and capitalized software development costs   (1,950)   (1,814)
Unrealized exchange gain/loss       (359)
Other   (381)   (498)
           
Net deferred tax assets  $1,069   $1,337 

 

As of October 31, 2014, we had deferred tax assets relating to net operating losses carryforwards for international and U.S. income tax purposes of $1.1 million, of which $1.0 million will expire within 5 years and $125,000 will expire between 5 and 20 years. We also had deferred tax assets relating to tax credits of $268,000 which will expire between 10 and 20 years. 

 

A reconciliation of the beginning and ending amount of unrecognized tax benefits, excluding the related accrual for interest or penalties, is as follows (in thousands):

 

   2014   2013   2012 
Balance, beginning of year  $1,284   $118   $244 
Additions based on tax positions related to the current year   5    1,217    5 
Additions (reductions) related to prior year tax positions   (4)   23    (131)
Reductions due to statute expiration       (74)    
Other   (89)        
                
Balance, end of year  $1,196   $1,284   $118 

 

The entire balance of the unrecognized tax benefits and related interest at October 31, 2014, if recognized, would favorably affect the effective tax rate in future periods.

 

We recognize accrued interest and penalties related to unrecognized tax benefits as components of our income tax provision.  As of October 31, 2014, the gross amount of interest accrued, reported in other liabilities, was approximately $10,000, which did not include the federal tax benefit of interest deductions. The statute of limitations with respect to unrecognized tax benefits will expire between July 2015 and July 2018.

 

51
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

Due to the uncertain and complex application of tax regulations, it is possible that the ultimate resolution of future audits may result in liabilities that could be different from this estimate.  In such case, we would record additional tax expense or tax benefit in the tax provision (benefit) or reclassify amounts on the consolidated balance sheets in the period in which the matter is effectively settled with the taxing authority.

 

We file income tax returns in the U.S. federal jurisdiction and various states, local, and non-U.S. jurisdictions. The Internal Revenue Service (IRS) finalized their audit of our federal income tax returns for fiscal years 2011 and 2012 with minimal adjustments. We have also been notified by the German taxing authority that they have finalized their audit for fiscal years 2009 to 2012 with minimal adjustments.

 

A summary of open tax years by major jurisdiction is presented below:

 

United States federal Fiscal 2011 through the current period
Indiana Fiscal 2008 through the current period
California Fiscal 2010 through the current period
Germany¹ Fiscal 2013 through the current period
Taiwan Fiscal 2011 through the current period

 

¹ Includes federal as well as state, provincial or similar local jurisdictions, as applicable.

 

8.          EMPLOYEE BENEFITS

 

We have defined contribution plans that include a majority of our employees, under which our matching contributions are primarily discretionary. The purpose of these plans is generally to provide additional financial security during retirement by providing employees with an incentive to save throughout their employment. Our contributions and related expense totaled $884,000, $787,000, and $459,000, for the fiscal years ended October 31, 2014, 2013 and 2012, respectively.

 

9.          STOCK-BASED COMPENSATION

 

In March 2008, we adopted the Hurco Companies, Inc. 2008 Equity Incentive Plan (the “2008 Plan”), which allows us to grant awards of stock options, Stock Appreciation Rights settled in stock (SARs), restricted shares, performance shares and performance units. The 2008 Plan replaced the 1997 Stock Option and Incentive Plan, which expired in March 2007. The Compensation Committee of the Board of Directors has authority to determine the officers, directors and key employees who will be granted awards; designate the number of shares subject to each award; determine the terms and conditions upon which awards will be granted; and prescribe the form and terms of award agreements. We have granted stock options under both plans which are currently outstanding, and restricted shares and performance shares under the 2008 Plan. No stock option may be exercised more than ten years after the date of grant or such shorter period as the Compensation Committee may determine at the date of grant. The total number of shares of our common stock that may be issued as awards under the 2008 Plan is 750,000. The market value of a share of our common stock, for purposes of the 2008 Plan, is the closing sale price as reported by the Nasdaq Global Select Market on the date in question or, if not a trading day, on the last preceding trading date.

 

During fiscal 2014, 2013 and 2012, we recorded approximately $921,000, $979,000 and $870,000, respectively, of stock-based compensation expense related to grants under the plans. As of October 31, 2014, there was an estimated $996,000 of total unrecognized stock-based compensation cost that we expect to recognize by the end of the first quarter of fiscal 2017.

 

During fiscal 2014, options to purchase 20,306 shares were exercised, resulting in cash proceeds of approximately $359,000.

 

52
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

On March 13, 2014, the Compensation Committee granted a total of 11,235 shares of restricted stock to our non-employee directors. The restricted stock vests in full one year from the date of grant provided the recipient remains on the board of directors through that date. The grant date fair value of the restricted stock was based on the closing sales price of our common stock on the grant date which was $24.92 per share.

 

On January 10, 2014, the Compensation Committee approved a long-term incentive compensation arrangement for our executive officers in the form of restricted shares and performance shares awarded under the 2008 Plan. The awards were 25% time-based vesting and 75% performance-based vesting. The three-year performance period is fiscal 2014 through fiscal 2016.

 

The Compensation Committee granted a total 12,182 shares of time-based restricted shares to our executive officers. The restricted shares vest in thirds over three years from the date of grant provided the recipient remains employed through that date. The grant date fair value of the restricted shares was based upon the closing sales price of our common stock on the date of grant which was $24.01 per share.

 

The Compensation Committee also granted a total target number of 16,948 performance shares to our executive officers designated as “Performance Shares –TSR”. The shares were weighted as 40% of the overall long-term incentive compensation arrangement and will vest and be paid based upon the total shareholder return of our common stock over a three-year period, relative to the total shareholder return of the companies in a specified peer group over that period. Participants will have the ability to earn between 50% of the target number of shares for achieving threshold performance and 200% of the target number of shares for achieving maximum performance. The fair value of the market-based performance shares was $26.43 per share and was calculated using the Monte Carlo approach.

 

The Compensation Committee also granted a total target number of 17,056 performance shares to our executive officers designated as “Performance Shares –ROIC”. These shares were weighted as 35% of the overall long-term incentive compensation arrangement and will vest and be paid based upon the achievement of pre-established goals related to our average return on invested capital over the three-year period. Participants will have the ability to earn between 50% of the target number of shares for achieving threshold performance and 200% of the target number of shares for achieving maximum performance. The grant date fair value of the ROIC performance shares was based on the closing sales price of our common stock on the grant date which was $24.01 per share.

 

During fiscal 2013, options to purchase 11,369 shares were exercised, resulting in cash proceeds of approximately $303,000.

 

On March 14, 2013, the Compensation Committee granted a total of 6,230 shares of restricted stock to our non-employee directors. The restricted stock vests in full one year from the date of grant provided the recipient remains on the board of directors through that date. The grant date fair value of the restricted stock is based on the closing sales price of our common stock on the grant date which was $28.08 per share.

 

On December 12, 2012, the Compensation Committee granted a total of 24,976 stock options under the 2008 Plan to our executive officers. The fair value of the options was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 62%, expected term of the options of five years, dividend yield rate of 0% and a risk-free interest rate of 0.66% based upon the five-year U.S. Treasury yield as of the date of grant. The options vest over a three-year period beginning one year from the date of grant. Based upon the foregoing factors, the grant date fair value of the stock options was determined to be $12.11 per share.

 

53
 

  

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

On December 12, 2012, the Compensation Committee granted a total of 12,983 shares of restricted stock to our executive officers. The restricted stock vests in full three years from the date of grant provided the recipient remains employed by us through that date. The grant date fair value of the restricted stock is based on the closing sales price of our common stock on the grant date which was $23.30 per share.

 

During fiscal 2012, options to purchase 500 shares were exercised, resulting in cash proceeds of approximately $1,000.

 

On March 15, 2012, the Compensation Committee granted a total of 6,475 shares of restricted stock to our non-employee directors. The restricted stock vests in full one year from the date of grant provided the recipient remains on the board of directors through that date. The grant date fair value of the restricted stock is based on the closing sales price of our common stock on the grant date which was $27.00 per share.

 

On December 14, 2011, the Compensation Committee granted a total of 45,236 stock options under the 2008 Plan to our executive officers. The fair value of the options was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 64%, expected term of the options of five years, dividend yield rate of 0% and a risk-free interest rate of .86% based upon the five-year U.S. Treasury yield as of the date of grant. The options vest over a three-year period beginning one year from the date of grant. Based upon the foregoing factors, the grant date fair value of the stock options was determined to be $11.50 per share.

 

On December 14, 2011, the Compensation Committee granted a total of 24,243 shares of restricted stock to our executive officers. The restricted stock vests in full three years from the date of grant provided the recipient remains employed by us through that date. The grant date fair value of the restricted stock is based on the closing sales price of our common stock on the grant date which was $21.45 per share.

 

A reconciliation of the Company’s restricted stock activity and related information is as follows:

 

       Weighted Average 
   Number of   Grant  Date 
   Shares   Fair Value 
           
Unvested at October 31, 2013   68,456   $23.01 
           
Shares granted   57,421    24.90 
Shares vested   (23,520)   24.42 
Shares cancelled   (13,609)   23.64 
Shares withheld   (7,710)   23.10 
           
Unvested at October 31, 2014   81,038   $23.83 

  

54
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

 

A summary of the status of the options as of October 31, 2014, 2013 and 2012 and the related activity for the year is as follows:

 

   Shares Under
Option
   Weighted
Average
Exercise Price
Per Share
 
Balance October 31, 2011   115,369   $20.66 
Granted   45,236    21.45 
Cancelled   (5,000)   26.69 
Expired        
Exercised   (500)   2.15 
Balance October 31, 2012   155,105   $20.75 
Granted   24,976    23.30 
Cancelled        
Expired        
Exercised   (11,369)   26.69 
Balance October 31, 2013   168,712   $20.73 
Granted        
Cancelled   (20,217)   25.59 
Expired        
Exercised   (20,306)   17.67 
Balance October 31, 2014   128,189   $20.45 

 

The total intrinsic value of stock options exercised during the twelve months ended October 31, 2014, 2013 and 2012 was approximately $424,000, $0 and $10,000, respectively.

 

As of October 31, 2014, the total intrinsic value of outstanding stock options already vested and expected to vest and the intrinsic value of options that are outstanding and exercisable was $2.3 million. Stock options outstanding and exercisable on October 31, 2014, are as follows:

 

Range of Exercise
Prices Per Share
   Shares Under
Option
   Weighted
Average Exercise
Price Per Share
   Weighted Average
Remaining Contractual
Life in Years
 
Outstanding               
$14.82    24,000   $14.82    5.1 
 14.88    17,000    14.88    4.5 
 18.13    16,000    18.13    5.5 
 21.45    37,841    21.45    7.1 
 23.30    20,848    23.30    8.1 
 26.69    2,500    26.69    2.0 
 35.83    10,000    35.83    3.6 
$  14.82 – 35.83    128,189   $20.45    6.0 
Exercisable                
$14.82    24,000   $14.82    5.1 
 14.88    17,000    14.88    4.5 
 18.13    16,000    18.13    5.5 
 21.45    25,227    21.45    4.8 
 23.30    6,949    23.30    2.7 
 26.69    2,500    26.69    2.0 
 35.83    10,000    35.83    3.6 
$14.82 – 35.83    101,676   $19.93    4.6 

  

55
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

10.         RELATED PARTY TRANSACTIONS

 

As of October 31, 2014, we owned approximately 35% of the outstanding shares of a Taiwanese-based contract manufacturer, Hurco Automation, Ltd. (HAL). HAL’s scope of activities includes the design, manufacture, sales and distribution of industrial automation products, software systems and related components, including control systems and components produced under contract for sale exclusively to us. We are accounting for this investment using the equity method. The investment of $3.1 million and $2.7 million at October 31, 2014 and 2013 is included in Investments and other assets, net on the Consolidated Balance Sheets. Purchases of product from HAL amounted to $9.3 million, $9.8 million and $10.2 million in 2014, 2013 and 2012, respectively. Sales of product to HAL were $1.4 million, $1.5 million and $1.8 million for the years ended October 31, 2014, 2013 and 2012, respectively. Trade payables to HAL were $2.3 million and $1.3 million at October 31, 2014 and 2013, respectively. Trade receivables from HAL were $255,000 and $287,000 at October 31, 2014 and 2013, respectively.

 

Summary unaudited financial information for HAL’s operations and financial conditions is as follows (in thousands):

 

   2014   2013   2012 
             
Net Sales  $12,063   $12,312   $12,252 
Gross Profit   1,759    1,949    1,735 
Operating Income (Loss)   468    544    340 
Net Income (Loss)   1,264    747    882 
                
Current Assets  $10,469   $8,755   $7,091 
Non-current Assets   3,065    2,820    2,610 
Current Liabilities   3,637    2,846    1,702 

 

11.         CONTINGENCIES AND LITIGATION

 

We are involved in various claims and lawsuits arising in the normal course of business. Pursuant to applicable accounting rules, we accrue the minimum liability for each known claim when the estimated outcome is a range of possible loss and no one amount within that range is more likely than another. We maintain insurance policies for such matters, and we record insurance recoveries when we determine such recovery to be probable. We do not expect any of these claims, individually or in the aggregate, to have a material adverse effect on our consolidated financial position or results of operations. We believe that the ultimate resolution of claims for any losses will not exceed our insurance policy coverages.

  

12.         GUARANTEES AND PRODUCT WARRANTIES

 

We follow FASB guidance for accounting for contingencies relating to the guarantor’s accounting for, and disclosures of, the issuance of certain types of guarantees.

 

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of machines to customers that use financing. We follow FASB guidance for accounting for contingencies with respect to these guarantees. As of October 31, 2014, we had 18 outstanding third party payment guarantees totaling approximately $1.5 million. The terms of these guarantees are consistent with the underlying customer financing terms. Upon shipment of a machine, the customer has the risk of ownership. The customer does not obtain title, however, until it has paid for the machine. A retention of title clause allows us to recover the machine if the customer defaults on the financing. We accrue for potential liabilities under these guarantees when we believe a loss is probable and can be estimated.

 

56
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

We provide warranties on our products with respect to defects in material and workmanship. The terms of these warranties are generally one year for machines and shorter periods for service parts. We recognize a reserve with respect to this obligation at the time of product sale, with subsequent warranty claims recorded against the reserve. The amount of the warranty reserve is determined based on historical trend experience and any known warranty issues that could cause future warranty costs to differ from historical experience. A reconciliation of the changes in our warranty reserve is as follows (in thousands):

 

   2014   2013   2012 
Balance, beginning of year  $1,778   $1,623   $1,725 
Provision for warranties during the year   3,846    3,811    3,473 
Charges to the accrual   (3,529)   (3,670)   (3,567)
Impact of foreign currency translation   (47)   14    (8)
Balance, end of year  $2,048   $1,778   $1,623 

 

The increase in the warranty reserve from fiscal 2013 to 2014 reflected higher sales volumes and anticipated claims of machines under warranty as well as the sale of a greater number of our higher-performance machines which have a higher cost per claim. The increase from fiscal 2012 to 2013 was a result of actual claims for specific warranties accrued in the prior year being more than anticipated, resulting in an adjustment to the provision for warranties during the year.

 

13.         OPERATING LEASES

 

We lease facilities, certain equipment and vehicles under operating leases that expire at various dates through 2024. Future payments required under operating leases as of October 31, 2014, are summarized as follows (in thousands):

 

2015  $3,325 
2016   2,407 
2017   1,662 
2018   1,057 
2019 and thereafter   1,403 
Total  $9,854 

 

Lease expense for the years ended October 31, 2014, 2013, and 2012 was $4.0 million, $3.6 million, and $3.3 million, respectively.

 

We recorded approximately $118,000 of lease income during fiscal 2014 from leasing 34,000 square feet of our Indianapolis facility. The lease expires on April 30, 2016.

 

57
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

14.          QUARTERLY HIGHLIGHTS (Unaudited)

 

   First
Quarter
   Second
Quarter
   Third
Quarter
   Fourth
Quarter
 
2014  (In thousands, except per share data)                    
Sales and service fees  $50,970   $53,731   $55,379   $62,223 
Gross profit   13,919    16,629    18,012    20,052 
Gross profit margin   27%   31%   33%   32%
Selling, general and administrative expenses   10,600    11,206    11,869    12,940 
Operating income   3,319    5,423    6,143    7,112 
Provision for income taxes   904    1,585    1,684    2,045 
Net income   2,369    3,536    4,375    4,863 
Income per common share – basic  $0.36   $0.54   $0.67   $0.74 
Income per common share – diluted  $0.36   $0.54   $0.66   $0.74 
                     

 

   First
Quarter
   Second
Quarter
   Third
Quarter
   Fourth
Quarter
 
2013 (In thousands, except per share data)                    
Sales and service fees  $44,085   $49,619   $45,158   $53,942 
Gross profit   12,916    15,283    11,715    15,142 
Gross profit margin   29%   31%   26%   28%
Selling, general and administrative expenses   8,920    10,679    10,012    11,802 
Operating income   3,996    4,604    1,703    3,340 
Provision for income taxes   1,445    1,329    263    1,215 
Net income   2,254    3,183    854    1,899 
Income per common share – basic  $0.35   $0.49   $0.13   $0.29 
Income per common share – diluted  $0.34   $0.48   $0.13   $0.29 

 

15.         SEGMENT INFORMATION

 

We operate in a single segment: industrial automation equipment. We design and produce interactive computer control systems and software, computerized machine tools, and machine tool components and accessories for sale through our own distribution network to the worldwide metal working market. We also provide software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

 

58
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

We sell our products through more than 100 independent agents and distributors throughout North America, Europe and Asia. Our line is the primary line for the majority of our distributors globally even though some may carry competitive products. We also have our own direct sales and service organizations in China, France, Germany, India, Italy, Poland, Singapore, South Africa, the United Kingdom, and certain areas of the United States, which are among the world's principal machine tool consuming countries. During fiscal 2014, no distributor accounted for more than 5% of our sales and service fees. In fiscal 2014, approximately 72% of our revenues were from overseas customers and no single end-user of our products accounted for more than 5% of our total sales and service fees.

 

The following table sets forth the contribution of each of our product groups to our total sales and service fees during each of the past three fiscal years (in thousands):

 

Net Sales and Service Fees by Product Category

 

  Year ended October 31, 
   2014   2013   2012 
             
Computerized Machine Tools **  $193,937   $166,896   $179,337 
Computer Control Systems and Software *   3,407    3,066    2,947 
Service Parts   17,391    16,474    15,299 
Service Fees   7,568    6,368    5,534 
Total  $222,303   $192,804   $203,117 

 

* Amounts shown do not include computer control systems and software sold as an integrated component of computerized machine systems.

** Amounts shown include sales of LCM electro-mechanical components to third parties since the date of acquisition on July 1, 2013.

 

The following table sets forth revenues by geographic area, based on customer location, for each of the past three fiscal years (in thousands):

 

Revenues by Geographic Area  Year Ended October 31, 
   2014   2013   2012 
             
North America  $62,247   $60,660   $60,500 
                
Germany   51,581    43,597    49,979 
United Kingdom   32,557    27,343    28,914 
Italy   13,456    8,738    6,038 
France   9,972    10,918    9,970 
Other Europe   24,728    22,738    23,145 
Total Europe   132,294    113,334    118,046 
                
Asia   23,766    17,401    23,216 
Other Foreign   3,996    1,409    1,355 
Total Foreign   160,056    132,144    142,617 
   $222,303   $192,804   $203,117 

  

59
 

 

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

 

Long-lived tangible assets, net by geographic area, were (in thousands):

 

   As of October 31, 
   2014   2013 
United States  $6,815   $6,523 
Foreign countries   6,017    7,063 
   $12,832   $13,586 

 

Net assets by geographic area were (in thousands):

 

   As of October 31, 
   2014   2013 
North America  $79,121   $69,450 
Europe   61,186    59,498 
Asia   24,338    22,543 
   $164,645   $151,491 

 

16.     NEW ACCOUNTING PRONOUNCEMENTS

 

In July 2013, the FASB issued ASU 2013-11, Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists, providing guidance on the presentation of unrecognized tax benefits, reflecting the manner in which an entity would settle, at the reporting date, any additional income taxes that would result from the disallowance of a tax position when net operating loss carryforwards, similar tax losses, or tax credit carryforwards exist. The amendments in this update are effective for fiscal years, and interim periods within those years, beginning after December 15, 2013. Early adoption is permitted. The amendments should be applied prospectively to all unrecognized tax benefits that exist at the effective date. Retrospective application is permitted. We do not expect that the adoption of this accounting standard update will have a material effect on our consolidated financial statements.

 

In May 2014, the FASB issued ASU 2014-09, Revenue from Contracts with Customers (Topic 606), establishing a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers. This update provides a five-step analysis in determining when and how revenue is recognized. The new model will require revenue recognition to depict the transfer of promised goods or services to customers in an amount that reflects the consideration a company expects to receive in exchange for those goods or services and will supersede most of the existing revenue recognition guidance, including industry-specific guidance. The amendments in this update are effective for fiscal years, and interim periods within those years, beginning after December 15, 2016. Early adoption is not permitted. We have the option of using either a full retrospective or modified approach to adopt this guidance. We are assessing the method of adoption and the impact this new accounting guidance will have on our consolidated financial statements.

 

60
 

  

Item 9.          Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

None.

 

Item 9A.       CONTROLS AND PROCEDURES

 

Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures as of October 31, 2014, pursuant to Rule 13a-15(b) under the Securities Exchange Act of 1934, as amended. Based upon that evaluation, our management, including the Chief Executive Officer and Chief Financial Officer, concluded that our disclosure controls and procedures were effective as of the evaluation date.

 

There have been no changes in our internal control over financial reporting that occurred during the fourth quarter of the fiscal year ended October 31, 2014 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

The attestation report of our independent registered public accounting firm on our internal control over financial reporting is included in this report under Item 8. Financial Statements and Supplementary Data. Our management’s annual report on internal control over financial reporting is included in this report immediately preceding Item 8.

 

61
 

  

Item 9B. OTHER INFORMATION

 

During the fourth quarter of fiscal 2014, the Audit Committee of the Board of Directors did not engage our independent registered public accounting firm to perform any new non-audit services. This disclosure is made pursuant to Section 10A(i)(2) of the Securities Exchange Act of 1934, as added by Section 202 of the Sarbanes-Oxley Act of 2002.

 

The following graph illustrates the cumulative total shareholder return on our common stock for the five-year period ended October 31, 2014, as compared to (1) the Russell 2000, (2) the peer group utilized for the immediate preceding fiscal year of 17 U.S. manufacturing companies (Ampco-Pittsburgh Corporation, The Eastern Company, Electro Scientific Industries, Inc., FARO Technologies, Inc., Flow International Corporation, GSI Group, Inc., Hardinge Inc., Kadant Inc., Kaydon Corporation, Key Tronic Corporation, The L.S. Starrett Company, NN, Inc., PDF Solutions, Inc., Proto Labs, Inc., QAD Inc., Transcat, Inc., Zygo Corporation) and (3) a new peer group, which included 14 of the 17 companies from the previous year (Flow International Corporation, Kaydon Corporation, Zygo Corporation were either acquired or taken private in the past 12 months), along with the following six new U.S. manufacturing companies: Douglas Dynamics, Inc., Dynamic Materials, Corp., Graham Corporation, Key Technology, Inc., Nanometrics Incorporated, and Sun Hydraulics Corp.

 

The Compensation Committee of our Board of Directors is using the new peer group to assist it in making compensation decisions. We believe the new peer group better reflects our operations. The comparisons in this table are required by the SEC and are not intended to forecast or be indicative of possible future performance of our common stock.

  

 

   10/09   10/10   10/11   10/12   10/13   10/14 
Hurco Companies, Inc.   100.00    115.72    164.28    144.53    154.60    245.43 
Russell 2000   100.00    126.58    135.07    151.39    206.31    222.95 
Old Peer Group   100.00    134.74    159.80    166.62    266.22    251.00 
New Peer Group   100.00    134.45    165.67    160.64    251.29    240.70 

 

62
 

 

PART III

 

Item 10.       DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2015 annual meeting of shareholders except that the information required by Item 10 regarding our executive officers is included herein under a separate caption at the end of Part I.

 

Item 11.       EXECUTIVE COMPENSATION

 

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2015 annual meeting of shareholders.

 

Item 12.       SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2015 annual meeting of shareholders.

 

Item 13.       CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2015 annual meeting of shareholders.

 

63
 

  

Item 14.         PRINCIPal ACCOUNTING FEES AND SERVICES

 

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2015 annual meeting of shareholders.

 

PART IV

 

Item 15.         Exhibits AND Financial Statement Schedules

 

(a) 1. Financial Statements.  The following consolidated financial statements of Registrant are included herein under Item 8 of Part II:

 

      Page
    Report of Independent Registered Public Accounting Firm 30
    Consolidated Statements of Income – years ended October 31, 2014, 2013 and 2012 32
    Consolidated Statements of Comprehensive Income – years ended October 31, 2014, 2013 and 2012 33
    Consolidated Balance Sheets – as of October 31, 2014 and 2013 34
    Consolidated Statements of Cash Flows – years ended October 31, 2014, 2013 and 2012 35
    Consolidated Statements of Changes in Shareholders’ Equity – years ended October 31, 2014, 2013 and 2012 36
    Notes to Consolidated Financial Statements 37

 

  2. Financial Statement Schedule.  The following financial statement schedule is included in this Item.

 

    Page
  Schedule II - Valuation and Qualifying Accounts and Reserves 65

 

  All other financial statement schedules are omitted because they are not applicable or the required information is included in the consolidated financial statements or notes thereto.

 

(b)     Exhibits

 

  Exhibits being filed with this Form 10-K or incorporated herein by reference are listed on page 66.

 

64
 

 

Schedule II - Valuation and Qualifying Accounts and Reserves

for the Years Ended October 31, 2014, 2013, and 2012

(Dollars in thousands)

 

Description  Balance at
Beginning
of Period
   Charged to
Costs and
Expenses
   Charged
to Other
Accounts
   Deductions   Balance
at End
of Period
 
Allowance for doubtful
accounts for the year ended:
                         
                          
October 31, 2014  $540   $446   $   $108(2)  $878 
                          
October 31, 2013  $384   $88   $124(1)  $56(2)  $540 
                          
October 31, 2012  $608   $88   $   $312(2)  $384 
                          
Income tax valuation allowance for the year ended:                         
                          
October 31, 2014  $1,199   $81   $   $55   $1,225 
                          
October 31, 2013  $460   $739   $   $   $1,199 
                          
October 31, 2012  $487   $360   $   $387   $460 

 

(1) Allowance for doubtful accounts acquired in LCM S.r.l. acquisition.

 

(2) Receivable write-offs.

 

65
 

 

EXHIBITS INDEX

 

Exhibits Filed. The following exhibits are filed with this report:

 

21 Subsidiaries of the Registrant.
23 Consent of Independent Registered Public Accounting Firm, Ernst & Young LLP
31.1 Certification by the Chief Executive Officer, pursuant to Rule 13a-15(b) under the Securities and Exchange Act of 1934, as amended.
31.2 Certification by the Chief Financial Officer, pursuant to Rule 13a-15(b) under the Securities and Exchange Act of 1934, as amended.
32.1 Certification by the Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2 Certification by the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS XBRL Instance Document*
101.SCH XBRL Taxonomy Extension Schema Document*
101.CAL XBRL Taxonomy Extension Calculation Linkbase*
101.LAB XBRL Taxonomy Taxonomy Extension Label Linkbase Document*
101.PRE XBRL Taxonomy Extension Presentation Linkbase Document*
101.DEF XBRL Taxonomy Extension Definition Linkbase Document*
   
* Pursuant to Regulation S-T, this interactive data file is deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, is deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, and otherwise is not subject to liability under these sections.

 

Exhibits Incorporated by Reference. The following exhibits are incorporated into this report:

 

3.1 Amended and Restated Articles of Incorporation of the Registrant, incorporated by reference to Exhibit 3.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 2000.
3.2 Amended and Restated By-Laws of the Registrant as amended through July 8, 2009, incorporated by reference to Exhibit 3.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 31, 2009.
10.2 Credit Agreement dated as of December 7, 2012 among Hurco Companies, Inc., the lenders party thereto and JP Morgan Chase Bank, N.A., incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed December 10, 2012.
10.3 First Amendment to Credit Agreement dated as of May 9, 2014 between Hurco Companies, Inc., JPMorgan Chase Bank, N.A. and the lenders signatory thereto, incorporated by reference to Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 31, 2014.
10.4 Second Amendment to Credit Agreement dated as of May 9, 2014 between Hurco Companies, Inc., JPMorgan Chase Bank, N.A. and the lenders signatory thereto, incorporated by reference to Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 31, 2014.
10.5 Third Amendment to Credit Agreement and Amendment to Subsidiary Guaranty dated as of December 5, 2014, between Hurco Companies, Inc. and JPMorgan Chase Bank, N.A., incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed December 8, 2014.
10.6* Employment Agreement dated March 15, 2012, between Hurco Companies, Inc. and Michael Doar, incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed March 16, 2012.
10.7* Employment Agreement dated March 15, 2012, between Hurco Companies, Inc. and John G. Oblazney, incorporated by reference to Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed March 16, 2012.
10.8* Employment Agreement dated March 15, 2012, between Hurco Companies, Inc. and John P. Donlon, incorporated by reference to Exhibit 10.3 to the Registrant’s Current Report on Form 8-K filed March 16, 2012.
10.9* Employment Agreement dated March 15, 2012, between Hurco Companies, Inc. and Gregory S. Volovic, incorporated by reference to Exhibit 10.4 to the Registrant’s Current Report on Form 8-K filed March 16, 2012.
10.10* Employment Agreement dated March 15, 2012, between Hurco Companies, Inc. and Sonja K. McClelland, incorporated by reference to Exhibit 10.5 to the Registrant’s Current Report on Form 8-K filed March 16, 2012.
10.11* Amended 1997 Stock Option and Incentive Plan, incorporated by reference as Exhibit 10 to the Registrant’s Quarterly Report on Form 10-Q filed for the quarter ended July 31, 2005.
10.12* Hurco Companies, Inc. 2008 Equity Incentive Plan, incorporated by reference to Appendix A of the Registrant’s definitive Proxy Statement on Schedule 14A filed January 28, 2008.
10.13* Form of restated split-dollar insurance agreement, incorporated by reference to Exhibit 10.2 to the Registrant’s Annual Report on Form 10-K for the year ended October 31, 2008.
10.14* Form of Restricted Stock Award Agreement – Employee, incorporated by reference to Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended January 31, 2011.
10.15* Form of Restricted Stock Award Agreement – Director, incorporated by reference to Exhibit 10.2 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended January 31, 2011.
   
* The indicated exhibit is a management contract, compensatory plan or arrangement required to be listed by Item 601 of Regulation S-K.

 

66
 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized, this 9th day of January, 2015.

 

  HURCO COMPANIES, INC.
     
  By: /s/ Sonja K. McClelland
    Sonja K. McClelland
    Vice-President, Secretary,
    Treasurer and
    Chief Financial Officer

 

67
 

  

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:

 

Signature and Title(s)   Date
     
     
/s/ Michael Doar   January 9, 2015
Michael Doar, Chairman of the Board,    
Chief Executive Officer    
of Hurco Companies, Inc.    
(Principal Executive Officer)    
     
/s/ Sonja K. McClelland   January 9, 2015
Sonja K. McClelland    
Vice President,    
Secretary, Treasurer and    
Chief Financial Officer    
of Hurco Companies, Inc.    
(Principal Financial Officer
and Principal Accounting Officer)
   
     
/s/ Robert W. Cruickshank   January 9, 2015
Robert W. Cruickshank, Director    
     
/s/ Philip James   January 9, 2015
Philip James, Director    
     
/s/ Michael P. Mazza   January 9, 2015
Michael P. Mazza, Director    
     
/s/ Andrew Niner   January 9, 2015
Andrew Niner, Director    
     
/s/ Richard Porter   January 9, 2015
Richard Porter, Director    
     
/s/ Janaki Sivanesan   January 9, 2015
Janaki Sivanesan, Director    
     
/s/ Ronald Strackbein   January 9, 2015
Ronald Strackbein, Director    

 

68